GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond

Reality · 08-11-2011, 07:28 AM

Quote:

Originally Posted by APOCOLYPSE DAWN

You know I was going to come on here and write a huge long reply to this thread. but I am going to make this short:

First of all I am not a kid of any sort... Do I care what seems to be what a circle jerk group here on this forum thinks... nah not really. Did I update the original thread with the car is now being used for product development... yes and did I not also mention the car was pulled from the shop for over a month.... yes to that as well.

Secondly, whether you choose to believe it or not the car has been running for a while now. And as stated so many times before the car has been the basis for product development for GTM. Again, I would like to point out that yes I have had my thoughts to sell the car... but who wouldnt after their car has been in several different shops over the course of a year... Am I selling it right now? NO! Some people think me or my partners dont innovate products for the 370z market yet we are bringing to market a fully motorized rear wing, along with new hood designs, Fenders, full bodykits and several other items.

Has the car made a 1000rwhp? YES and a good bit more... do I have to post it up here for a bunch of members who think they are sly, funny and smart... No I dont and honestly I could care less if the 350z community ever gets to see the final posted numbers! You guys have been D!CKS since day one. The car was assembled in the stated time and then changes were made to the entire build. The car has been running for months now and new innovations are being developed because of this build.

If you have negative comments it just shows your immaturity. I wish your little congregation of Me & GTM haters absolutely nothing. You dont deserve it and honestly you guys are pretty full of yourselves. The first step to recovery is recognizing you as a community have a problem!

Good Day!

-So the beast is running at 1000+whp, but OP won't post dyno's..

Enough with the

sinceday1 · 08-11-2011, 08:22 AM

Quote:

Originally Posted by Reality

-So the beast is running at 1000+whp, but OP won't post dyno's..

Enough with the

This isn't B.S. of a kid driving G35 saying he's got VTEK under the hood.. With R&D involved and amount of work to be done + operating as a shop producing other mass produceable products, i figured it would take longer than a year.

If it's possible and happens, good. If not, no harm done.

did YOU have balls to go out there and try what no one else could? then please don't bash...what's the point?

Red__Zed · 08-11-2011, 08:33 AM

Quote:

Originally Posted by sinceday1

This isn't B.S. of a kid driving G35 saying he's got VTEK under the hood.. With R&D involved and amount of work to be done + operating as a shop producing other mass produceable products, i figured it would take longer than a year.

If it's possible and happens, good. If not, no harm done.

did YOU have balls to go out there and try what no one else could? then please don't bash...what's the point?

I don't think we have a problem with it taking longer, it's the claims that they hit 1k and just aren't showing the dynos

Kingbaby · 08-11-2011, 08:45 AM

Quote:

Originally Posted by Rambo

Who are you? Who are any of you?

bullitt5897 · 08-11-2011, 11:45 AM

Wow you guys are acting like a bunch of teenagers behind a keyboard:

You guys collectively get my initial build thread there locked with your ignorance and harassment. Then you make another thread which doesnt get any head way and dies in two pages... then you make another thread to yet again try to bash me over there with ignorant BS posts and a huge circle jerk session of hate on the build... As I told you I will not be posting any results and I will be asking GTM to refrain from posting any details/results of my build on my350z...

Yes the car is running and yes the car has dyno #'s. However, we are developing a whole new intake manifold and we have chosen to hold the release of numbers until we finish development on this intake. You guys from my350z are the most dense idiots I have ever encountered on a forum... Seriously, I tell you I am not going to post results until finished and you b!tch and complain and scream newb and liar... Your community posts and I quote "POST DYNO OR GTFO NEWB." SERIOUSLY?!?!?! You expect someone to release info to your community when your whole mission is to attempt (poorly I might add) to piss someone off and pressure them into giving you fuel for your little hater parade.

Sooo unless you have something to credibly add to the discussion of my build GTFO! You are not welcome here with your little antics and attitude. This community unlike my350z is not full of douche bags and you can quote me on that! Because I know your going to run over there and go look what he said blah blah blah... hate hate hate...

Without any more discussion on this subject the car is running fine and is slated to be at a show later this month and in our shop afterward for new UAM parts and then to SEMA again.

FuszNissan · 08-11-2011, 11:48 AM

Quote:

Originally Posted by Bullitt@UAMotorsports

Wow you guys are acting like a bunch of teenagers behind a keyboard:

You guys collectively get my initial build thread there locked with your ignorance and harassment. Then you make another thread which doesnt get any head way and dies in two pages... then you make another thread to yet again try to bash me over there with ignorant BS posts and a huge circle jerk session of hate on the build... As I told you I will not be posting any results and I will be asking GTM to refrain from posting any details/results of my build on my350z...

Yes the car is running and yes the car has dyno #'s. However, we are developing a whole new intake manifold and we have chosen to hold the release of numbers until we finish development on this intake. You guys from my350z are the most dense idiots I have ever encountered on a forum... Seriously, I tell you I am not going to post results until finished and you b!tch and complain and scream newb and liar... Your community posts and I quote "POST DYNO OR GTFO NEWB." SERIOUSLY?!?!?! You expect someone to release info to your community when your whole mission is to attempt (poorly I might add) to piss someone off and pressure them into giving you fuel for your little hater parade.

Sooo unless you have something to credibly add to the discussion of my build GTFO! You are not welcome here with your little antics and attitude. This community unlike my350z is not full of douche bags and you can quote me on that! Because I know your going to run over there and go look what he said blah blah blah... hate hate hate...

Without any more discussion on this subject the car is running fine and is slated to be at a show later this month and in our shop afterward for new UAM parts and then to SEMA again.

But being serious, that's not even a good computer set up...come on you need a better pic than that.

bullitt5897 · 08-11-2011, 12:00 PM

Quote:

Originally Posted by FuszNissan

But being serious, that's not even a good computer set up...come on you need a better pic than that.

I had to use that one it reminded me of the old 286 computers back in the day! Lmao!!!

Kingbaby · 08-11-2011, 12:43 PM

Glad you got that out of your system!

Why do you keep bringing up my350z?

bullitt5897 · 08-11-2011, 01:00 PM

Quote:

Originally Posted by Kingbaby

Glad you got that out of your system!

Why do you keep bringing up my350z?

Your from my350z you figure it out...

Kingbaby · 08-11-2011, 01:00 PM

Let me rephrase, before I get the "GTFO TROLL" comment

Stop defending yourself! You hit your goal! GREAT!

You hint at coming innovations, with no avail! I guess that's what the community HERE is so anxiously awaiting. Almost like the second coming of christ!

Ron · 08-11-2011, 01:09 PM

I gave up on this some time ago. It's gonna be done when its done. And if it's not, then who cares? At least new parts are supposed to be coming for the community out of this whole thing.

Bullit is the only one who should be b1tching about the time it's taking to complete the build because he has not been able to drive the car in over a year like I am sure he would.

Bullit, if it were me, I would stop providing updates and giving deadlines for when stuff is supposed to be done, it's not your fault things get delayed, but unfortunately, you are loosing credibility because of it. Not bashing, just my 2cents.

bullitt5897 · 08-11-2011, 01:30 PM

Thanks Ron. Development takes time... I'm just tired of the is it done yet questions or the post dyno results newb responses it's ignorant and trifling.

It's one of those lose lose situations for me at the moment... I don't say anything and people's imaginations fly off the handle bars and weired accusations fly around. If I do stand up and say something then people automatically think I am pissed or something when in all reality I am cracking up over the stupidity and lack of life people have by being persistent on trying to piss me off. Like you said there are things out of my hands that have kept me from having the car back... GTM has a very rigorous development process and I have had many talks with Sam over it. They are working hard but are perfectionists when it comes to designing a product... If they can squeeze 10-15 more hp out of it they will take another week to do it...

If anyone is allowed to be upset about the timeline it's me... Not people who have not invested into this project or even this car model...

I appreciate responses like Ron's! Thanks Ron!

Kingbaby · 08-11-2011, 01:34 PM

I said the same thing!

Thanks Rod!

Ron · 08-11-2011, 01:36 PM

Quote:

Originally Posted by Kingbaby

I said the same thing!

Thanks Rod!

Yeah, thank Rod!... wait? Who's Rod?

Kingbaby · 08-11-2011, 01:37 PM

lmoa

<-----Rod

Good Morning everyone hawaii time!

08-11-2011, 11:45 AM	#1550 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Wow you guys are acting like a bunch of teenagers behind a keyboard: You guys collectively get my initial build thread there locked with your ignorance and harassment. Then you make another thread which doesnt get any head way and dies in two pages... then you make another thread to yet again try to bash me over there with ignorant BS posts and a huge circle jerk session of hate on the build... As I told you I will not be posting any results and I will be asking GTM to refrain from posting any details/results of my build on my350z... Yes the car is running and yes the car has dyno #'s. However, we are developing a whole new intake manifold and we have chosen to hold the release of numbers until we finish development on this intake. You guys from my350z are the most dense idiots I have ever encountered on a forum... Seriously, I tell you I am not going to post results until finished and you b!tch and complain and scream newb and liar... Your community posts and I quote "POST DYNO OR GTFO NEWB." SERIOUSLY?!?!?! You expect someone to release info to your community when your whole mission is to attempt (poorly I might add) to piss someone off and pressure them into giving you fuel for your little hater parade. Sooo unless you have something to credibly add to the discussion of my build GTFO! You are not welcome here with your little antics and attitude. This community unlike my350z is not full of douche bags and you can quote me on that! Because I know your going to run over there and go look what he said blah blah blah... hate hate hate... Without any more discussion on this subject the car is running fine and is slated to be at a show later this month and in our shop afterward for new UAM parts and then to SEMA again. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

08-11-2011, 01:30 PM	#1557 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Thanks Ron. Development takes time... I'm just tired of the is it done yet questions or the post dyno results newb responses it's ignorant and trifling. It's one of those lose lose situations for me at the moment... I don't say anything and people's imaginations fly off the handle bars and weired accusations fly around. If I do stand up and say something then people automatically think I am pissed or something when in all reality I am cracking up over the stupidity and lack of life people have by being persistent on trying to piss me off. Like you said there are things out of my hands that have kept me from having the car back... GTM has a very rigorous development process and I have had many talks with Sam over it. They are working hard but are perfectionists when it comes to designing a product... If they can squeeze 10-15 more hp out of it they will take another week to do it... If anyone is allowed to be upset about the timeline it's me... Not people who have not invested into this project or even this car model... I appreciate responses like Ron's! Thanks Ron! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 10:59 AM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM

08-11-2011, 01:09 PM	#1556 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	I gave up on this some time ago. It's gonna be done when its done. And if it's not, then who cares? At least new parts are supposed to be coming for the community out of this whole thing. Bullit is the only one who should be b1tching about the time it's taking to complete the build because he has not been able to drive the car in over a year like I am sure he would. Bullit, if it were me, I would stop providing updates and giving deadlines for when stuff is supposed to be done, it's not your fault things get delayed, but unfortunately, you are loosing credibility because of it. Not bashing, just my 2cents.