2013 SC Nismo stage 1.5 GTM

elperuano · 03-26-2013, 03:22 PM

Quote:

Originally Posted by Baer383

Pulley size 88mm =11 psi
The engine makes about 625 HP 464 TQ
I don't know what graf you are talking about other than the dyno sheet shown above.

Wow didn't see this! Is this what ur car made with that pulley?

Baer383 · 03-26-2013, 03:31 PM

Quote:

Originally Posted by elperuano

Wow didn't see this! Is this what ur car made with that pulley?

Yeah with the 88 mm pulley but the 625 is at the motor not the wheels.

elperuano · 03-26-2013, 03:40 PM

Ur final numbers at the wheels were 516 with the same pulley?

Baer383 · 03-26-2013, 03:57 PM

Quote:

Originally Posted by elperuano

Ur final numbers at the wheels were 516 with the same pulley?

Yeah the 88mm

elperuano · 03-26-2013, 04:22 PM

Those r great numbers. Didnt think you would lose so much hp to the wheels.

Baer383 · 03-26-2013, 05:46 PM

Quote:

Originally Posted by elperuano

Those r great numbers. Didnt think you would lose so much hp to the wheels.

If you take 350 hp and X it by .825 you get 288 rwhp stock Nismo
So take 625 hp and X it by .825 you get 516 rwhp Super charged Nismo

Close enough

SPOHN · 03-26-2013, 06:41 PM

Sneaky post.

blueranger · 03-26-2013, 10:52 PM

Congrats on your whp numbers that is great!

May I ask what kind transmission mods (cooler, vb upgrade) you had on your 2010 if any?

Baer383 · 03-27-2013, 11:51 AM

Quote:

Originally Posted by blueranger

Congrats on your whp numbers that is great!

May I ask what kind transmission mods (cooler, vb upgrade) you had on your 2010 if any?

I had a 25 row oil cooler and a 25 row trans cooler both with a 6.5 in Spal electric fan and that's it.

Gaston370Z · 04-04-2013, 09:26 AM

Would you happen to know how much the entire 1.5 supercharger kit weighs?

Baer383 · 04-04-2013, 09:31 AM

Quote:

Originally Posted by Gaston370Z

Would you happen to know how much the entire 1.5 supercharger kit weighs?

My box weighted about 85lbs

03-26-2013, 06:41 PM	#7 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 47 Posts: 14,844 Drives: Waiting on next Z Rep Power: 223	Sneaky post. Baer383 likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My New 2013 Nismo	DavidB123	Nismo 370Z	207	02-26-2013 05:12 PM
2013 PW Nismo	NINJA	New Nismo 370Z Owner	30	02-01-2013 10:17 AM
Nismo 2013 #40	Achille	Nismo 370Z	21	11-19-2012 11:19 PM
DIY: Fender Lining Vent for Oil Cooler GTM Supercharger Stage 1 on NISMO	wind.zero	DIY Section (Do-It-Yourself)	14	04-19-2012 02:49 PM
Jotech Motorsports: GTM Stage 1 SC Turn Key 2011 NISMO	wind.zero	Forced Induction	103	04-19-2012 08:24 AM

03-26-2013, 03:40 PM	#3 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 30	Ur final numbers at the wheels were 516 with the same pulley?

03-26-2013, 04:22 PM	#5 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 30	Those r great numbers. Didnt think you would lose so much hp to the wheels.

03-26-2013, 10:52 PM	#8 (permalink)
blueranger Track Member Join Date: Aug 2012 Location: Albuquerque NM Posts: 577 Drives: 2010 Roadster 7AT Rep Power: 308	Congrats on your whp numbers that is great! May I ask what kind transmission mods (cooler, vb upgrade) you had on your 2010 if any?

04-04-2013, 09:26 AM	#10 (permalink)
Gaston370Z Base Member Join Date: Aug 2012 Location: Minot AFB North Dakota Posts: 41 Drives: 10 Nssn 370Z Red M6 Rep Power: 14	Would you happen to know how much the entire 1.5 supercharger kit weighs?