Nissan 370Z Forum
Page 5 of 9 « First 34 5 67 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Real Auto Dynamics built and R/T tuned built motor TT (http://www.the370z.com/forced-induction/60281-real-auto-dynamics-built-r-t-tuned-built-motor-tt.html)

Mr.Squeeze 11-07-2012 05:00 PM
Quote:
Originally Posted by fuct (Post 2005555)
SICK MAN! how many pounds are you running on a day to day basis, ie. which one do you feel safest using?
Low Boost 14 PSI is more than enough in this cold North east weather right now.

elperuano 11-07-2012 06:15 PM
Congrats man, that exhaust really opened up the ponies! I hope to follow this path one day!

Nixlimited 11-07-2012 06:25 PM
Quote:
Originally Posted by Mr.Squeeze (Post 2005523)
Yes I have the HKS EVC S boost controller.
You have probably answered this already, but are you using custom gauges, and if so what kind? I have been looking at Defi Racer (because I think 52mm is what fits best) and the PLX gauges. Just noticed the newer PLX do not have the outer ring of LEDs, which is kind of a bummer.

Edit: sorry, just saw the gauges on the first page of the thread. Any advice on install in factory location?

Mr.Squeeze 11-08-2012 01:18 AM
Quote:
Originally Posted by Nixlimited (Post 2005663)
You have probably answered this already, but are you using custom gauges, and if so what kind? I have been looking at Defi Racer (because I think 52mm is what fits best) and the PLX gauges. Just noticed the newer PLX do not have the outer ring of LEDs, which is kind of a bummer.

Edit: sorry, just saw the gauges on the first page of the thread. Any advice on install in factory location?

I have a few pictures that I took during the process that I will put up once I make my thread in the members gallery. I will say this much you need a dremel to make the Def'si fit, I also used black black silicone for a tight fit.

Nixlimited 11-08-2012 09:05 AM
Quote:
Originally Posted by Mr.Squeeze (Post 2006063)
I have a few pictures that I took during the process that I will put up once I make my thread in the members gallery. I will say this much you need a dremel to make the Difi fit, I also used black black silicone for a tight fit.
Cool. Did you use the Defi Racer gauges?

Mr.Squeeze 11-08-2012 10:17 AM
Quote:
Originally Posted by Nixlimited (Post 2006330)
Cool. Did you use the Defi Racer gauges?
Yes I have the 52mm Racer gauges.

Nixlimited 11-08-2012 11:31 AM
Quote:
Originally Posted by Mr.Squeeze (Post 2006471)
Yes I have the 52mm Racer gauges.
Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

Blaizon 11-08-2012 11:33 AM
Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me ;)

elperuano 11-08-2012 12:30 PM
^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?

Mr.Squeeze 11-08-2012 07:49 PM
Quote:
Originally Posted by Blaizon (Post 2006579)
Sick looking graphs Cliff! I can't imagine how the car feels now...once I get my twins I can't wait to run you to see how bad of a whoopin you put on me ;)
I cant wait for you to pull the trigger man and get the twins.



Quote:
Originally Posted by elperuano (Post 2006710)
^lol his low boost setting is higher than my max but the numbers respond with what I'm runnin on 12 lbs (the only setting I use lol). Too bad ur not In south Florida I'd love to see this machine! How long was the downtime when u went with the built motor?
The engine was built last year took 3-4 month's for it to get built, I had to wait for my custom piston's that took 8 weeks to come during that time also.

Mr.Squeeze 02-10-2013 05:56 PM
Quote:
Originally Posted by Nixlimited (Post 2006575)
Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?

Just Saw my fault for being month's late on the reply I used the stock location ran a T off of it .

Baer383 02-10-2013 06:54 PM
Quote:
Originally Posted by Nixlimited (Post 2006575)
Where did you tap oil temp and pressure? I am getting ready to do a radiator swap and to add an oil cooler and I am trying to plan out the system and connections. Do any sandwich plate adapters include ports for those?
I used this very easy and a great solution.

Derale Performance Inline Fan Thermostats 35021 - SummitRacing.com

Nixlimited 02-10-2013 08:10 PM
Thank you both.

swiss370Z 02-17-2013 10:09 AM
Quote:
Originally Posted by Mr.Squeeze (Post 1998927)
Hey Mr.Squeeze

I can not get enough from this dyno pull! :tup:

Absolutely incredible
Looks and sounds as if the booth collapses from the performance! :icon18:

Really Impressive!
Well done

Greetings from Switzerland

Mr.Squeeze 02-20-2013 04:18 PM
Quote:
Originally Posted by swiss370Z (Post 2169787)
Hey Mr.Squeeze

I can not get enough from this dyno pull! :tup:

Absolutely incredible
Looks and sounds as if the booth collapses from the performance! :icon18:

Really Impressive!
Well done

Greetings from Switzerland

Thanks :tup:


All times are GMT -5. The time now is 03:38 PM.
Page 5 of 9 « First 34 5 67 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2