02-17-2017, 01:26 PM
|
#11 (permalink)
|
|
Enthusiast Member
Join Date: Nov 2016
Location: Youngstown, FL
Posts: 256
Drives: 2015 PW Nismo 6MT
Rep Power: 9
|
Quote:
Originally Posted by RJ MFG
If you daily this on the stage 1 and 1.5 kits you will have zero heatsoak issues. We have over built the cooling in this system to support sustained 1000whp pulls over and over. This is going to be an extremely reliable kit. Remember your getting an oversized Heat exchanger and its twin pass. Meaning that the coolant stays in the heat exchanger longer for more cooling efficiency. In addition to that the Intercooler itself is over sized for the 1 and 1.5 kits. as well as the supercharger will not be maxing out its capabilities meaning the whole unit will stay super cool.  |
I didn't mean cooling issues with respect to the unit itself, or the intercooler -- just the general buildup of heat within the engine compartment that gets into everything when running a FI system...raising overall temps.
An active venting arrangement could pull cool air up and out through the hood, which would help when sitting idling. Small high-speed fans could be mounted in the hood, with electrical wiring running up the back near the hinges. Perhaps this might offer a good compromise slightly narrowing the differences between water and A2A.
Just a thought.
Bruce
|
|
|
Similar Threads
1691Likes
Threaded Mode
