AAM 370Z Twin Turbo: COMPLETE 500RWHP/372RWTQ: [Heavy Pic Content Inside]

Nixlimited · 12-30-2009, 03:17 PM

Quote:

Originally Posted by JoeyD

Shipping a turbo kit without any type of cabin mounted boost control is actually a smart way to go about it. There are dozens of selections for electronic boost controllers and every person will have their preference.

I wasn't talking about the kit, I was talking about the finished car.

Jon@Altered · 12-31-2009, 09:20 AM

Quote:

Originally Posted by Goolsbymd

Did you guys check the coolant pressure? Im intrested however im curious how the head studs, input/out put shafts, motor internals (push rods, pistons, fuel spray pattern) holding up?

Hopefully I can cover everything for you with my answer here; the coolant pressure is unaffected by Twin Turbo install, we maintained healthy operating temps for the engine, and at this point, saw no need to upgrade the radiator or any other coolant accessories on the motor. We did however, install an external AAM Comp Oil Cooler on the car, to keep the engine oil temps down on hot days or during track use.

The factory VQ37VVEL engine is a very stout, adept motor from the factory, capable of easily supporting over 500rwhp. At these conservative boost levels, there really isn't much concern about lifting heads, so factory head bolts, head gasket, etc. were left untouched. We didn't even go internal much at all really; just a basic Twin Turbo Install. The customer wanted a car that would perform well on the track, but more importantly, he wanted the car to look and feel like factory on the street.

In addition, the 370Z engine is actually not a push-rod type engine, it is a traditional Dual Overhead Cam. The factory pistons and connecting rods will be strong enough to support the cars power output at the current boost level settings, thus internal engine upgrades will not be necessary until the customer requests higher power output and higher boost levels.

-jon

Goolsbymd · 01-01-2010, 03:01 PM

Thank you i appreciate the answer.

B1nks · 01-01-2010, 03:11 PM

wh00pass !

Hi-TecDesigns · 01-04-2010, 10:29 AM

Quote:

Originally Posted by FuszNissan

Where's my Z

Lou,

Are you saying you still haven't seen your car? You dropped it off mid-August! That 4-6 week turn-around is now 20 and growing...

FuszNissan · 01-06-2010, 10:59 AM

Pretty much

Hi-TecDesigns · 01-07-2010, 10:45 AM

Makes me glad I didn't go down that road with AAM, then. I was attempting to work with them, but I gave up after weeks would go by and no updates, as promised. I went down that road once before with another company where a "3 weeks, no problem, we promise!" turned into week #9's "You have one week to get it back to me or I'll see you in court!" Sad.

Jon@Altered · 01-07-2010, 04:35 PM

I'm sorry about that Lou. Trust me when I say, we are working diligently on your car and engine, and it's coming right along! I have some new progress pics that I shot recently of the car coming together! Check these out:

In regards to the time frame, I apologize for the slower process, but bear in mind these are custom Twin Turbo Kits that we hand build in house, on the car, and it does take a bit longer than an on the shelf kit that you can just purchase and install. Twin Turbocharging a factory naturally aspirated car is an incredibly intricate process, and we take all the necessary steps to ensure the install is done correctly the first time around.

And Hi-Tec, I'm not sure if we had your car here at some point, or if you were looking for a service estimate, but if there's anything I can do for you or any questions you have regarding this build or any of our others, send me a pm or email me and I'd be more than happy to help you out!

Clint@Altered · 01-07-2010, 05:06 PM

We're getting very close to completing Lou's vehicle. The motor should be back up into the vehicle in the next few days.

To reiterate what Jon stated above, the time frame for the custom TT builds has been long - much more than normal.

Along with the many many other shop and customer projects we have going on (From GT-Rs to scions and AAM's Own TT 370Z - just wait!) and our normal day to day CNC machining and parts production, we try our best balance into our schedule everything that goes into custom turbo builds like Lou's: The kit fabrication (manifolds, Intercooler, Intercooler Piping, Intake routing, brackets, w/gs etc), the in-house machining of the kit components (coolant plugs, block distribution, turbo install pieces, etc) and the actual installation of the kit itself.

Unfortunately, some custom fabrication/installations get drawn out longer than anyone could have anticipated. We certainly don't want this and we do what we can to hasten the process and accommodate our customers with sacrificing quality. The bottom line is: we strive to deliver a final product which exceeds both our customer's and our own expectations.

Rest assured, Lou's car will be alive soon!

FuszNissan · 01-08-2010, 09:43 AM

I would like to chime in:
First off,
My post are not meant to be negative in any way. If anything just a little frustration.
I am completely happy I went with AAM, If I had to do this again I wouldn't pick another company. I know that in the end this car will be put together perfect and every part will have been planned out and installed to fit like a glove.

My biggest goal with this project was quality control, and I honestly don't think it gets any better then an in house build.

I understand that it takes time, I have built a custom home, and if anybody in here has too, knows that that the builder never finishes on time, never.

Communication has been great, Rob Son has given me updates just about every week, I am sure he is tired of hearing from me. It's tough being out of town, but this is the only way I know whats going on.

As for Hi-tech, I am not sure what happened, but I am sure AAM will do what it takes to help you out with your project.

Just my

One more thing, has the DeFi gauges been installed yet and do you have any pics? I know Modshack would appreciate them too!

CrownR426 · 01-08-2010, 10:43 AM

I would love to hear this on the streets!
Any video's?!

FuszNissan · 01-08-2010, 10:52 AM

Go to page 1

FuszNissan · 01-08-2010, 10:54 AM

Being that the exhaust manifolds are so close to the headers, do you see heat being an issue over time? (affecting boost)

Jon@Altered · 01-08-2010, 11:46 AM

New pictures! Well, not much different than the others, but it is the passenger side turbo oil and coolant lines routed and ready to go! This should be the final prep stage with the engine out of the car, and from here, the engine should be ready to go back into the car, at which point we can put the final touches on the car and get her ready to fire up!

Up close and personal:

CBRich · 01-08-2010, 02:03 PM

I know you guys build a lot of cars but I hope you still get that feeling like a little kid every time you fire one up like this.

01-01-2010, 03:01 PM	#78 (permalink)
Goolsbymd Base Member Join Date: Oct 2009 Location: Hampton, VA Posts: 84 Drives: 09 370z Rep Power: 15	Thank you i appreciate the answer. __________________ 09 370 base w/ sport AT Mag. Black, 20% tint, CF B Pillars, MR Works LED/Blacked out light combo. Soon: Stillen SC/Venaci Heros/Carbon fiber pieces.

01-06-2010, 10:59 AM	#81 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Pretty much __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

01-07-2010, 10:45 AM	#82 (permalink)
Hi-TecDesigns Base Member Join Date: Jul 2009 Location: Glenelg, MD Posts: 146 Drives: 370 Rdstr AT7 BkChry Rep Power: 15	Makes me glad I didn't go down that road with AAM, then. I was attempting to work with them, but I gave up after weeks would go by and no updates, as promised. I went down that road once before with another company where a "3 weeks, no problem, we promise!" turned into week #9's "You have one week to get it back to me or I'll see you in court!" Sad. __________________ http://hi-tecdesigns.com/images/pict...on%20Small.gif 2000 S2000 Brickyard Red Metallic w/ Romanesque Crimson Kandy, custom everything else

01-07-2010, 04:35 PM	#83 (permalink)
Jon@Altered The370Z.com Sponsor Join Date: Dec 2008 Location: Washington, D.C. Posts: 135 Drives: Nissan 350Z Rep Power: 284	I'm sorry about that Lou. Trust me when I say, we are working diligently on your car and engine, and it's coming right along! I have some new progress pics that I shot recently of the car coming together! Check these out: In regards to the time frame, I apologize for the slower process, but bear in mind these are custom Twin Turbo Kits that we hand build in house, on the car, and it does take a bit longer than an on the shelf kit that you can just purchase and install. Twin Turbocharging a factory naturally aspirated car is an incredibly intricate process, and we take all the necessary steps to ensure the install is done correctly the first time around. And Hi-Tec, I'm not sure if we had your car here at some point, or if you were looking for a service estimate, but if there's anything I can do for you or any questions you have regarding this build or any of our others, send me a pm or email me and I'd be more than happy to help you out! __________________ “Being second is to be the first of the ones who lose.” ~ Ayrton Senna Last edited by Jon@Altered; 01-07-2010 at 04:42 PM.

01-07-2010, 05:06 PM	#84 (permalink)
Clint@Altered The370Z.com Sponsor Join Date: Jan 2009 Location: DC Posts: 38 Drives: econobox Rep Power: 16	We're getting very close to completing Lou's vehicle. The motor should be back up into the vehicle in the next few days. To reiterate what Jon stated above, the time frame for the custom TT builds has been long - much more than normal. Along with the many many other shop and customer projects we have going on (From GT-Rs to scions and AAM's Own TT 370Z - just wait!) and our normal day to day CNC machining and parts production, we try our best balance into our schedule everything that goes into custom turbo builds like Lou's: The kit fabrication (manifolds, Intercooler, Intercooler Piping, Intake routing, brackets, w/gs etc), the in-house machining of the kit components (coolant plugs, block distribution, turbo install pieces, etc) and the actual installation of the kit itself. Unfortunately, some custom fabrication/installations get drawn out longer than anyone could have anticipated. We certainly don't want this and we do what we can to hasten the process and accommodate our customers with sacrificing quality. The bottom line is: we strive to deliver a final product which exceeds both our customer's and our own expectations. Rest assured, Lou's car will be alive soon! __________________ *AAM COMPETITION VQ37 Turn-Key Twin Turbo Packages* *Available Now!* www.alteredatmosphere.com ClintonM@alteredatmosphere.com Last edited by Clint@Altered; 01-07-2010 at 05:11 PM.

01-01-2010, 03:11 PM	#79 (permalink)
B1nks Track Member Join Date: Apr 2009 Location: Houston,Tx Posts: 721 Drives: 2009 370Z Base 6MT Rep Power: 507	wh00pass !

01-08-2010, 09:43 AM	#85 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	I would like to chime in: First off, My post are not meant to be negative in any way. If anything just a little frustration. I am completely happy I went with AAM, If I had to do this again I wouldn't pick another company. I know that in the end this car will be put together perfect and every part will have been planned out and installed to fit like a glove. My biggest goal with this project was quality control, and I honestly don't think it gets any better then an in house build. I understand that it takes time, I have built a custom home, and if anybody in here has too, knows that that the builder never finishes on time, never. Communication has been great, Rob Son has given me updates just about every week, I am sure he is tired of hearing from me. It's tough being out of town, but this is the only way I know whats going on. As for Hi-tech, I am not sure what happened, but I am sure AAM will do what it takes to help you out with your project. Just my One more thing, has the DeFi gauges been installed yet and do you have any pics? I know Modshack would appreciate them too! __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

01-08-2010, 10:43 AM	#86 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	I would love to hear this on the streets! Any video's?! __________________ Love + Hardwork + Passion RIP SVTRacer

01-08-2010, 10:52 AM	#87 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Go to page 1 __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

01-08-2010, 10:54 AM	#88 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	Being that the exhaust manifolds are so close to the headers, do you see heat being an issue over time? (affecting boost) __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

01-08-2010, 11:46 AM	#89 (permalink)
Jon@Altered The370Z.com Sponsor Join Date: Dec 2008 Location: Washington, D.C. Posts: 135 Drives: Nissan 350Z Rep Power: 284	New pictures! Well, not much different than the others, but it is the passenger side turbo oil and coolant lines routed and ready to go! This should be the final prep stage with the engine out of the car, and from here, the engine should be ready to go back into the car, at which point we can put the final touches on the car and get her ready to fire up! Up close and personal: __________________ “Being second is to be the first of the ones who lose.” ~ Ayrton Senna Last edited by Jon@Altered; 01-08-2010 at 12:56 PM. Reason: New photos...

01-08-2010, 02:03 PM	#90 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	I know you guys build a lot of cars but I hope you still get that feeling like a little kid every time you fire one up like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z vs. 300zx twin turbo	bmarcinczyk14	Nissan 370Z General Discussions	57	04-03-2010 09:39 PM
Wingless, but she can still fly! : R35 Content inside	Jon@Altered	Other Vehicles	12	10-26-2009 04:06 PM
Seabass 370z Twin Turbo	370zTwinTurbo	New Forum Member	22	09-29-2009 09:23 AM
GTM Twin Turbo 370z	evse82	Australia/New Zealand	6	09-22-2009 11:05 AM
Twin Turbo Kit for 370z	soaka1	Engine & Drivetrain	3	05-14-2009 07:31 AM