First STILLEN Supercharger 370Z swiss

Shamrock · 11-02-2013, 04:59 PM

Your post and pics were great. Just bought the stillen and my country is way behind in FI sports cars. I have the akropovitch and stillen headers and cats how many hp (at the wheel) should I be able to get with the uprev tune? Thanks

swiss370Z · 11-03-2013, 10:01 PM

Hello

With a good tune (not STILLEN) and your exhaust system
do you come about to 460 - 500 HP
Maybe something more ...

The power at the wheel, I can only estimate
Power loss to the wheel, we estimate between 12 - 16%

(See the calculator in the link
It is impossible to calculate these values accurately, this information should be used as a rough guide only)

Wheel Horsepower to Crankshaft Horsepower Guestimator

Hope I could help you that way
Do not forget to install the additional oil cooler

Greetings
Ivo

ANMVQ · 11-04-2013, 02:20 PM

Careful with the headers and HFC's Stillen themselves
Don't recomend running them , I don't either @ 11-12 psi your at the blocks limit ( very close ) just get all your info before you spend $$$ on replacing the motor .

swiss370Z · 01-21-2014, 12:32 PM

"FROZENBOOST" Water to Air Intercooler

Air to Water Heat Exchanger

Many Thanks to ANMVQ for the Tip!

I ordered the intercooler a week ago!
Today it was delivered (of the States to Switzerland)
Respect!

And the intercooler looks great
Super product and the delivery was very fast!

In the coming months, I will install the intercooler and Report the result

Stay tuned

Ivo

future370zzz · 01-21-2014, 02:39 PM

Nice. Please post some photos of how it will mount because there is not much room with the intake filters and oil cooler. Maybe it goes in front of everything.

Thanks

ANMVQ · 01-22-2014, 11:34 AM

Hey Ivo, You welcome man!! Looking GOOD! Any time I can help out let me know.. in too for installed pics to, Wish I took some the few days I had it .

Realale · 01-22-2014, 11:37 AM

I have this on mine. Took a little cutting of the Nismo grill but does good.

ANMVQ · 01-22-2014, 01:05 PM

I only had to cut off my tow hitch thingy.

Realale · 01-22-2014, 01:06 PM

I just screwed it right to the crash bar

ANMVQ · 01-22-2014, 01:07 PM

I couldn't :/ . I wanted mine centered. Not sure how different the Z is from the G in the front tho. But mine had to go.

Realale · 01-22-2014, 02:11 PM

Must be different because I got mine perfectly centered and didn't have to cut the tow hook

Realale · 01-22-2014, 02:27 PM

swiss370Z · 01-22-2014, 02:47 PM

Hey Guys

Thanks for the replys and PIC!

I will document the Installation

swiss370Z · 01-23-2014, 11:35 AM

Quote:

Originally Posted by future370zzz

Maybe it goes in front of everything

That is the plan

future370zzz · 01-23-2014, 02:53 PM

Quote:

Originally Posted by Realale

Must be different because I got mine perfectly centered and didn't have to cut the tow hook

Did you notice any difference in oil temps since the heat exchanger is now in front of everything?

11-03-2013, 10:01 PM	#77 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 16	Hello With a good tune (not STILLEN) and your exhaust system do you come about to 460 - 500 HP Maybe something more ... The power at the wheel, I can only estimate Power loss to the wheel, we estimate between 12 - 16% (See the calculator in the link It is impossible to calculate these values accurately, this information should be used as a rough guide only) Wheel Horsepower to Crankshaft Horsepower Guestimator Hope I could help you that way Do not forget to install the additional oil cooler Greetings Ivo __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

11-04-2013, 02:20 PM	#78 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Careful with the headers and HFC's Stillen themselves Don't recomend running them , I don't either @ 11-12 psi your at the blocks limit ( very close ) just get all your info before you spend $$$ on replacing the motor . 370Zsteve likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-22-2014, 11:34 AM	#81 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Hey Ivo, You welcome man!! Looking GOOD! Any time I can help out let me know.. in too for installed pics to, Wish I took some the few days I had it . swiss370Z likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-22-2014, 11:37 AM	#82 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 15	I have this on mine. Took a little cutting of the Nismo grill but does good. ANMVQ likes this.

01-22-2014, 01:05 PM	#83 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	I only had to cut off my tow hitch thingy. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

11-02-2013, 04:59 PM	#76 (permalink)
Shamrock Base Member Join Date: Apr 2012 Location: Israel Posts: 215 Drives: 370z 2011 AT White Rep Power: 14	Your post and pics were great. Just bought the stillen and my country is way behind in FI sports cars. I have the akropovitch and stillen headers and cats how many hp (at the wheel) should I be able to get with the uprev tune? Thanks

01-21-2014, 02:39 PM	#80 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 15	Nice. Please post some photos of how it will mount because there is not much room with the intake filters and oil cooler. Maybe it goes in front of everything. Thanks

01-22-2014, 01:06 PM	#84 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 15	I just screwed it right to the crash bar

01-22-2014, 01:07 PM	#85 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	I couldn't :/ . I wanted mine centered. Not sure how different the Z is from the G in the front tho. But mine had to go. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-22-2014, 02:11 PM	#86 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 15	Must be different because I got mine perfectly centered and didn't have to cut the tow hook

01-22-2014, 02:27 PM	#87 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 15	370Zsteve, swiss370Z and dajw like this.

01-22-2014, 02:47 PM	#88 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 16	Hey Guys Thanks for the replys and PIC! I will document the Installation __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN 370Z Supercharger System - Announcement!!!	Kyle@STILLEN	Forced Induction	2643	01-02-2022 09:28 PM
370Z Stillen supercharger DIY instructions	wortmeister	DIY Section (Do-It-Yourself)	11	06-01-2012 07:09 AM
Stillen Intercooled Supercharger for the 370z!	DriveLineEric	Drivetrain/Engine	14	03-09-2011 04:31 PM
370z/G37 Stillen Supercharger Kit - Like new Condition	weiboy718	Parts for sale (Private Classifieds)	64	01-30-2011 11:28 AM
STILLEN Introduces 515hp Supercharger System for Nissan 370Z / Infiniti G37	speed_BMW330i	Forced Induction	11	03-31-2010 09:58 AM