Engine Build

esfourteen

For anyone curious, this is the support bracket RealAutoDynamics made for my driver side turbo. it's hard to see in the picture but its actually attached to 2 of the manifold studs and then to the front half of the turbo. Ideally this will prevent the cracking issue but it should at last prolong the life of the manifold.

__________________
Build Thread | GTM TT Install Thread | Engine Build Thread

Chuck33079

Any chance of them making more of those? I'd buy a set to have on the shelf if my motor ever comes out.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

esfourteen

I can ask but I have a feeling the tech wont want to take this bracket off again, its quite a pain to get it installed with the turbo as you can imagine due to the tight clearances.

__________________
Build Thread | GTM TT Install Thread | Engine Build Thread

Chuck33079

Cool, let them know there's definitely a small market of guys who would be interested, as well as for the rerouted water lines for the turbos. They might be able to make some coin if they had a kit to fix the couple of bad decisions GTM made with their kits.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Mr.Squeeze

I saw the bracket and rerouted water lines in person yesterday at R.A.D it's definitely nice

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

Ron

Count me in for both if they do.

__________________
2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread
[ GTM GTX Stg2 TT || HKS EVC6 || Custom CarPC || F.I 3'' TDX CBE || SB 6puck clutch/ZSpeed CSC || BC BR Coilovers || SPC camber arms || Work VSS-X || Custom Headlights || PW:JDM CF Covers || Seibon CF Engine Cover ]