TAKING ORDERS for winter 2017 turbo kits

James10694 · 06-10-2017, 12:52 AM

Lol^

Elmo370z · 06-10-2017, 10:39 PM

Guess I"ll rephrase it. Will you have anymore kits available around September. I'm asking because I'll be placing my order for a billet crankshaft for my build and if the numbers for the stage 2 cam don't pan out to my liking, I want to place a order for this kit.

Boosted Performance · 06-11-2017, 12:11 AM

Quote:

Originally Posted by Elmo370z

Guess I"ll rephrase it. Will you have anymore kits available around September. I'm asking because I'll be placing my order for a billet crankshaft for my build and if the numbers for the stage 2 cam don't pan out to my liking, I want to place a order for this kit.

Yes, I will have more kits before then.

Elmo370z · 06-11-2017, 09:03 AM

Quote:

Originally Posted by Boosted Performance

Yes, I will have more kits before then.

Thank you

Elmo370z · 06-11-2017, 09:05 AM

Quote:

Originally Posted by Elmo370z

Thank you

Click on the first page

xdragus · 06-11-2017, 08:28 AM

Does the kit work with FI tt-tdx or go with the FI regular tdx?

Also any problems if I have a FI RHFC installed instead of test pipes? Or does the 3" down pipes remove this part?

Besides new clutch, gauges, Csc, and oil coolers. What else would be good to purchase?

And for the kit...is that $7980 include or exclude taxes?

solidus · 06-11-2017, 10:33 AM

Quote:

Originally Posted by xdragus

Does the kit work with FI tt-tdx or go with the FI regular tdx?

Also any problems if I have a FI RHFC installed instead of test pipes? Or does the 3" down pipes remove this part?

Besides new clutch, gauges, Csc, and oil coolers. What else would be good to purchase?

And for the kit...is that $7980 include or exclude taxes?

Sasha makes a Y that specifically fits the FI exhaust , so that's a go but the test pipes go bye bye because the turbo manifold connects direct to the exhaust manifold. Money well spent would be the CJM fuel return, upgrading the injectors to 1000+ and upgrading the fuel pump. The fuel pump and injector upgrade is'nt really necessary if you're satisfied with being in the 500's because you'll make a bit over 500rwhp safely with a stock block. Also invest in a good turbo blanket, titanium heat wrap, heat sleeves for the vacuum lines and transmission wiring harness. Install and break in the clutch before you get the kit and forget buying an oil cooler as Sasha provides a very good one with the kit.

zashburn · 06-12-2017, 10:19 PM

Quote:

Originally Posted by solidus

Sasha makes a Y that specifically fits the FI exhaust , so that's a go but the test pipes go bye bye because the turbo manifold connects direct to the exhaust manifold. Money well spent would be the CJM fuel return, upgrading the injectors to 1000+ and upgrading the fuel pump. The fuel pump and injector upgrade is'nt really necessary if you're satisfied with being in the 500's because you'll make a bit over 500rwhp safely with a stock block. Also invest in a good turbo blanket, titanium heat wrap, heat sleeves for the vacuum lines and transmission wiring harness. Install and break in the clutch before you get the kit and forget buying an oil cooler as Sasha provides a very good one with the kit.

Have any recommendations as for a good place to buy / which type of heat sleeves to get?

James10694 · 07-31-2017, 08:57 PM

Quote:

Originally Posted by solidus

Sasha makes a Y that specifically fits the FI exhaust , so that's a go but the test pipes go bye bye because the turbo manifold connects direct to the exhaust manifold. Money well spent would be the CJM fuel return, upgrading the injectors to 1000+ and upgrading the fuel pump. The fuel pump and injector upgrade is'nt really necessary if you're satisfied with being in the 500's because you'll make a bit over 500rwhp safely with a stock block.Also invest in a good turbo blanket, titanium heat wrap, heat sleeves for the vacuum lines and transmission wiring harness. Install and break in the clutch before you get the kit and forget buying an oil cooler as Sasha provides a very good one with the kit.

Ill be starting my install in a couple of weeks. Anyone have specifics or links to what they bought for sizing on heat sleeves and turbo bag Ive read about the transmission harness getting crispy so I'm paranoid about that. I saw some stuff by DEI on summits website but I'm not sure what I need.

Elmo370z · 06-11-2017, 11:48 AM

Where would 1050cc max out?

jax4557 · 06-12-2017, 10:08 PM

Quote:

Originally Posted by Elmo370z

Where would 1050cc max out?

I just found out today

79% duty on 1150cc injectors and walbro 385 pump on E85

600hp / 500tq at 14 PSI

Elmo370z · 06-12-2017, 11:44 PM

Quote:

Originally Posted by jax4557

I just found out today

79% duty on 1150cc injectors and walbro 385 pump on E85

600hp / 500tq at 14 PSI

Thank you

Boosted Performance · 06-12-2017, 11:49 PM

Just to provide some more on the heat treatment on everything.

My 350z has this identical kit...going on 3 years. I do not have any heat shielding on anything. If the vacuum hoses are ran as per manual, everything goes upwards, and away from the heat. Same goes for all other components... if they are tucked away as per instructions, you should not have issues.

I also do not have a turbo blanket, no issues at all for some time now.

Now, is it a good preventative measure...absolutely, it does not hurt to have, but it is not a MUST

I hope that provides some clarity. I have had customers choose to ceramic coat everything as well, it is completely up to you. I also have heat wrap and turbo blankets in stock for those that choose to go with the heat wrapping of everything.

Ni55anPat · 06-15-2017, 09:19 PM

For those running catch cans. How would I route with the ARC setup?

See attached picture for reference

NorthStyle · 06-17-2017, 12:24 AM

Quote:

Originally Posted by Ni55anPat

For those running catch cans. How would I route with the ARC setup?

See attached picture for reference

Since you purchased those from DPE, have you tried asking him how he routed them?

06-10-2017, 12:52 AM	#1 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 918 Drives: 2010 370z Nismo Rep Power: 14	Lol^ __________________ Boosted Performance Single Turbo 618whp/489 tq

06-12-2017, 11:49 PM	#13 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3384	Just to provide some more on the heat treatment on everything. My 350z has this identical kit...going on 3 years. I do not have any heat shielding on anything. If the vacuum hoses are ran as per manual, everything goes upwards, and away from the heat. Same goes for all other components... if they are tucked away as per instructions, you should not have issues. I also do not have a turbo blanket, no issues at all for some time now. Now, is it a good preventative measure...absolutely, it does not hurt to have, but it is not a MUST I hope that provides some clarity. I have had customers choose to ceramic coat everything as well, it is completely up to you. I also have heat wrap and turbo blankets in stock for those that choose to go with the heat wrapping of everything. 370Zsteve, GaleForce, elperuano and 1 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GReddy 20G 'Tuner' Twin Turbo Kit \| 450+rwhp @ .4Bar \| Now Taking Orders \| FREE S&H!	AJ@ECSMotorsports	Drivetrain/Engine	57	04-09-2013 10:52 AM
Jp vizage 370z polyurathane lip kit. Taking pre orders	LOU@AMPLIFIED	Body Interior/Exterior	22	09-09-2011 01:41 AM
Taking orders for LED/Angel Eyes Headlights.	Tee's Z	Exterior & Interior	17	08-01-2010 10:46 AM
Forged Distributing Taking Orders	Forged DST	Wheels & Tires	51	10-23-2009 08:37 PM
Dealers Not taking anymore custom orders	YamahaR6	Canada	18	05-20-2009 09:31 PM

06-10-2017, 10:39 PM	#2 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,730 Drives: 09 nissan 370z Sp M6 Rep Power: 295380	Guess I"ll rephrase it. Will you have anymore kits available around September. I'm asking because I'll be placing my order for a billet crankshaft for my build and if the numbers for the stage 2 cam don't pan out to my liking, I want to place a order for this kit.

06-11-2017, 08:28 AM	#6 (permalink)
xdragus Base Member Join Date: Aug 2015 Location: toronto Posts: 47 Drives: '17 PW Nismo Rep Power: 11	Does the kit work with FI tt-tdx or go with the FI regular tdx? Also any problems if I have a FI RHFC installed instead of test pipes? Or does the 3" down pipes remove this part? Besides new clutch, gauges, Csc, and oil coolers. What else would be good to purchase? And for the kit...is that $7980 include or exclude taxes?

06-11-2017, 11:48 AM	#10 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,730 Drives: 09 nissan 370z Sp M6 Rep Power: 295380	Where would 1050cc max out?