STILLEN 370Z Supercharger System - Announcement!!!

Originally Posted by stormcrow

Wow, man. Either Nissan fed you some misinformation or your engineers misunderstood what they were told. Nissan uses a 'hot wire' type mass air-flow sensor which most certainly does measure the density of the air. It does so by denser air causing a temperature drop or pressure drop. This, in turn, requires more voltage from the hot wire to equalize the intake temperature with the temperature of the hot wire itself. Nissan is not using a 'vane meter sensor' which would measure only air flow instead of air density and flow.

The reason Nissan uses 'draw through' on the OEM turbo cars is for longevity of the MAF. That and because a MAF in laminar air flow is much easier to tune. Granted, 'blow through' designs will certainly diminish the life of the MAF, but not drastically.

BTW, if anyone decided to adapt a BOV to your kit, the tune would fall on its face and the car would probably not even idle. "Draw through" MAF setups do not allow for anything but recirculation. You are not a tuner, so I will let you have a pass on that one. But, I certainly wouldn't recommend it to your clients.