BP turbo build/advice

TcRocket · 02-21-2016, 09:28 AM

I guess I really have no desire to see how much vacum I'm making. And if I were to have a vacum leak it would barely Bo noticeable however upon boost it'd leak like a bitch. So I really don't see the reference there. I'm only trying to keep a healthy engine based upon boost pressure not vacum. The boost controller controlling the waste gates will only see positive pressure so why should the gauge controlling the solenoid need to ever see negative pressure. I'd rather see a gauge at zero instead of jumping all over in the negatives. If I don't see a number above approximately 3k then I know I have a line leak issue. Just my .02

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 07:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 09:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 12:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 08:24 AM

02-21-2016, 09:28 AM	#11 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 10	I guess I really have no desire to see how much vacum I'm making. And if I were to have a vacum leak it would barely Bo noticeable however upon boost it'd leak like a bitch. So I really don't see the reference there. I'm only trying to keep a healthy engine based upon boost pressure not vacum. The boost controller controlling the waste gates will only see positive pressure so why should the gauge controlling the solenoid need to ever see negative pressure. I'd rather see a gauge at zero instead of jumping all over in the negatives. If I don't see a number above approximately 3k then I know I have a line leak issue. Just my .02