![]() |
I'm bring the thread back from the dead b/c after checking my data logs on my MAF volts they are maxed out @5.03 volts now my car pulls hard but
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#18 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2010
Location: Lawrenceville,Ga
Posts: 4,293
Drives: My foot up your azz
Rep Power: 31 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I'm bring the thread back from the dead b/c after checking my data logs on my MAF volts they are maxed out @5.03 volts now my car pulls hard but high RPM it doesn't quite pull as hard as it has in the past.
And by the way I'm @471rwhp and on meth it is 496rwhp well below the 600rwhp people have stated the stock MAF are good for.(I have a GTM Stage 1.5 SC 11psi) On the Cipher bank 1 and bank 2 are very consistent until the volts start going up high,then bank 1 is very erratic and it my be bad(I haven't got that far).(also been throwing code P0106) Anybody has any comments or advise chime in as I'm doing my homework now.
__________________
2013 ZL1 754 rwhp 747 rwtq
Last edited by Baer383; 06-24-2012 at 07:57 PM. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [WTB] WTT SoCAL: CF Spoiler for Stock SILVER & Front Bumper w/ Lip and Stash for Stock | Juan@AEperformance | Parts for sale (Private Classifieds) | 6 | 01-10-2012 01:32 PM |
| Can i change my stock HID bulb on my 370z to a 6000k and keep the stock ballast? | MyYellow370z | DIY Section (Do-It-Yourself) | 2 | 06-14-2011 10:47 PM |
| Swap TPMS from stock 18's to stock 19" Rays | CAN-ZED | Wheels & Tires | 12 | 03-29-2011 07:58 AM |
| More agressive offset on stock wheel and stock height? | whoady4shoady | Nismo 370Z | 3 | 02-07-2011 02:56 PM |
| SSR PROFESSOR MS1 2 IN STOCK, TYPE F 3 COLORS IN STOCK from AMPLIFIED MOTORSPORT | LOU@AMPLIFIED | Tires/Wheels | 33 | 12-04-2009 06:35 PM |