Boosted Performance single turbo results

Plasmite

Could anyone who has this kit please post current opinions?

__________________
WISHLIST

jwick

I've not heard any complaints about it yet.

Oh other than the No RHD and No AT but that won't affect you.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jlo370z

my car is faster then sh&%

thats my opinion

__________________
❝The Jlo370Z Build❞
523HP | 455 ftb tq | 11.5 PSI | 93 Octane
2017 Porsche 991.2 C4!l

jwick

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

GaleForce

I have over 6k miles on it since I installed the BP kit. No issues other than sticking TiAL BOV springs (not BP's fault). The kit is very simple in terms of installation. If a problem or issue were to arise in the future, it would be very simple to trouble shoot and fix the problem as there is no need to pull the motor.

__________________

Cell

How did you find out it was sticking and what did you do to fix it?

GaleForce

The car would lean out at idle and stall unless I gave it some throttle. After some trouble shooting with the engine running I noticed a different noise coming from the BOV's, then I noticed they were stuck open.

The fix?

I emailed TiAL for a solution, because after a quick Google search, I noticed this seems to be a common issue. There has been no response from TiAL I have emailed several times, no response. They don't have a phone number listed so I can't even call them.

Bottom line, not fixed yet.

__________________

Cell

Damn... this sucks. I guess I will be looking for a fix it in the future.

Plasmite

Seems to be the only way to fix the issue...

__________________
WISHLIST

TopgunZ

Were everyones oil lines and pipes labeled? Mine werent and now im hitting some problems because of it. The manual shows the oil lines off the sandwich plate running two different ways and now the way I ran mine are in the way of the charge pipe. Not even sure my charge pipe is in the right way as of now.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

blackonorange

Mine weren't labeled either but I figured it out. I'm not sure how you ran yours but from memory 1 goes to the filter and the other one goes to the oil cooler. It's pretty easy to zip tie them out of the way

Boosted Performance

If yo look at the car from the front:

Shortest line goes from lower sandwich plate port to left hand port on new oil filter housing port.

The line with a 45 degree end goes from new oil filter housing right hand side to right hand side of the oil cooler.

Longest line with two 90 degree fittings goes from left hand oil cooler fitting to top of the oil sandwich plate.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

GaleForce

That's fine but I can't get anyone from TiAL to respond. I can't order replacement parts to repair my like new BOV's.

__________________

Plasmite

Thanks for the input. Currently browsing your build thread, all 100 pages of it lol Only at page 30 so far...

You do very impressive work! I think I will have to place an order for an A pillar one day....

__________________
WISHLIST

GaleForce

No problem! And thanks for the compliment!

__________________