STILLEN 370Z Supercharger System - Announcement!!!

Kyle@STILLEN · 03-12-2010, 12:51 PM

Please ignore those six silver wires (three on each side) that you see in the photos. We've been trying to work around R&D without slowing them down any and those wires are for their datalogging. They actually drilled into each exhaust port on the manifolds and inserted EGT probes so they could monitor exhaust gas temperatures of each cylinder. That way they know that each cylinder is working efficiently and safely. If one cylinder is a little hot they know that, that particular cylinder might be running a bit lean so they can adjust that injector accordingly. This way we're not just relying on the O2 sensor at the back of the manifold by the collector, we know exactly what each cylinder is doing individually.

Also, just so you guys know, the silicone couplers will be black in production. Those blue ones were simply for prototyping but we're expecting the black production pieces to arrive any day now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 10:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 05:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-22-2010 11:05 PM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 12:09 AM

03-12-2010, 12:51 PM	#6 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 307	Please ignore those six silver wires (three on each side) that you see in the photos. We've been trying to work around R&D without slowing them down any and those wires are for their datalogging. They actually drilled into each exhaust port on the manifolds and inserted EGT probes so they could monitor exhaust gas temperatures of each cylinder. That way they know that each cylinder is working efficiently and safely. If one cylinder is a little hot they know that, that particular cylinder might be running a bit lean so they can adjust that injector accordingly. This way we're not just relying on the O2 sensor at the back of the manifold by the collector, we know exactly what each cylinder is doing individually. Also, just so you guys know, the silicone couplers will be black in production. Those blue ones were simply for prototyping but we're expecting the black production pieces to arrive any day now.