STILLEN 370Z Supercharger System - Announcement!!!

bigcloud · 03-17-2010, 12:59 PM

Quote:

Originally Posted by stormcrow

Wow, man. Either Nissan fed you some misinformation or your engineers misunderstood what they were told. Nissan uses a 'hot wire' type mass air-flow sensor which most certainly does measure the density of the air. It does so by denser air causing a temperature drop or pressure drop. This, in turn, requires more voltage from the hot wire to equalize the intake temperature with the temperature of the hot wire itself. Nissan is not using a 'vane meter sensor' which would measure only air flow instead of air density and flow.

The reason Nissan uses 'draw through' on the OEM turbo cars is for longevity of the MAF. That and because a MAF in laminar air flow is much easier to tune. Granted, 'blow through' designs will certainly diminish the life of the MAF, but not drastically.

BTW, if anyone decided to adapt a BOV to your kit, the tune would fall on its face and the car would probably not even idle. "Draw through" MAF setups do not allow for anything but recirculation. You are not a tuner, so I will let you have a pass on that one. But, I certainly wouldn't recommend it to your clients.

I don't post on here much, but this is starting to get annoying.

So are you a Nissan engineer? Have you signed a non disclosure agreement with Nissan? Stillen engineers collaborated with NISSAN engineers what don't you understand about that? If they have information you don't have to make a decision on the design of a product then why are you questioning the design? I mean did you have ANY hand in the development of the kit? If so then you may have a leg to stand on, but if you don't have any proprietary information from NISSAN then why are you giving them a hard time? Are you an engineer for some other company and you're looking for proprietary information through backdoor means? Something doesn't seem right here...

stormcrow · 03-17-2010, 01:03 PM

Quote:

Originally Posted by bigcloud

I don't post on here much, but this is starting to get annoying.

So are you a Nissan engineer? Have you signed a non disclosure agreement with Nissan? Stillen engineers collaborated with NISSAN engineers what don't you understand about that? If they have information you don't have to make a decision on the design of a product then why are you questioning the design? I mean did you have ANY hand in the development of the kit? If so then you may have a leg to stand on, but if you don't have any proprietary information from NISSAN then why are you giving them a hard time? Are you an engineer for some other company and you're looking for proprietary information through backdoor means? Something doesn't seem right here...

Seriously? Paranoid much? The simple fact is that Nissan uses a 'hot wire' mass air-flow sensor and there is no secret or "inside information" on how 'hot wire' mass air-flow sensors work.

bigcloud · 03-17-2010, 01:19 PM

Quote:

Originally Posted by stormcrow

Seriously? Paranoid much? The simple fact is that Nissan uses a 'hot wire' mass air-flow sensor and there is no secret or "inside information" on how 'hot wire' mass air-flow sensors work.

I honestly do not even know why I responded to your post. Simply, it was retarded.

Not paranoid, but annoyed at the fact that you're trying to discredit the design or find some flaw in it. I am an engineer and can see what you're trying to do. Granted you do sound very educated on this subject, but what are you trying to accomplish? Other people that do not have your knowledge will not fully understand what is going on. Are you trying to contribute to the community? In what way? What are your intentions?

stormcrow · 03-17-2010, 01:35 PM

Quote:

Originally Posted by bigcloud

Not paranoid, but annoyed at the fact that you're trying to discredit the design or find some flaw in it. I am an engineer and can see what you're trying to do. Granted you do sound very educated on this subject, but what are you trying to accomplish? Other people that do not have your knowledge will not fully understand what is going on. Are you trying to contribute to the community? In what way? What are your intentions?

It's not about discrediting the design or finding flaw. It's about addressing what are obvious (to me) fundamental design issues. These issues can lead to problems for the buyers. If Stillen can give solid technical reasoning as to why they are going against MAF tuning 101, then I will be satiated and happy to have learned something in the process. I am not a tuner, nor do I purport to be. But, I am educated as I have been spending my hard-earned money on modifying cars for years. Granted, others may not quite understand what I am asking, but if there is a technical issue with the safety/longevity of the kit, then most will walk away understanding this if Stillen cannot readily explain it away.

Again, as I have said in multiple posts, I am trying to help the community by making sure that vendors are honest about the wares they are hawking. If this kit is measuring air temperatures pre-compressor of 60 degrees F and the temp being blown into the intake is post-compressor and 200 degrees F (just an exaggerated example), the ECU is receiving the 60 degree temps and compensating for this instead of 200. Can't you see the issue and the danger? Wouldn't you want to know this about a kit you were going to spend 6k on and put on a 40k car?

And, once more, just for clarification. If Stillen can answer these questions with solid technical answers that are legitimate in nature, I will certainly understand and be happy to have furthered my knowledge.

bigcloud · 03-17-2010, 03:20 PM

Quote:

Originally Posted by stormcrow

It's not about discrediting the design or finding flaw. It's about addressing what are obvious (to me) fundamental design issues. These issues can lead to problems for the buyers. If Stillen can give solid technical reasoning as to why they are going against MAF tuning 101, then I will be satiated and happy to have learned something in the process. I am not a tuner, nor do I purport to be. But, I am educated as I have been spending my hard-earned money on modifying cars for years. Granted, others may not quite understand what I am asking, but if there is a technical issue with the safety/longevity of the kit, then most will walk away understanding this if Stillen cannot readily explain it away.

Again, as I have said in multiple posts, I am trying to help the community by making sure that vendors are honest about the wares they are hawking. If this kit is measuring air temperatures pre-compressor of 60 degrees F and the temp being blown into the intake is post-compressor and 200 degrees F (just an exaggerated example), the ECU is receiving the 60 degree temps and compensating for this instead of 200. Can't you see the issue and the danger? Wouldn't you want to know this about a kit you were going to spend 6k on and put on a 40k car?

And, once more, just for clarification. If Stillen can answer these questions with solid technical answers that are legitimate in nature, I will certainly understand and be happy to have furthered my knowledge.

I can respect your opinion then. Thanks.

Zultimate · 03-17-2010, 05:23 PM

I haven't read through this entire thread but wondering what the cost is on this Supercharger upgrade. If anyone has a ballpark total figure, including clutch upgrade and whatever else is necessary that would be cool. Just trying to get a wish list together.

m4a1mustang · 03-17-2010, 06:06 PM

Quote:

Originally Posted by Zultimate

I haven't read through this entire thread but wondering what the cost is on this Supercharger upgrade. If anyone has a ballpark total figure, including clutch upgrade and whatever else is necessary that would be cool. Just trying to get a wish list together.

Well, $5800 intro pricing for the SC kit. Add at least $1000 labor if you pay someone to install for you.

Clutch/Flywheel installed is probably around $1000-1200.

DannyGT · 03-17-2010, 01:04 PM

Quote:

Originally Posted by bigcloud

I don't post on here much, but this is starting to get annoying.

So are you a Nissan engineer? Have you signed a non disclosure agreement with Nissan? Stillen engineers collaborated with NISSAN engineers what don't you understand about that? If they have information you don't have to make a decision on the design of a product then why are you questioning the design? I mean did you have ANY hand in the development of the kit? If so then you may have a leg to stand on, but if you don't have any proprietary information from NISSAN then why are you giving them a hard time? Are you an engineer for some other company and you're looking for proprietary information through backdoor means? Something doesn't seem right here...

I dont think any of the information he's talking about is some sort of secret. He does sound knowledgable, I just dont know if its all accurate when referring to the 370Z. Either way - they are informative questions and I would like them answered because I didnt really know how the MAFs in our cars worked. Not a big deal...

EDIT: Thanks for answering that so fast Stillen! LOL

bigcloud · 03-17-2010, 01:21 PM

Quote:

Originally Posted by DannyGT

I dont think any of the information he's talking about is some sort of secret. He does sound knowledgable, I just dont know if its all accurate when referring to the 370Z. Either way - they are informative questions and I would like them answered because I didnt really know how the MAFs in our cars worked. Not a big deal...

EDIT: Thanks for answering that so fast Stillen! LOL

You may be right DannyGT, but if you read into his questions from a systems engineering point of view you will see where he is coming from.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 10:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 05:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-22-2010 11:05 PM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 12:09 AM

03-17-2010, 05:23 PM	#6 (permalink)
Zultimate Base Member Join Date: Mar 2010 Location: O'fallon IL Posts: 27 Drives: 09 370Z Rep Power: 17	I haven't read through this entire thread but wondering what the cost is on this Supercharger upgrade. If anyone has a ballpark total figure, including clutch upgrade and whatever else is necessary that would be cool. Just trying to get a wish list together.