GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond

Nixlimited

I noticed that too and found it odd, but didn't bother stoking the fire.

__________________
Car Sold! Pleasure being a part of the Z community.
New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

NYBladeZ

jnaunt has a higher rear gear ratio as mentioned in the other thread, I believe the gears are a great mod but if you add forced induction how will you maintain driveability and get any traction?

__________________
2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold
2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

Red__Zed

The myth of short gears being bad with FI is just that... a myth.

KaienZ34

slicks/cheater slicks

__________________

ZSIZZLE

sick build!!

Ron

^^ haha I was gonna say that... I imagine a robot making calculations when reading Z eliminator posts

RCZ

Man, Z elim just cracks me up... not only is that the 100th time he posts that gibberish, but now it has absolutely nothing to do with the thread or what anyone was talking about.

98intrigue

Man, RCZ cracks me up...

__________________

Z eliminator

Thanks guys.

__________________
12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

shaun66

lol

Jamaica

These guys live to sir the pot.

Reality

It's as simple as "Put-up or Shut-up"
I am sure many are curious as to why he would put that in his sig, when his car hasn't accomplished anything?
I am also sure that if the "WhiteDragon" had hit those #'s, GTM would be posting up on every board that they sponsor.

So lets be real here.. There is no hating going on... Simply searching for the truth, between the hype. And all I am seeing is a bunch of smoke and mirrors.
(funny, seen this all before)

__________________
//2005 35th SB #81 [tyra] SOLD
//2006 GT PPW SOLD

Jamaica

If you really care so much about someone else build why don't you call sam and ask? Instead of bugging why you have this , why this? Get over it . It's done when it done.

bullitt5897

First of all you guys suck at reading time and time again.... I have told you that results will be posted when everything is finished... GTM has been working hard to make this a reproduce able kit and components.... so if I tell you we arent posting results until its COMPLETELY finished it means just that!!!! We are testing different versions of each component! We went threw 4+ lower intake manifolds and the last two weeks has been trying to come out with a symmetrical fuel rail system. 2150cc Injectors are not small and the entire fuel rail has to be assembled on the bench before being installed... that is the only way they will go in and mount up correctly. You guys act like you know everything about this build when you are far from the truth and have very little knowledge on what we have been doing for the past few months! So take a chill pill sit back and enjoy the new products that are being made available to you guys when this is all complete

This car could have been done last year... however, when Sam asked me if I would be willing to allow him to make production parts from my car I said ok... 6 extra months is no problem for me however some of you are all wigged out over this

We have had a delay this week when one of the key team members has gone ill this week and we hope to begin working on the car again on friday.

Mike

__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054

christian370z

Every time I see the word "hater," I ALWAYS think about Epicmealtime.

__________________
-320whp / 259wftlbs-
SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob