Congrats Bro!

FYI...the smile when it spoils up never goes away

I actually zoomed in on your fuel pump and I can see where it says the credit parts brand on it so it is the same. I'm already 90% done with my instal only thing left is install and wire up fuel pump and wire up oil pump and she'll be good go to

Sweet numbers man.....Is that on E85 or 93 Pump?

Can anyone tell me how to get a hold of Sasha? I have not been able to successfully contact him through several means of communication I've tried fb, email, PM, this is really starting to suck as my build is sitting in my garage on hold.....

It's on 93 shell gas

Sent from my Nexus 6P using Tapatalk

Thank you sir. And thanks for all the help along the way. Ecutek traction control is amazing too btw :)

Sent from my Nexus 6P using Tapatalk

Ask the question here, some members might have an answer for you. Unless you are waiting for parts.

Hey everyone, I finished my BP install a few weeks ago and have been going back and forth with my tuner. We are moving forward but a small issue that has arose is my short term fuel trim is off about 10% on average from bank to bank. Has anyone ran into this that can point me in a direction? I have checked vacuum hoses, reseated my manifold, etc, etc. Also attached are AFR and 3rd gear pull so I can see what you guys think on if they are looking good. Working with Seb remotely and he is awesome. I am in no way going around him, I just need help with the short term fuel trim issue since he is remote and I have run out of things to check/tighten...

Thanks in advance guys.


https://s32.postimg.org/z3c9tgted/STFT.jpg


https://s31.postimg.org/5z4bkh5cb/AFR.jpg


https://s32.postimg.org/bzpnlnugl/3rd_GEAR.jpg

If all else fails you might need to send your injectors in for flow matching to ensure they are all opening/closing with the signal.

@Jax4557 I had an issue with the initial installation of my injectors weren't seating properly, I had to keep fiddling with it until I finally got it fully seated to the best of my satisfaction, I know you said you rechecked everything but it's just a thought to throw in there.

Also my question is in regards to the base map. Is the base map for the kit pre installed on the uprev or do I still need to get a hold of Sasha to obtain it?

I have had a jumping afr at high rpm ! I am still chasing the demon... I was going to unplug my post cat 02 and start there. Is the short term fuel trim the same thing as a float afr at high rpm? I believe Jwick had the same problem as me. Sasa has been great with the help, the shop on the other hand refused to call him for some reason, so i took the car back and am driving it atm.

https://youtu.be/F6h2javzdAM

Last weekend's fun 1/2 mile racing

Sent from my Nexus 6P using Tapatalk

^^ My god more of that please. I almost gave up trying to buy this kit until I heard that.

https://youtu.be/XCWFNura64g

Here you go. Final dyno pull. 513 whp 417 wtq

Sent from my Nexus 6P using Tapatalk