Any Supporting Mods I am missing for my Turbo build?

Randomizer23 · 10-07-2020, 12:06 PM

I am looking to make 800whp with these supporting mods (does not include built motor and turbo kit). Those prices are just a rough estimate at this point in time. Any changes/recommendations that I should do? Also I will be going with the Boosted Performance kit.

JLarson · 10-07-2020, 01:35 PM

You could consider ported upper and lower manifolds. That should help in your journey to 800.

Rusty · 10-07-2020, 01:45 PM

Better and a 1 to the front of the price for the gauges. Good gauges will run you about $150 and up.

Randomizer23 · 10-07-2020, 01:53 PM

Quote:

Originally Posted by Rusty

Better and a 1 to the front of the price for the gauges. Good gauges will run you about $150 and up.

Did not know that thank you those were just estimates without actually checking the price of gauges haha.

Randomizer23 · 10-07-2020, 01:53 PM

Quote:

Originally Posted by JLarson

You could consider ported upper and lower manifolds. That should help in your journey to 800.

Yea I was thinking abt this and wondering how much it will actually help.

JLarson · 10-07-2020, 02:03 PM

Quote:

Originally Posted by Randomizer23

Yea I was thinking abt this and wondering how much it will actually help.

Soho showed a 38 whp increase at peak with just the ported lower when running 11.5 psi and a tt kit, so there is some benefit.

Randomizer23 · 10-07-2020, 02:20 PM

Quote:

Originally Posted by JLarson

Soho showed a 38 whp increase at peak with just the ported lower when running 11.5 psi and a tt kit, so there is some benefit.

Wow thats pretty good imo

Spooler · 10-07-2020, 03:49 PM

Don't port the upper. Leave it alone. You need all the plastic you can get to hold it together. LOL

JLarson · 10-07-2020, 04:00 PM

Quote:

Originally Posted by Spooler

Don't port the upper. Leave it alone. You need all the plastic you can get to hold it together. LOL

Lol with my much lower levels of boost I hadn't thought about that.

Boosted Performance · 10-08-2020, 12:16 AM

Some results from a G35 DE:

https://photos.app.goo.gl/pdjn38LA1a5GkQCLA

883WHP and 754ft/tq on E50 fuel.

If the DE's can do it, the VHR can do it EASILY. This is with a 68mm turbo.

2011 Nismo#91 · 10-08-2020, 06:36 AM

Any changes to your exhaust needed?
Motor Mounts, transmission mounts?
Did you give the Wavetech LSD a look?

Some maintenance items you might want to consider.
Oil Gallery Gasket replacement? You have an 09 right?
Timing chain kit?

JARblue · 10-08-2020, 08:24 AM

Driver mod?

Ghostvette · 10-08-2020, 08:31 AM

Silly question time, why a GPS speedometer? That seems like an expensive thing that doesn't do a lot for the car.

You might want to consider a triple disk carbon clutch & pressure plate like Spooler's. TBH, I'm not familiar with a 'stage 4' clutch..... who makes it, etc.

You did forget one important thing.... a 'whoops, my engine popped' fund....

Spooler · 10-08-2020, 08:40 AM

Pic out what you want to use.

Fast Intentions Stage 2.5 TT kit
Fast Intentions Crash bar
Fast Intentions 3" exhaust with Carbon Fiber mufflers
ATS Triple Carbon Clutch with external Nissan CSC
2-Walboro 450
CJ Motorsports duel fuel pump setup
IDA1700cc injectors
IDF-750 Fuel filter
MA-Motorsports custom built fuel return system for E85
JWT C2 exhaust cams with new water pump, Timing chains, Guides and tensioners
Upgraded front cover Oil galley gaskets/fasteners
Suckerpunch oil pump
MA-Motorsports ATI fluid damper (already on the car)
34 row FI oil cooler (already on the car)
Radium Catch Cans
Mazworx built Long Block
Carrillo Pro Rods
CP Pistons 10:1
Darton MID sleeves
Ported heads with 1mm larger valves
Iconel Exhaust valves
L19 head studs
OS Giken 1.5 LSD (already on the car)
Z1 Motorsports Poly Diff bushings (already on the car)
MA-Motorsports Diff cooler
Finite Element Design Carbon Fiber 3" cooling ducts
Stillen Front Brake cooling duct kit
Z1 2-piece rotors front and rear (already on the car)
Carbotech XP8 pads front/rear (already on the car)
E85 content gauge, etc.
Eboost2 boost controller/gauge
Galeforce custom single gauge pillar
Ecuteck tuning with Flexfuel
DSS Pro Level Axles
Aragosta Coilovers 12k/10k Swift springs upgrade
Corner Balanced by MA-Motorsports
SSR MS3 wheels
Front 19x10 +29
Rear 19x11.5 +30
Toyo R888r
Front 285/35/19
Rear 325/30/19
Race Rear wheels and Tires
Weld Wheels 17x10.5 6.5in. backspacing High Hat
MT Street R radials 305/45/17
SPL FUCA’s
SPL Midlinks
SPL Swaybar endlinks
SPL Rear Camber arms
SPL lockout kit for Camber and Toe for the Rear
Factory Recaro seats from V2 370z Nismo
Tracspec Vents for the hood.
NISMO Solid rear Subframe bushings
Modified Bellworks diff brace
CJ- Motorsports solid engine mounts.
Hotchkis Front Sway bar.
CSF Triple Pass Radiator

Spooler · 10-08-2020, 08:43 AM

Quote:

Originally Posted by Boosted Performance

Some results from a G35 DE:

https://photos.app.goo.gl/pdjn38LA1a5GkQCLA

883WHP and 754ft/tq on E50 fuel.

If the DE's can do it, the VHR can do it EASILY. This is with a 68mm turbo.

Making HP is the easy part. Getting the engine to stay together is a whole new ballgame.

10-07-2020, 01:35 PM	#2 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684369	You could consider ported upper and lower manifolds. That should help in your journey to 800. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

10-07-2020, 01:45 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,867 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Better and a 1 to the front of the price for the gauges. Good gauges will run you about $150 and up. Chuck33079, jchammond and JLarson like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-07-2020, 03:49 PM	#8 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,518 Drives: 2013 Nismo 370z Rep Power: 2684391	Don't port the upper. Leave it alone. You need all the plastic you can get to hold it together. LOL JARblue, JLarson and Randomizer23 like this.

10-08-2020, 12:16 AM	#10 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Some results from a G35 DE: https://photos.app.goo.gl/pdjn38LA1a5GkQCLA 883WHP and 754ft/tq on E50 fuel. If the DE's can do it, the VHR can do it EASILY. This is with a 68mm turbo. -ZS-Carpenter and JLarson like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

10-08-2020, 06:36 AM	#11 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,381 Drives: slowly Rep Power: 33858	Any changes to your exhaust needed? Motor Mounts, transmission mounts? Did you give the Wavetech LSD a look? Some maintenance items you might want to consider. Oil Gallery Gasket replacement? You have an 09 right? Timing chain kit? Rusty likes this.

10-08-2020, 08:24 AM	#12 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Driver mod? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

10-08-2020, 08:31 AM	#13 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684376	Silly question time, why a GPS speedometer? That seems like an expensive thing that doesn't do a lot for the car. You might want to consider a triple disk carbon clutch & pressure plate like Spooler's. TBH, I'm not familiar with a 'stage 4' clutch..... who makes it, etc. You did forget one important thing.... a 'whoops, my engine popped' fund.... Optimiser likes this. __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

10-08-2020, 08:40 AM	#14 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,518 Drives: 2013 Nismo 370z Rep Power: 2684391	Pic out what you want to use. Fast Intentions Stage 2.5 TT kit Fast Intentions Crash bar Fast Intentions 3" exhaust with Carbon Fiber mufflers ATS Triple Carbon Clutch with external Nissan CSC 2-Walboro 450 CJ Motorsports duel fuel pump setup IDA1700cc injectors IDF-750 Fuel filter MA-Motorsports custom built fuel return system for E85 JWT C2 exhaust cams with new water pump, Timing chains, Guides and tensioners Upgraded front cover Oil galley gaskets/fasteners Suckerpunch oil pump MA-Motorsports ATI fluid damper (already on the car) 34 row FI oil cooler (already on the car) Radium Catch Cans Mazworx built Long Block Carrillo Pro Rods CP Pistons 10:1 Darton MID sleeves Ported heads with 1mm larger valves Iconel Exhaust valves L19 head studs OS Giken 1.5 LSD (already on the car) Z1 Motorsports Poly Diff bushings (already on the car) MA-Motorsports Diff cooler Finite Element Design Carbon Fiber 3" cooling ducts Stillen Front Brake cooling duct kit Z1 2-piece rotors front and rear (already on the car) Carbotech XP8 pads front/rear (already on the car) E85 content gauge, etc. Eboost2 boost controller/gauge Galeforce custom single gauge pillar Ecuteck tuning with Flexfuel DSS Pro Level Axles Aragosta Coilovers 12k/10k Swift springs upgrade Corner Balanced by MA-Motorsports SSR MS3 wheels Front 19x10 +29 Rear 19x11.5 +30 Toyo R888r Front 285/35/19 Rear 325/30/19 Race Rear wheels and Tires Weld Wheels 17x10.5 6.5in. backspacing High Hat MT Street R radials 305/45/17 SPL FUCA’s SPL Midlinks SPL Swaybar endlinks SPL Rear Camber arms SPL lockout kit for Camber and Toe for the Rear Factory Recaro seats from V2 370z Nismo Tracspec Vents for the hood. NISMO Solid rear Subframe bushings Modified Bellworks diff brace CJ- Motorsports solid engine mounts. Hotchkis Front Sway bar. CSF Triple Pass Radiator JARblue, Rusty, Optimiser and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Switchback Racing turbo kit + supporting mods	seanmorr370	Parts for sale (Private Classifieds)	8	08-12-2020 09:17 PM
[FOR SALE] AAM stage 1.5 modified twin turbo kit+supporting mods(INSTALLATION AVAILABLE)	Rid3_FaM0uS	Parts for sale (Private Classifieds)	37	04-04-2018 08:16 AM
Labor Hours for a TT build + supporting mods.	shadow85	Nissan 370Z General Discussions	7	01-31-2018 03:49 AM
AAM Twin Turbo Build supporting mods?	370z46	Forced Induction	29	04-29-2017 12:24 PM
[WTB] Supporting mods for turbo (Oil cooler, Injectors, etc)	squid267	Parts for sale (Private Classifieds)	2	05-13-2016 05:56 PM