GTM Stage 1.5 Diverter valve noise

kentmo280z · 01-14-2017, 06:42 AM

Originally Posted by fryzia23 View Post
Kentmo, the turbosmart bpv gets loud when off throttle. There's no real way to quiet it down. It turns heads and can scare the crap out of people! The spring tightness does not really matter, at least did not feel any real difference. I try to keep at medium tightness most of the time. The biggest issue with turbosmart bpv I've had is that the piston inside gets dirty, dry and eventually gets stuck or leaking boost when full throttle. Even once a month cleaning and lubing did not help. So after my last track day and very leaky bpv I decided to try something different. It took me 6 months of waiting to finally receive the synapse diverter valve. I haven't gotten a chance to install it yet. Also haven't been driving the car due to winter so I am not in real rush plus need to cut off and weld on new flange for the synapse diverter valve.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Valve Noise?	TedB370z	Engine & Drivetrain	17	03-14-2016 10:06 AM
GTM TT Stage 1 * Forged Internals * GTM Stage 4 Transmission * GTM Return Fuel *	G37sHKS	Forced Induction	225	08-31-2014 11:48 AM
If TRQ kills 7at trannies, is stage 1 any safer than stage 1.5?	brucelidat	Forced Induction	4	09-16-2013 11:46 PM
Increased Valve Noise After Change To Amsoil	iwasgointo	Nissan 370Z General Discussions	40	09-01-2010 03:34 PM

01-14-2017, 06:42 AM	#2 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 12	Originally Posted by fryzia23 View Post Kentmo, the turbosmart bpv gets loud when off throttle. There's no real way to quiet it down. It turns heads and can scare the crap out of people! The spring tightness does not really matter, at least did not feel any real difference. I try to keep at medium tightness most of the time. The biggest issue with turbosmart bpv I've had is that the piston inside gets dirty, dry and eventually gets stuck or leaking boost when full throttle. Even once a month cleaning and lubing did not help. So after my last track day and very leaky bpv I decided to try something different. It took me 6 months of waiting to finally receive the synapse diverter valve. I haven't gotten a chance to install it yet. Also haven't been driving the car due to winter so I am not in real rush plus need to cut off and weld on new flange for the synapse diverter valve.