GTM / Gamma Motors steering knukcle or equivalent

TBW370

So I have an issue with my steering shaft hitting the turbo housing with the kit we're trying to fit my car.

Gamma Motors has said they don't offer the part (steering knuckle) or either they don't have it in stock. I've seen some universal knuckles / u joints on ebay but I'm unsure of the spline and measurements I'll need.

The car is back off the wrack and I'll need to take care of this before taking it back to the shop. If anyone has any specifications or input (or maybe even a GTM / Gamma Motors piece laying around somewhere . . .) it will be greatly appreciated!

Thanks.

Picture for reference.

[IMG][/IMG]

BGTV8

You need to check out Borgeson.com - the item in your photo looks suspiciously like a stock Borgeson item.

That said, you will absolutely require spline count and shaft size.

Hopefully someone on the forum has that level of detail, failing which you can check out the FSM and it may have that detail.

I'd be very wary of EBay stuff ............ but that is just me.

Jayhovah

Contact Jason at Inland Speed and Customs. He worked with GTM and Gamma and can still source some of their parts. He's a good guy and has helped me out a lot... helped me find some parts just last week.

Jason@Inland Speed and Customs
(909) 561-7903

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted