* SOHO Motorsports VHR Intake Manifold Group Buy *

Spooler · 01-13-2021, 10:48 PM

2 more to go and one to find out what the shipping to Canada will be.

Nik@SOHO · 01-15-2021, 02:38 PM

Quote:

Originally Posted by Spooler

2 more to go and one to find out what the shipping to Canada will be.

Where in Canada?

Hotrodz · 01-14-2021, 08:23 AM

Yep, add me to the mix! Let's do this!!!

Spooler · 01-14-2021, 09:02 AM

Still waiting on JCHammond and GeauxTigers1 to respond.

jchammond · 01-14-2021, 06:15 PM

Put me on the list behind Hotrodz

GeauxTigers1 · 01-16-2021, 02:02 AM

#8 please!!

GeauxTigers1 · 01-16-2021, 02:03 AM

Do we have any idea if we can port these and possibly get some power gain?

Spooler · 01-16-2021, 11:45 AM

Quote:

Originally Posted by GeauxTigers1

Do we have any idea if we can port these and possibly get some power gain?

Maybe, the stock intake is really good. We won't loose anything with this intake, that is for sure. AAM was a 50hp loss. I remember hearing that somewhere. May have been from you. LOL

Spooler · 01-16-2021, 01:29 PM

I am out of folks I know. Some of you guys may want to reach out to your boosted friends. We have 2 more slots to fill.

OMGWTFBBQ · 01-16-2021, 03:24 PM

Probably a little too late for this since the production piece is already made, but thoughts about making the inlet of the intake manifold where it meets to the throttle body larger to fit a 75mm 2009-2014 Nissan Maxima throttle body so boosted guys can have a 75mm (3 inch) going all the way from the intercooler through the intake pipe through the Maxima throttle body all the way into the intake manifold?

Maybe I'm just talking nonsense.

Elmo370z · 01-16-2021, 04:37 PM

Quote:

Originally Posted by OMGWTFBBQ

Probably a little too late for this since the production piece is already made, but thoughts about making the inlet of the intake manifold where it meets to the throttle body larger to fit a 75mm 2009-2014 Nissan Maxima throttle body so boosted guys can have a 75mm (3 inch) going all the way from the intercooler through the intake pipe through the Maxima throttle body all the way into the intake manifold?

Maybe I'm just talking nonsense.

It would a pointless mod. You won’t gain anything from it.

Whjaxn17 · 01-18-2021, 10:28 AM

Quote:

Originally Posted by OMGWTFBBQ

Probably a little too late for this since the production piece is already made, but thoughts about making the inlet of the intake manifold where it meets to the throttle body larger to fit a 75mm 2009-2014 Nissan Maxima throttle body so boosted guys can have a 75mm (3 inch) going all the way from the intercooler through the intake pipe through the Maxima throttle body all the way into the intake manifold?

Maybe I'm just talking nonsense.

Quote:

Originally Posted by Elmo370z

It would a pointless mod. You won’t gain anything from it.

I've been trying to do some more research into this.

It makes sense that it should increase throttle response and bring boost in earlier, even if there are no real peaks gains to be had. That said, there are 3 TB kits out there and they've all had the same issues(crazy cold starts, rev hang, idle surge), and too many reports of those issues for me to make that jump.

Also, I think we added #9 to the list. @kingsilvia on IG, not sure if he's a forum member or not.

Elmo370z · 01-18-2021, 12:36 PM

Quote:

Originally Posted by Whjaxn17

I've been trying to do some more research into this.

It makes sense that it should increase throttle response and bring boost in earlier, even if there are no real peaks gains to be had. That said, there are 3 TB kits out there and they've all had the same issues(crazy cold starts, rev hang, idle surge), and too many reports of those issues for me to make that jump.

Also, I think we added #9 to the list. @kingsilvia on IG, not sure if he's a forum member or not.

It’s not going to bring boost in earlier. You want to increase turbo response, increase displacement, move to a smaller turbo, Tuning will take care of throttle response.

Spooler · 01-18-2021, 01:58 PM

Quote:

Originally Posted by Whjaxn17

I've been trying to do some more research into this.

It makes sense that it should increase throttle response and bring boost in earlier, even if there are no real peaks gains to be had. That said, there are 3 TB kits out there and they've all had the same issues(crazy cold starts, rev hang, idle surge), and too many reports of those issues for me to make that jump.

Also, I think we added #9 to the list. @kingsilvia on IG, not sure if he's a forum member or not.

The only reason I would go to a larger throttle body is if they were the reason for a restriction and changing them out would correct that issue. It can be measured via a boost gauge before and after the throttle body. I just don't see a need in doing so at this time. I have a few other restriction issues that would need to be fixed first.

Hotrodz · 01-18-2021, 09:01 PM

Quote:

Originally Posted by Whjaxn17

I've been trying to do some more research into this.

It makes sense that it should increase throttle response and bring boost in earlier, even if there are no real peaks gains to be had. That said, there are 3 TB kits out there and they've all had the same issues(crazy cold starts, rev hang, idle surge), and too many reports of those issues for me to make that jump.

Also, I think we added #9 to the list. @kingsilvia on IG, not sure if he's a forum member or not.

The only real benefit is that it is added insurance of a manifold failure as the waffle is pretty dang efficient up to a point. My only real reason for jumping in is because I have the funds to do it and I try and over build everything. Why....because racecar!!!

01-14-2021, 08:23 AM	#3 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	Yep, add me to the mix! Let's do this!!! johnxxx, Spooler and Whjaxn17 like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-14-2021, 09:02 AM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,144 Drives: 2013 Nismo 370z Rep Power: 2684394	Still waiting on JCHammond and GeauxTigers1 to respond. jchammond likes this.

01-14-2021, 06:15 PM	#5 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Put me on the list behind Hotrodz Hotrodz, johnxxx and -ZS-Carpenter like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-16-2021, 02:02 AM	#6 (permalink)
GeauxTigers1 Track Member Join Date: Nov 2011 Location: Surprise, Az Posts: 590 Drives: 2017 370Z Nismo Rep Power: 6745	#8 please!! johnxxx, Spooler and jchammond like this. __________________ Fast Intentions Kit Stage 2 #076 2017 Twin Turbo 370z Nismo. JMS Built Block, Closed Deck 874whp, 803lbs Tq e85 Ecutek Tune

01-16-2021, 02:03 AM	#7 (permalink)
GeauxTigers1 Track Member Join Date: Nov 2011 Location: Surprise, Az Posts: 590 Drives: 2017 370Z Nismo Rep Power: 6745	Do we have any idea if we can port these and possibly get some power gain? __________________ Fast Intentions Kit Stage 2 #076 2017 Twin Turbo 370z Nismo. JMS Built Block, Closed Deck 874whp, 803lbs Tq e85 Ecutek Tune

01-13-2021, 10:48 PM	#1 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,144 Drives: 2013 Nismo 370z Rep Power: 2684394	2 more to go and one to find out what the shipping to Canada will be.

01-16-2021, 01:29 PM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,144 Drives: 2013 Nismo 370z Rep Power: 2684394	I am out of folks I know. Some of you guys may want to reach out to your boosted friends. We have 2 more slots to fill.

01-16-2021, 03:24 PM	#10 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4550	Probably a little too late for this since the production piece is already made, but thoughts about making the inlet of the intake manifold where it meets to the throttle body larger to fit a 75mm 2009-2014 Nissan Maxima throttle body so boosted guys can have a 75mm (3 inch) going all the way from the intercooler through the intake pipe through the Maxima throttle body all the way into the intake manifold? Maybe I'm just talking nonsense. __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SOHO Motorsports Stage One VHR Top Mount Kit	Nik@SOHO	Forced Induction	38	09-29-2020 07:17 PM
SOHO Motorsports 370Z / G37 Cold Air Intake Kit (69 mm)	Nik@SOHO	Intake/Exhaust	8	06-04-2019 10:30 AM
[FOR SALE] Soho Motorsports Lower Intake Manifold	vil9j	Parts for sale (Private Classifieds)	3	06-01-2018 11:22 AM
CJ Motorsports VHR Intake Manifold	G37sHKS	Intake/Exhaust	386	09-30-2017 07:25 PM
Motordyne M370 Intake Manifold Group Buy	Endgame	Intake/Exhaust	12	10-08-2010 12:43 PM