Nissan 370Z Forum  

First top mount single turbo 370Z

Originally Posted by Nixlimited I assume the injectors in the left bank of cylinders will be pulsed according to the reading of MAF 1 and the injectors in the right

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree11Likes

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-18-2011, 04:58 PM   #10 (permalink)
Base Member
 
Join Date: Nov 2009
Location: Plano, TX
Posts: 74
Drives: 09 G37S Sedan 6MT
Rep Power: 17
jran76 is on a distinguished road
Default

Quote:
Originally Posted by Nixlimited View Post
I assume the injectors in the left bank of cylinders will be pulsed according to the reading of MAF 1 and the injectors in the right bank of cylinders will be pulsed according to the reading of MAF 2. One of the drawbacks of 1 MAF is the assumption that air metered by the MAF is equally distributed to the different cylinders. I assume 2 MAFs helps mitigate this issue; however, as we have seen with this project, that does not hold true when the piping is changed. I hate MAFs altogether. Give me MAP metering any day!
The air from both intakes (and MAF's) all ends up in the same place. They are not divided inside the plenum/manifold, and the runners are in a row down the middle so they are pulling air from both intakes at the same time as it is mixed inside the plenum. The ECU just sees the air flow (voltage) from both MAF's and calculates the two together as the total amount of air going in. If each intake only went to one bank of (3) cylinders, the OP would have to re-do the piping to have somewhat even airflow to each side. Since the air is mixed inside the plenum, they are going to overcome the issue by allowing more airflow on one side than the other, and upgrading the MAF's to handle more airflow/voltage on that one side that has more airflow (really a band-aide for the uneven airflow, but it will work with the way our intake plenum and runners are setup).

Edit: The above is not correct. After looking at some pics and the service manual, it is split inside the manifold, and the ECU is looking at the MAF signals as Bank 1 and Bank 2.
__________________
2009 G37S Sedan-6MT: Advan / Volk / Tein / SPC / Invidia / Cobb / K&N

Last edited by jran76; 05-18-2011 at 06:15 PM.
jran76 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS/FT: 300zx w/ Skyline GTR RB26 Single Turbo Swap 5 Speed Z-Creations Cars for sale (Private Classifieds) 0 01-23-2011 02:06 PM
First STS rear mount turbo 370Z??? atx370z Nissan 370Z General Discussions 24 10-14-2010 02:53 PM
***370z needed: Single turbo kit development*** Chris@FsP Texas 0 01-06-2010 02:05 PM
300ZX vs. Single Turbo Supras Mercennarius Other Vehicles 9 09-14-2009 08:59 PM
Will we see a SINGLE turbo kit? Brazilbro Forced Induction 17 07-03-2009 04:03 PM


All times are GMT -5. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2