GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.

Z eliminator · 06-05-2010, 08:22 PM

why does it take so long i thought it was a 10 hour job.

SAM@GTM · 06-06-2010, 01:17 AM

Quote:

Originally Posted by Z eliminator

why does it take so long i thought it was a 10 hour job.

We are Installing more then just a supercharger kit, we have to deal with a full camp II package with all sensors, both oil and trans cooler install as well. If this was only a supercharger install we would have been done by now . also the car has the tech package witch add a little more time to the install. here is few pics of the latest progress .

Sam

CGMobile370Z · 06-06-2010, 08:40 AM

Really like the location and mounting brackets for the oil cooler and trans cooler. Any chance you will be selling the mounting brackets, if not any chance you could PM the dimensions to me so I could prefab them before my install. Are you guys going to look at installing vents for a pass through in the wheel wells? No worries about water ingestion with removing the blanking plate from the passenger side of the front bumper? Everything really looks great Sam, top notch work. The attention to detail is very impressive.

nixxer · 06-06-2010, 09:18 AM

What on earth is that plastic box looking thing to the left of one of the oil coolers? I see this a lot on G's and I have no idea what it is. And while were on the topic, what does it DO?

CGMobile370Z · 06-06-2010, 10:03 AM

Interactive cruise control laser or sensor.

06-05-2010, 08:22 PM	#1 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	why does it take so long i thought it was a 10 hour job. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

06-06-2010, 08:40 AM	#3 (permalink)
CGMobile370Z Base Member Join Date: Sep 2009 Location: Miami, FL Posts: 144 Drives: 2009 Nissan 370Z Rep Power: 17	Really like the location and mounting brackets for the oil cooler and trans cooler. Any chance you will be selling the mounting brackets, if not any chance you could PM the dimensions to me so I could prefab them before my install. Are you guys going to look at installing vents for a pass through in the wheel wells? No worries about water ingestion with removing the blanking plate from the passenger side of the front bumper? Everything really looks great Sam, top notch work. The attention to detail is very impressive. __________________ 370Z Touring/ Sports Package/ Stillen Gen3 Intake/ Stillen HFC/ NST Underdive Overdrive Pulleys/ FI Cat Back Exhaust/ Custom Headlights Last edited by CGMobile370Z; 06-06-2010 at 08:42 AM.

06-06-2010, 09:18 AM	#4 (permalink)
nixxer Base Member Join Date: Jul 2009 Location: Hawaii Posts: 163 Drives: Black 370z 6MT Sp/T Rep Power: 17	What on earth is that plastic box looking thing to the left of one of the oil coolers? I see this a lot on G's and I have no idea what it is. And while were on the topic, what does it DO? __________________ FI TDX 12" \| FI LTH \| Injen CAI \| UpRev \| Tuned by AMS www.project-definition.com

06-06-2010, 10:03 AM	#5 (permalink)
CGMobile370Z Base Member Join Date: Sep 2009 Location: Miami, FL Posts: 144 Drives: 2009 Nissan 370Z Rep Power: 17	Interactive cruise control laser or sensor. __________________ 370Z Touring/ Sports Package/ Stillen Gen3 Intake/ Stillen HFC/ NST Underdive Overdrive Pulleys/ FI Cat Back Exhaust/ Custom Headlights

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM
S & R PERFORMANCE Tampa, Florida OPEN HOUSE!!!!!	shezzzhot	South East Region	7	01-09-2010 02:55 AM
Forged Performance Dyno Day/Open House	XenChi	South East Region	7	04-24-2009 07:54 AM