At the back of the car ?
Dont think that will help me if I'm broken down on a motorway they most likely will want to drag it on from the front

Sent from my SM-G960F using Tapatalk

Mine rolls either direction

Lol

Sent from my SM-G960F using Tapatalk

Well then its a good thing I am coming out with a Topgun Bash/Tow bar.

Can you do it by friday lol



Sent from my SM-G960F using Tapatalk

The Fast Intentions crash bar works fine with Topgunz's intercooler.

Wait, the removal of the front bumper reinforcement is required for the air to air intercooler installation?

Soho's bar should work as well, and is cheaper than the FI bar by about $150-200 last I checked

Ill be selling these soon.

Correct, although a few guy's have modified it to make it work.

How did you all get that blue silicone coupler on to the supercharger? The only way I can see is having to take off the fender liner

Hi all - ran a boost leak test and I have a leak at my MAF sensors (Uprev GT’s)
The gaskets on there appear to be rubber and look pretty beat and have cracks... any one familiar with part number for replacement?

A good fix for this is grab an o-ring and roll it on to the maf base, it'll seat nicely and make for a good gasket/seal.

anyone have any tips on getting the ypipe to fit better/easier? I've cut a decent sized hole in the radiator support so I know thats not an issue. I struggled for about 30-40 minutes trying to get it to fit

Are you spraying the inside of the silicon couplers w/ Windex? It's a really good lubricant for them. Makes them slide on much better.