Boosted Performance single turbo build

Boosted Performance · 04-30-2012, 02:00 PM

Vacuum blocks will work just fine. There is a rather large vacuum port at the back of the manifold (have picture on home computer) that can be used for this. I don't see a problem with it at all. I think it goes in to the cabbin (fire wall)..can't remember now. It is at least 3/8", so plenty big.

Cell · 04-30-2012, 02:01 PM

I will probably go with a vacuum block instead of drilling.

Nixlimited · 04-30-2012, 04:23 PM

Quote:

Originally Posted by Cell

I will probably go with a vacuum block instead of drilling.

I like that idea better too. Would love to see instructions on that.

Boosted Performance · 04-30-2012, 07:59 PM

Quote:

Originally Posted by Nixlimited

I like that idea better too. Would love to see instructions on that.

There really is not need for instructions. These things are as simple as you could get.

The inlet (npt x npt nipple in pic below) goes to a manifold vacuum source, and then just take the outlets to whatever needs a vacuum source:

Nixlimited · 04-30-2012, 11:07 PM

Quote:

Originally Posted by Boosted Performance

There really is not need for instructions. These things are as simple as you could get.

The inlet (npt x npt nipple in pic below) goes to a manifold vacuum source, and then just take the outlets to whatever needs a vacuum source:

[/IMG]

Nice! Should have used one of these on my STi.

Dzel · 05-01-2012, 07:09 AM

I got the ok from the wife to buy this kit!!! Sasha are you going to provide a pre tune with the kit?

05-01-2012, 07:09 AM	#6 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	I got the ok from the wife to buy this kit!!! Sasha are you going to provide a pre tune with the kit? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 10:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 10:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 08:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM

04-30-2012, 02:00 PM	#1 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3384	Vacuum blocks will work just fine. There is a rather large vacuum port at the back of the manifold (have picture on home computer) that can be used for this. I don't see a problem with it at all. I think it goes in to the cabbin (fire wall)..can't remember now. It is at least 3/8", so plenty big.

04-30-2012, 02:01 PM	#2 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 23	I will probably go with a vacuum block instead of drilling.