|
So I have an issue with my steering shaft hitting the turbo housing with the kit we're trying to fit my car. Gamma Motors has said they don't offer the
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
09-04-2017, 06:01 PM
|
#1 (permalink) |
|
Base Member
Join Date: Feb 2016
Location: Hattiesburg, MS
Posts: 43
Drives: 09 370Z Touring M6
Rep Power: 9  |
Looking for help with GTM Knuckle or Equivalent
So I have an issue with my steering shaft hitting the turbo housing with the kit we're trying to fit my car.
Gamma Motors has said they don't offer the part (steering knuckle) or either they don't have it in stock. I've seen some universal knuckles / u joints on ebay but I'm unsure of the spline and measurements I'll need. The car is back off the wrack and I'll need to take care of this before taking it back to the shop. If anyone has any specifications or input (or maybe even a GTM / Gamma Motors piece laying around somewhere . . .) it will be greatly appreciated! Thanks. Picture for reference. 
Last edited by TBW370; 09-04-2017 at 09:48 PM. |
|
|
|
09-04-2017, 06:12 PM
|
#2 (permalink) |
|
Track Member
Join Date: Mar 2015
Location: Michigan
Posts: 542
Drives: 370Z Nismo
Rep Power: 9469  |
I had the same issue with my GTR turbos. Nobody sells the knuckles but i did make my own shims to space out the steering rack. basically use washers to space it out and see if it would fit
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GTM / Gamma Motors steering knukcle or equivalent | TBW370 | Engine & Drivetrain | 2 | 09-05-2017 09:00 AM |
| Who the **** leaves the equivalent of small motor in the middle of I 45 | Mozen | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 31 | 03-28-2011 12:17 PM |
Linear Mode
