Limp Stillen Supercharger dtc p1239

Optimiser · 05-19-2020, 09:36 PM

Quote:

Originally Posted by cgr406

So I installed the Michigan Motorsports TB cable about a week ago & wrapped it in teva tape, just cause it can't hurt. No codes / limp mode so far, but it's only been a week. Tonight i wrapped it in thermal insulation from Summit. So, we'll see how it goes, although now that it's November in PA, not sure how much more I'll be able to drive the car for a while.

It's been a year so how is it now? More reliable?

cgr406 · 05-20-2020, 03:57 PM

Yep, so far so good. Although I've only put about 1,600 mi on it. The original stillen cable was OK for a while too, so I'm not sure this is enough of a test to be conclusive. I probably had about 3.5k mi on the Stillen cable before it started crapping out. Fingers crossed.

vqholic@Korea · 09-27-2020, 10:54 AM

Quote:

Originally Posted by cgr406

Yep, so far so good. Although I've only put about 1,600 mi on it. The original stillen cable was OK for a while too, so I'm not sure this is enough of a test to be conclusive. I probably had about 3.5k mi on the Stillen cable before it started crapping out. Fingers crossed.

I also suffered by p1239. Seeing this thread, Hannes was insulated and passed through the summer without any problems. Now that autumn has come, limp mode is back on, and the fault code represents p1239.
It ran about 3,000 mi. Fucxxxx

Optimiser · 09-27-2020, 09:01 PM

I'm thinking the only way to fix this problem is to use TopGunz new kit (or piping) that utilizes the stock manifold and therefore stock (length) TB wiring harness.

DrBacon · 09-27-2020, 11:17 PM

Quote:

Originally Posted by Optimiser

I'm thinking the only way to fix this problem is to use TopGunz new kit (or piping) that utilizes the stock manifold and therefore stock (length) TB wiring harness.

Would be nice if the extensions were proper length, I had to loop the excess because I didn't know what else to do with it.

Optimiser · 09-27-2020, 11:26 PM

Quote:

Originally Posted by DrBacon

Would be nice if the extensions were proper length, I had to loop the excess because I didn't know what else to do with it.

Same here.

05-20-2020, 03:57 PM	#2 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3368	Yep, so far so good. Although I've only put about 1,600 mi on it. The original stillen cable was OK for a while too, so I'm not sure this is enough of a test to be conclusive. I probably had about 3.5k mi on the Stillen cable before it started crapping out. Fingers crossed. Optimiser likes this. __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

09-27-2020, 09:01 PM	#4 (permalink)
Optimiser Enthusiast Member Join Date: Mar 2013 Location: Australia Posts: 457 Drives: 2012 Nissan 370Z MT Rep Power: 20146	I'm thinking the only way to fix this problem is to use TopGunz new kit (or piping) that utilizes the stock manifold and therefore stock (length) TB wiring harness. Spooler and vqholic@Korea like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P1239 throttle position sensor	ThamerZ370	Tuning	5	12-19-2015 12:47 PM
[WTB] stillen supercharger	mathys92	Parts for sale (Private Classifieds)	0	03-02-2015 08:03 AM
[FOR SALE] Stillen supercharger kit	mr-emv	Parts for sale (Private Classifieds)	11	09-07-2013 11:07 AM
FS: Stillen Supercharger kit	Elysium	Canada	11	03-31-2012 08:05 AM
Stillen or gtm supercharger?	germanattitud	Forced Induction	34	08-07-2011 01:47 PM