Nissan 370Z Forum
Page 174 of 187 « First 74124164172173 174 175176184 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Topgunz - air to air upgrade (http://www.the370z.com/forced-induction/110925-topgunz-air-air-upgrade.html)

TopgunZ 02-07-2019 08:36 PM
Those are great numbers! How is everything working with the gate?

redondoaveb 02-07-2019 09:30 PM
Quote:
Originally Posted by TopgunZ (Post 3822855)
Those are great numbers! How is everything working with the gate?
It couldn't have worked out better.

370zbeast 02-08-2019 03:04 AM
I’m thinking of putting AAM bigger aa intercooler on I have the stage 1 now ,what do y’all think , nows the time to decide

TopgunZ 02-08-2019 06:51 PM
Show 1 piece of data to support that...I'm on board.

espimax 03-03-2019 09:11 PM
Just to confirm this is a G37 friendly kit?

TopgunZ 03-03-2019 09:55 PM
At the moment, it only fits the coupe. However, I'm getting the sedan kit going. Should be ready in a few weeks.

espimax 03-04-2019 06:14 AM
Kit
 
It is a coupe.

TopgunZ 03-04-2019 07:21 AM
Quote:
Originally Posted by espimax (Post 3830578)
It is a coupe.
Your all good then. PM me if you have any questions.

mikey1600 03-05-2019 05:59 AM
Great numbers! what pulleys are you running supercharger side if I may ask? I'm close to going e85 on mine

Quote:
Originally Posted by redondoaveb (Post 3822501)
Here are my 4 different power levels with the wastegate and ebc.
Blue- High boost on e85
Red- Low boost on e85
Green- Boost off on e85
Gold- Boost off on 91 octane

EndlessZ 03-05-2019 01:49 PM
Quote:
Originally Posted by TopgunZ (Post 3830536)
At the moment, it only fits the coupe. However, I'm getting the sedan kit going. Should be ready in a few weeks.
Pm me when you have the kits available. I have a customer who needs one asap.

redondoaveb 03-05-2019 02:17 PM
Quote:
Originally Posted by mikey1600 (Post 3830941)
Great numbers! what pulleys are you running supercharger side if I may ask? I'm close to going e85 on mine
That's with a 3.47 jackshaft and a 3.0 sc pulley.

Pr0uditalian 03-06-2019 12:40 AM
Quick question guys, for this kit what PCV kit would you guys recommend? Or what are you guys running with?

Sent from my SM-N960U using Tapatalk

espimax 03-06-2019 05:58 AM
Who has a E85 complete kit?

TopgunZ 03-06-2019 07:21 AM
Quote:
Originally Posted by EndlessZ (Post 3831147)
Pm me when you have the kits available. I have a customer who needs one asap.
PM sent.

Senna-F1 03-13-2019 03:35 PM
To anyone who has a Stillen boot used for the air filters.

I’m trying to design and print something better. Bigger, maybe support for a second filter somewhere. Don’t know, but since I don’t have the kit installed, I could use the stillen boot as a starting place. I am aware of the other 3D printed setup. Looking to design something different.

Can anyone help?


All times are GMT -5. The time now is 04:19 AM.
Page 174 of 187 « First 74124164172173 174 175176184 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2