Install location of Stillen SC cooler AND Stillen Oil cooler AND ps cooler

imazman · 11-28-2016, 09:26 PM

Quote:

Originally Posted by Optimiser

My car is RHD and looking at the front of the car I have the SC cooler on the drivers side above the PS cooler and my oil cooler is on the right and was lowered a bit to accommodate the installation.

Thanks for the info, my car is not RHD and my PS cooler is on the passenger side. So do you have the two intake filters and their Y tube on the same side as the SC cooler?

/Z/

Optimiser · 11-29-2016, 03:51 PM

Quote:

Originally Posted by imazman

Thanks for the info, my car is not RHD and my PS cooler is on the passenger side. So do you have the two intake filters and their Y tube on the same side as the SC cooler?

/Z/

No. The opposite side.

imazman · 12-07-2016, 10:06 PM

I called Stillen and their recommandation is to keep both the SC heat exchanger and the oil cooler on the passenger side and move the power steering cooler to the driver side. I did that, and so far everything is working out quite well. However, I did have to move the oilcooler further toward the passenger side by drilling new holes in the oil coolers mounting bracket but that was only because the intake filters were hitting both the oil cooler and the center verticle latch support. So I also grinded down center vertical support a bit.

/Z/

ChaseZ · 12-18-2016, 03:15 PM

Quote:

Originally Posted by imazman

I called Stillen and their recommandation is to keep both the SC heat exchanger and the oil cooler on the passenger side and move the power steering cooler to the driver side. I did that, and so far everything is working out quite well. However, I did have to move the oilcooler further toward the passenger side by drilling new holes in the oil coolers mounting bracket but that was only because the intake filters were hitting both the oil cooler and the center verticle latch support. So I also grinded down center vertical support a bit.

/Z/

I've jut been relocating my oil cooler today. Decided on drivers side, higher up, inverted and pushed back a bit; as Im using a Frozen Boost intercooler instead so it will fit below the crash bar. I'll fab up some brackets for the OC and IC that mount on the crash bar. Thought I had some flat stock hanging around the garage but no such luck otherwise I could finish that part up today.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 vs Stillen Oil Cooler	Bshields22	Engine & Drivetrain	10	12-08-2015 05:39 PM
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
SC & Z1 oil cooler + stillen AT cooler	brutusvk	Forced Induction	61	10-21-2015 08:22 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
STILLEN oil cooler kit + STILLEN power steering cooler = fit?	ZBW39	STILLEN	2	07-02-2010 01:08 PM

12-07-2016, 10:06 PM	#3 (permalink)
imazman Base Member Join Date: Jan 2014 Location: PA Posts: 120 Drives: 11' 370Z Nismo Rep Power: 13	I called Stillen and their recommandation is to keep both the SC heat exchanger and the oil cooler on the passenger side and move the power steering cooler to the driver side. I did that, and so far everything is working out quite well. However, I did have to move the oilcooler further toward the passenger side by drilling new holes in the oil coolers mounting bracket but that was only because the intake filters were hitting both the oil cooler and the center verticle latch support. So I also grinded down center vertical support a bit. /Z/