GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

SAM@GTM · 03-01-2010, 05:58 AM

We are please to announce the GTM supercharger system for the 370Z. Our GTM supercharger system will be utilizing the Rotrex C38 supercharger, The Key to the Rotrex supercharger is unique compactness, efficiency, low noise and reliability and its state of the art traction drive technology.

Great speeds and low noise are just some of the advantages of traction drives over traditional gear transmissions. Traction drives transmit power through friction forces between its rolling elements.

The Rotrex traction drive uses an elastic annulus with a small pre-span to secure contact between the roller planets and the sun shaft with a reasonable force. The patented "ramp effect" increases efficiency and reliability in the transmission by regulating the torque transfer capability on demand through self-adjusting planet geometry.

To enhance performance, the Rotrex traction drive uses a special traction fluid. These fluids are a new family of synthetic hydrocarbon oils and greases offering a series of unique performance advantages. Developed specially for its use in Rotrex superchargers, the SX100 momentarily increases viscosity under high surface pressure, enhancing the traction drive performance by securing the optimum friction between rolling elements while cooling and protecting the system.

This traction drive combined with the latest technology in centrifugal compression, characterized by high adiabatic efficiency and low noise, gives Rotrex superchargers an exceptional competitive edge over any other forced induction solution.

The GTM Supercharger kit will Have four different Rotrex compressors to chose from: C38-61 Trim,C38-71 trim, C38-81 trim,C38-91. Combined with our custom compressor housing we will offer three different stages .

Stage zero up to 450 HP (carb approval pending)
Stage one up to 500 HP
Stage two up to 525 HP
Stage three up to 550 HP

All of our Supercharger kits are available in two forms. The tuner kit form, so the professional and the end user have the flexibility of choosing what ever fuel and engine management they may desire and feel comfortable using. The second option being a complete kit including fuel and engine management solutions. With that being said, GTM will also offer an extensive range of fuel system and engine management modules to go with our Supercharger kits.

Below is a description of all the components of the kit :

-Rotrex C38 supercharger
-GTM compressor housing
-GTM Supercharger Billet aluminum brackets
-GTM billet aluminum Sc pulley
-GTM supercharger cooler kit
-Rotrex Supercharger Traction fluid
-4-Ply High Resistance Nomex Silicon couplers
-Stainless Steel T-Bolt clamps
-2.5 x 10 x 24 Bar and Plate Core Intercooler Rated @ 700hp
-Polished aluminum IC Piping
-GTM oil Filter Relocation Kit
-Cold Air Intake System (using k&n filters)
-Bosch Bypass valve
-Pre-made steel braided oil and P.S Supply & Return lines
-All Necessary Hardware and Installation Instructions
-GTM Custom mapped plug-in And play engine management for optimum engine tune and power .
-GTM Basic fuel system with Denso 600cc Injectors and - Walbro 255 Fuel Pump .
-GTM Custom Drive belt By Bando
-GTM Heavy duty Belt idlers

Some Key points about the GTM supercharger kit

After literally installing and tuning every supercharger kit available for the VQ platform and seeing their short comings, we got the inspiration to develop a kit superior to all others. Problems with the other kits that we wanted to address with our own include: not supplying a descent amount of power, belt breakage and slippage, obnoxious gear lash noises, limited power expansion and lack of the OEM look. Some of the key things we did to achieve our goal are:

SUPERCHARGER NOISE : We chose the Rotrex unit, a very QUIET supercharger compared to anything else on the market .

SUPERCHARGER BRACKETS : Our supercharger bracket is 3 dimensional made out of of thick billet aluminum to prevent any flexing, we also mounted the supercharger unit as close as possible to the engine to limit the amount of flex possible, as well as keep the belt length down between pulleys.

BELT AND TENSIONER DESIGN : We have over 80% belt wrap on our supercharger's pulley and with utilizing the factory automatic belt tensioner over or under tightening is simply not possible.

POWER EXPANSION : Changing the pulley on the super charger is less then 20 mints job

AESTHETICS : The GTM Supercharger kit maintain the clean oem look

ENGINE MANAGEMENT: With using the GTM flash we are to able to maintain the OEM drive ability so the car will run like stock, only with a lot more power .

POWER DELIVERY : The GTM supercharger is best bang for the Buck out of the box

Here is the pics of the GTM SUPERCHARGER KIT and some of its major components

Here is the pics of the GTM SUPERCHARGER KIT install process

HERE IS THE POWER OUTPUT OF STAGE 1 SUPERCHARGER KIT

VIDEO'S OF THE KIT IN ACTION

PRICING

We are currently excepting pre-orders for a introductory Price of 4995.00 and for a limited time only .

Sam

SAM@GTM · 03-01-2010, 05:58 AM

Reserved to go in more details in the engine management .

Sam

SAM@GTM · 03-01-2010, 06:01 AM

***Update 1/4/12***

We have the CARB Test Letter in hand! This means that CARB has approved the components in the kit and they have everything they need with the exception of final emissions testing. We are *this* close to getting approval.

Sam

Buddy Revell · 03-01-2010, 06:06 AM

Simply awesome, Sam! Incredible job!

SAM@GTM · 03-01-2010, 06:11 AM

Quote:

Originally Posted by Buddy Revell

Simply awesome, Sam! Incredible job!

so ******* tired, i'm glad it is done .

Sam

Buddy Revell · 03-01-2010, 06:14 AM

PM sent.

shumby · 03-01-2010, 06:15 AM

ok now I really want that proposal from you

huff442 · 03-01-2010, 06:16 AM

Incredible piece of work! That's just a work of art. Sam, what will the price difference be between the Stage 1, 2, and 3? I'm interested in the Stage 3 system, including full exhaust. Do you recommend your 2.5" or 3" exhaust? Will this setup work with long tube headers? Yes, lots of questions.

shumby · 03-01-2010, 06:16 AM

So I am in at the pre order price right? Even thought i will ont be getting ti installed by you until may/june? Do you need a deposit?

shumby · 03-01-2010, 06:17 AM

plus one on the LTH as I have them ordered.

LiquidZ · 03-01-2010, 06:46 AM

hmm, I must have missed when Stage 3 turned from the 81 trim to the 91 trim.

Sam, take a nap

m4a1mustang · 03-01-2010, 06:49 AM

So does the intro pricing apply to all trims?

LiquidZ · 03-01-2010, 06:53 AM

Quote:

Originally Posted by m4a1mustang

So does the intro pricing apply to all trims?

Good question.

Also, I noticed that the C38-91 won't be out until late spring/early summer of 2010. Any comment?

Quote:

Higher flow capacity for the C38 range
Rotrex is in the process of expanding upwards our C38 range, and we will target both increased flow capacity and a further increased efficiency level. With the future C38-91 we aim to deliver at least 10% more boost than currently available with the C38-81. Expected availability late spring/early summer 2010.

From Rotrex A/S

m4a1mustang · 03-01-2010, 06:56 AM

FWIW, I'm interested in the Stage Zero turn-key kit. $4995 for ~420whp is a great deal, IMO. Interested on when the kit would actually be available and what kind of pricing I'd expect if I ordered after the introductory offer period.

LiquidZ · 03-01-2010, 06:57 AM

Quote:

Originally Posted by m4a1mustang

FWIW, I'm interested in the Stage Zero turn-key kit. $4995 for ~420whp is a great deal, IMO. Interested on when the kit would actually be available and what kind of pricing I'd expect if I ordered after the introductory offer period.

... another good question. I won't be ready to go FI for some time.

03-01-2010, 05:58 AM	#1 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 17	GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE We are please to announce the GTM supercharger system for the 370Z. Our GTM supercharger system will be utilizing the Rotrex C38 supercharger, The Key to the Rotrex supercharger is unique compactness, efficiency, low noise and reliability and its state of the art traction drive technology. Great speeds and low noise are just some of the advantages of traction drives over traditional gear transmissions. Traction drives transmit power through friction forces between its rolling elements. The Rotrex traction drive uses an elastic annulus with a small pre-span to secure contact between the roller planets and the sun shaft with a reasonable force. The patented "ramp effect" increases efficiency and reliability in the transmission by regulating the torque transfer capability on demand through self-adjusting planet geometry. To enhance performance, the Rotrex traction drive uses a special traction fluid. These fluids are a new family of synthetic hydrocarbon oils and greases offering a series of unique performance advantages. Developed specially for its use in Rotrex superchargers, the SX100 momentarily increases viscosity under high surface pressure, enhancing the traction drive performance by securing the optimum friction between rolling elements while cooling and protecting the system. This traction drive combined with the latest technology in centrifugal compression, characterized by high adiabatic efficiency and low noise, gives Rotrex superchargers an exceptional competitive edge over any other forced induction solution. The GTM Supercharger kit will Have four different Rotrex compressors to chose from: C38-61 Trim,C38-71 trim, C38-81 trim,C38-91. Combined with our custom compressor housing we will offer three different stages . Stage zero up to 450 HP (carb approval pending) Stage one up to 500 HP Stage two up to 525 HP Stage three up to 550 HP All of our Supercharger kits are available in two forms. The tuner kit form, so the professional and the end user have the flexibility of choosing what ever fuel and engine management they may desire and feel comfortable using. The second option being a complete kit including fuel and engine management solutions. With that being said, GTM will also offer an extensive range of fuel system and engine management modules to go with our Supercharger kits. Below is a description of all the components of the kit : -Rotrex C38 supercharger -GTM compressor housing -GTM Supercharger Billet aluminum brackets -GTM billet aluminum Sc pulley -GTM supercharger cooler kit -Rotrex Supercharger Traction fluid -4-Ply High Resistance Nomex Silicon couplers -Stainless Steel T-Bolt clamps -2.5 x 10 x 24 Bar and Plate Core Intercooler Rated @ 700hp -Polished aluminum IC Piping -GTM oil Filter Relocation Kit -Cold Air Intake System (using k&n filters) -Bosch Bypass valve -Pre-made steel braided oil and P.S Supply & Return lines -All Necessary Hardware and Installation Instructions -GTM Custom mapped plug-in And play engine management for optimum engine tune and power . -GTM Basic fuel system with Denso 600cc Injectors and - Walbro 255 Fuel Pump . -GTM Custom Drive belt By Bando -GTM Heavy duty Belt idlers Some Key points about the GTM supercharger kit After literally installing and tuning every supercharger kit available for the VQ platform and seeing their short comings, we got the inspiration to develop a kit superior to all others. Problems with the other kits that we wanted to address with our own include: not supplying a descent amount of power, belt breakage and slippage, obnoxious gear lash noises, limited power expansion and lack of the OEM look. Some of the key things we did to achieve our goal are: SUPERCHARGER NOISE : We chose the Rotrex unit, a very QUIET supercharger compared to anything else on the market . SUPERCHARGER BRACKETS : Our supercharger bracket is 3 dimensional made out of of thick billet aluminum to prevent any flexing, we also mounted the supercharger unit as close as possible to the engine to limit the amount of flex possible, as well as keep the belt length down between pulleys. BELT AND TENSIONER DESIGN : We have over 80% belt wrap on our supercharger's pulley and with utilizing the factory automatic belt tensioner over or under tightening is simply not possible. POWER EXPANSION : Changing the pulley on the super charger is less then 20 mints job AESTHETICS : The GTM Supercharger kit maintain the clean oem look ENGINE MANAGEMENT: With using the GTM flash we are to able to maintain the OEM drive ability so the car will run like stock, only with a lot more power . POWER DELIVERY : The GTM supercharger is best bang for the Buck out of the box Here is the pics of the GTM SUPERCHARGER KIT and some of its major components Here is the pics of the GTM SUPERCHARGER KIT install process HERE IS THE POWER OUTPUT OF STAGE 1 SUPERCHARGER KIT VIDEO'S OF THE KIT IN ACTION PRICING We are currently excepting pre-orders for a introductory Price of 4995.00 and for a limited time only . Sam Last edited by SAM@GTM; 05-15-2010 at 01:21 PM.

03-01-2010, 05:58 AM	#2 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 17	Reserved to go in more details in the engine management . Sam Last edited by SAM@GTM; 03-01-2010 at 06:42 AM.

03-01-2010, 06:01 AM	#3 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 17	*Update 1/4/12* We have the CARB Test Letter in hand! This means that CARB has approved the components in the kit and they have everything they need with the exception of final emissions testing. We are this close to getting approval. Sam Last edited by SAM@GTM; 01-04-2012 at 05:34 PM. Reason: CARB Test Letter Update

03-01-2010, 06:15 AM	#7 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 236	ok now I really want that proposal from you __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

03-01-2010, 06:16 AM	#9 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 236	So I am in at the pre order price right? Even thought i will ont be getting ti installed by you until may/june? Do you need a deposit? __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

03-01-2010, 06:06 AM	#4 (permalink)
Buddy Revell Enthusiast Member Join Date: Mar 2009 Location: So Cal Posts: 303 Drives: 08 Infiniti G37 Rep Power: 16	Simply awesome, Sam! Incredible job!

03-01-2010, 06:14 AM	#6 (permalink)
Buddy Revell Enthusiast Member Join Date: Mar 2009 Location: So Cal Posts: 303 Drives: 08 Infiniti G37 Rep Power: 16	PM sent.

03-01-2010, 06:16 AM	#8 (permalink)
huff442 Enthusiast Member Join Date: May 2009 Location: NW Arkansas Age: 53 Posts: 309 Drives: 09 370Z 6mt Tour/Spt Rep Power: 15	Incredible piece of work! That's just a work of art. Sam, what will the price difference be between the Stage 1, 2, and 3? I'm interested in the Stage 3 system, including full exhaust. Do you recommend your 2.5" or 3" exhaust? Will this setup work with long tube headers? Yes, lots of questions.

03-01-2010, 06:17 AM	#10 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 236	plus one on the LTH as I have them ordered. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

03-01-2010, 06:46 AM	#11 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 704	hmm, I must have missed when Stage 3 turned from the 81 trim to the 91 trim. Sam, take a nap __________________

03-01-2010, 06:49 AM	#12 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	So does the intro pricing apply to all trims? __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-01-2010, 06:56 AM	#14 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	FWIW, I'm interested in the Stage Zero turn-key kit. $4995 for ~420whp is a great deal, IMO. Interested on when the kit would actually be available and what kind of pricing I'd expect if I ordered after the introductory offer period. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 12:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 12:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 11:55 PM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 02:32 PM