Looking for help with GTM Knuckle or Equivalent
 

So I have an issue with my steering shaft hitting the turbo housing with the kit we're trying to fit my car.

Gamma Motors has said they don't offer the part (steering knuckle) or either they don't have it in stock. I've seen some universal knuckles / u joints on ebay but I'm unsure of the spline and measurements I'll need.

The car is back off the wrack and I'll need to take care of this before taking it back to the shop. If anyone has any specifications or input (or maybe even a GTM / Gamma Motors piece laying around somewhere . . .) it will be greatly appreciated!

Thanks.

Picture for reference.

http://i66.tinypic.com/2rzq6wo.jpg

I had the same issue with my GTR turbos. Nobody sells the knuckles but i did make my own shims to space out the steering rack. basically use washers to space it out and see if it would fit