Forced Induction Finished Builds

theDreamer · 12-05-2012, 07:35 AM

Quote:

Originally Posted by conmam

Hi... Power is killer, awesome. However, I am very concerned about possible driveability issues with any FI mods. Please let me know if the car runs reliable 100% as stock ( with much more power of course ). I hope for no erratic , rough idling during hot or cold temps, no bogging, no hard starting at any temps oe condition etc...... Thank you for answering.

That is all going to come down to your tuner & how he tunes your car.

blackbird · 10-09-2012, 02:13 PM

6MT. High 400s on Torque. Print outs lost in boxes somewhere (preparing to move) Didn't remember the numbers, was more interested in RWHP.

Beastz · 10-20-2012, 03:40 AM

Guys im after some info on the exhausts you are using on your twin turbo 370z, im in aus and just finished a twin turbo and 4.2L stroke build. Currently have a 2 1/4" setup and will obviously need to look at 3". Now Greddy Australia dont make them and Greddy USA will not send one internationally due to product codes or some ********.

Dembflyr · 10-20-2012, 09:34 AM

Check out Fast Intentions. They make a 3".

blackbird · 10-21-2012, 10:30 AM

Running with Stillen exhausts and Stillen HFCs.

tower74 · 10-28-2012, 09:01 PM

Ok this should be my final numbers for this build. It will get a final tune in about a week...

2009 370z
AT7
945' above sea level
14,000 miles on the kit
Berk Test Pipes
STS Single Rear Mount Kit
I can take a pic of the whole page if you would like...

Best numbers: 481hp 427lb tq at 9psi
Test pipes were added about 300miles ago...due to the fact I burnt the cats up....

tturbo370z · 10-29-2012, 12:05 AM

Quote:

Originally Posted by tower74

Ok this should be my final numbers for this build. It will get a final tune in about a week...

2009 370z
AT7
945' above sea level
14,000 miles on the kit
Berk Test Pipes
STS Single Rear Mount Kit
I can take a pic of the whole page if you would like...

Best numbers: 481hp 427lb tq at 9psi
Test pipes were added about 300miles ago...due to the fact I burnt the cats up....

Congrats brother! Hope all turns out well.

tower74 · 10-29-2012, 11:20 AM

Quote:

Originally Posted by tturbo370z

Congrats brother! Hope all turns out well.

You me both. It's been an almost 2 year nightmare. I guess good things do come to those who wait.

tturbo370z · 10-29-2012, 12:06 PM

Quote:

Originally Posted by tower74

You me both. It's been an almost 2 year nightmare. I guess good things do come to those who wait.

Wow I am in a similar boat but only around 5mos. I hope that old saying is true for the both of us

good luck and let us know how it turns out

tower74 · 10-28-2012, 09:19 PM

Full version...kinda if you tape it together

theDreamer · 10-30-2012, 12:07 PM

Added, nice numbers.

theDreamer · 11-19-2012, 06:36 AM

Small update for one member: Baer383 - 2010 370z 7AT GTM Stage 1.5 SC at 11PSI - 515HP & 383TQ. All was done with just an adjusted tune, he was at 480HP & 350TQ

Mr&Mrs · 11-19-2012, 08:05 AM

He has a Nismo now also I think the 7AT needs to be changed.

theDreamer · 11-19-2012, 08:05 AM

Quote:

Originally Posted by Mr&Mrs

He has a Nismo now also I think the 7AT needs to be changed.

Naaaaaah.

elperuano · 11-19-2012, 07:35 PM

Looked over the thread and trying to see if anyone is running higher in torque on stock block than me?

10-20-2012, 09:34 AM	#4 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 18	Check out Fast Intentions. They make a 3". __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

10-30-2012, 12:07 PM	#11 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4212	Added, nice numbers. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

11-19-2012, 06:36 AM	#12 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4212	Small update for one member: Baer383 - 2010 370z 7AT GTM Stage 1.5 SC at 11PSI - 515HP & 383TQ. All was done with just an adjusted tune, he was at 480HP & 350TQ __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

11-19-2012, 08:05 AM	#13 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	He has a Nismo now also I think the 7AT needs to be changed. __________________ Project Z <--Click - Check out the link too many mods to list!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-09-2012, 02:13 PM	#2 (permalink)
blackbird Base Member Join Date: May 2009 Location: Nashua NH Posts: 179 Drives: 09 370Z BLk GTM TT Rep Power: 18	6MT. High 400s on Torque. Print outs lost in boxes somewhere (preparing to move) Didn't remember the numbers, was more interested in RWHP.

10-20-2012, 03:40 AM	#3 (permalink)
Beastz Base Member Join Date: Feb 2011 Location: Brisbane, Australia Posts: 15 Drives: 4.2L TT 370Z Rep Power: 16	Guys im after some info on the exhausts you are using on your twin turbo 370z, im in aus and just finished a twin turbo and 4.2L stroke build. Currently have a 2 1/4" setup and will obviously need to look at 3". Now Greddy Australia dont make them and Greddy USA will not send one internationally due to product codes or some ********.

10-21-2012, 10:30 AM	#5 (permalink)
blackbird Base Member Join Date: May 2009 Location: Nashua NH Posts: 179 Drives: 09 370Z BLk GTM TT Rep Power: 18	Running with Stillen exhausts and Stillen HFCs.

11-19-2012, 07:35 PM	#15 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 30	Looked over the thread and trying to see if anyone is running higher in torque on stock block than me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 12:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 04:20 PM