STILLEN 370Z Supercharger System - Announcement!!!

xyz · 11-04-2010, 01:44 PM

Quote:

Originally Posted by spearfish25

That should read 12.8 @ 113. 133mph would be insanely fast.

Lol, yea . . . sorry for the typo . . . fixed! Thanks.

ImportConvert · 11-08-2010, 11:23 AM

Quote:

Originally Posted by m4a1mustang

Just read the Road & Track blurb on Stillen's test mule and they cited the large amount of negative camber in the rear as a factor that hurt off-the-line grip.

So? It got 0-60 a good bit quicker and only managed to drop a touch in the 1/4 and had a very weak trap-speed. No amount of "traction limitation" is going to account for this showing.

Nitex · 11-09-2010, 04:08 PM

^^ Am i missing something here? Do you have the Stillen SC kit, and your saying you ran a faster 0-60 but slower 1/4 and trap? Weird... Can someone confirm this?

Phimosis · 11-09-2010, 06:30 PM

Quote:

Originally Posted by Nitex

^^ Am i missing something here? Do you have the Stillen SC kit, and your saying you ran a faster 0-60 but slower 1/4 and trap? Weird... Can someone confirm this?

It trapped 113. I'm guessing that was in SoCal and in the summer. 113 is pretty good. Last summer with bolt-ons, but pre-supercharger, my highest trap was 104 mph. It's also 1/2 second quicker in the quarter mile than what all the car magazines were able to get.

The flip side though, is that in 2004 motortrend tested the z51 c6 corvette and it ran a 12.7 @ 112 with 400 engine hp. That's 115 hp less than what Stillen is claiming from their press car.

ImportConvert · 11-09-2010, 11:37 PM

Quote:

Originally Posted by Phimosis

It trapped 113. I'm guessing that was in SoCal and in the summer. 113 is pretty good. Last summer with bolt-ons, but pre-supercharger, my highest trap was 104 mph. It's also 1/2 second quicker in the quarter mile than what all the car magazines were able to get.

The flip side though, is that in 2004 motortrend tested the z51 c6 corvette and it ran a 12.7 @ 112 with 400 engine hp. That's 115 hp less than what Stillen is claiming from their press car.

Exactly. The 'vette weighs about the same as a Z, and ran about the same time as the "supposed" 515bhp Z. That Z does NOT! make 515bhp unless the driveline is sucking up 150hp. Sorry. Not happening with those numbers unless they slammed the brakes on at the 1000' mark.

Lug · 11-10-2010, 03:32 PM

People are comparing results from different magazines. I've seen MT get a 4.6 on the 370Z vs. 4.9 from C&D vs. 5.1 from Edmunds & others. That's a 1/2 second swing on the exact same car. This is all before you account for different cars with different traction, etc. You just can't cross-compare like that with any reasonable accuracy.

spearfish25 · 11-10-2010, 03:43 PM

Pretty sure the 4.6 was right

Zsteve · 11-10-2010, 04:00 PM

any stock Z on the street will be hard pressed to get the 4.6 thats claimed. More like 5. That 4.6 was on a well prepped track Im sure. Most cars have a hard time hitting the quoted mark.

Z eliminator · 11-10-2010, 04:34 PM

I have no problems running 12.8009. with my 7 AT with bolt on's and its on the stock 19 inch street tires's

Nitex · 11-10-2010, 04:41 PM

^ so we have NA Z's running within a tenth of the SC'd ones... Somethings off.... either the drivers in the SC'd Z are full of fail. Or we just do not have an accurate representation of a SC'd 370 1/4 mile.

LateralG'z · 11-10-2010, 05:05 PM

Once I upgrade my CSC and clutch I will 1/4 mile mine and post the results

christian370z · 11-10-2010, 05:12 PM

Since one of the strengths to the Stillen kit is the room for upgrading by being able to make more boost than the initial kit setup and therefore power with the Vortech unit, how much more power could it efficiently make?

LateralG'z · 11-10-2010, 05:20 PM

Quote:

Originally Posted by christian370z

Since one of the strengths to the Stillen kit is the room for upgrading by being able to make more boost than the initial kit setup and therefore power with the Vortech unit, how much more power could it efficiently make?

The V3 stillen spec'd is rated for max of 22 psi. Not sure what that equates too

christian370z · 11-10-2010, 05:33 PM

Oh wow, so it is safe to say it can probably push enough power to run into the danger zone on a stock VQ37 then. Thanks Lateral!

Lug · 11-10-2010, 05:40 PM

Quote:

Originally Posted by christian370z

Oh wow, so it is safe to say it can probably push enough power to run into the danger zone on a stock VQ37 then. Thanks Lateral!

Probably enough to push two pistons out the hood, 2 out the side of the engine housing, and two through the oil pan.

11-09-2010, 04:08 PM	#2223 (permalink)
Nitex Track Member Join Date: Jan 2010 Location: Seattle Posts: 848 Drives: '13 GTI Stage 2 UNI Rep Power: 17	^^ Am i missing something here? Do you have the Stillen SC kit, and your saying you ran a faster 0-60 but slower 1/4 and trap? Weird... Can someone confirm this? __________________ 2013 Drivers ED GTI \| Stage 2 Unitronic

11-10-2010, 03:32 PM	#2226 (permalink)
Lug A True Z Fanatic Join Date: Dec 2008 Location: Texas Posts: 1,926 Drives: 2006 350Z Rep Power: 20	People are comparing results from different magazines. I've seen MT get a 4.6 on the 370Z vs. 4.9 from C&D vs. 5.1 from Edmunds & others. That's a 1/2 second swing on the exact same car. This is all before you account for different cars with different traction, etc. You just can't cross-compare like that with any reasonable accuracy. __________________ keep Chubbs in your pocket - Chubbs Last edited by Lug; 11-10-2010 at 03:35 PM.

11-10-2010, 03:43 PM	#2227 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1857	Pretty sure the 4.6 was right __________________ 2013 Cadillac V-Wagon, RIP Z

11-10-2010, 04:00 PM	#2228 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	any stock Z on the street will be hard pressed to get the 4.6 thats claimed. More like 5. That 4.6 was on a well prepped track Im sure. Most cars have a hard time hitting the quoted mark. __________________ 2010 LS3 C6 Silver coupe corvette

11-10-2010, 04:34 PM	#2229 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	I have no problems running 12.8009. with my 7 AT with bolt on's and its on the stock 19 inch street tires's __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

11-10-2010, 04:41 PM	#2230 (permalink)
Nitex Track Member Join Date: Jan 2010 Location: Seattle Posts: 848 Drives: '13 GTI Stage 2 UNI Rep Power: 17	^ so we have NA Z's running within a tenth of the SC'd ones... Somethings off.... either the drivers in the SC'd Z are full of fail. Or we just do not have an accurate representation of a SC'd 370 1/4 mile. __________________ 2013 Drivers ED GTI \| Stage 2 Unitronic

11-10-2010, 05:05 PM	#2231 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 17	Once I upgrade my CSC and clutch I will 1/4 mile mine and post the results __________________ 2010 Mag Black, 6MT,

11-10-2010, 05:12 PM	#2232 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	Since one of the strengths to the Stillen kit is the room for upgrading by being able to make more boost than the initial kit setup and therefore power with the Vortech unit, how much more power could it efficiently make? __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

11-10-2010, 05:33 PM	#2234 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	Oh wow, so it is safe to say it can probably push enough power to run into the danger zone on a stock VQ37 then. Thanks Lateral! __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 10:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 05:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-22-2010 11:05 PM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 12:09 AM