STILLEN 370Z Supercharger System - Announcement!!!

Originally Posted by EVOHUNTER

I've had nothing but problems with my stillen kit, the kit heat soaks so fast youll have 460 whp when u start it up, drive for a few mins in 80 degree + weather and the kit only puts out 370whp. Im fed up with the kit aswell as the car.
The overall design is weak, intake tubes, MAF postion.. The cooling system is a JOKE.
I was thinking about upgrading the cooling, new res. new piping, new intercooler.
upgrade the pulley and impeller, and MAF sensors. But why? this stuff should of been done in the R&D .
Im taking the kit out next week and replacing with a single turbo set up.
And ill never look back at stillen, for ANYTHING.
Poor design.
Thought id add, not to talk down on anyone that has stillen kit, If its working for you.. all the power to you.

Originally Posted by Rusty

Dumb question. How are you planning to up grade the intercooler?

Originally Posted by ANMVQ

Well , We'll see when I'm done with my car, See sig for current numbers,

I upgraded EVERYTHING,
34 Tooth Count Jackshaft Pulley
30 Tooth/35mm Supercharger Pulley
idler assembly from a 03-05 350z
Bosh EV14 Injectors 850CC
UPREV MAF's
NGK plugs( GTR Plugs)
Heat Exchanger (Frozen Boost) 27"x6"x3.5".

I agree about the heat soak tho the way the kit is now.

Originally Posted by WILD370Z

I tried to find the heat exchanger on frozen boost not sure if it will fit because I already have an auto cooler and a 34 core oil cooler. Please let me know how you find the new heat exchanger very keen to find out the results