What's the torque?

Yellow spring 93 390


Sent from my iPhone using Tapatalk

That's pretty aggressive for 7.3lbs of boost. Torque sounds right but that HP is high.

I'm running 510 on 12lbs.

Well I lost about a half quart of oil when the intercooler piping blew off so idk what's Goin on lol


Sent from my iPhone using Tapatalk

Yeah, that seems really high at the 7.5lb spring. I'm at the same hp/tq as J tunes at 12lbs. That really don't seem right how you can be almost the same hp/tq at a little over 1/2 the psi we are running.

YzGyz

[IMG]http://i1159.photobucket.com/albums/...ps6z2mmiqi.jpg[/IMG]

I can't stop drooling...... Love em

http://uploads.tapatalk-cdn.com/2016...b473d4599e.jpg
http://uploads.tapatalk-cdn.com/2016...5fd45efc5c.jpg
http://uploads.tapatalk-cdn.com/2016...800c2823d1.jpg

Any ideas on why the cooler is leaking


Sent from my iPhone using Tapatalk

Did you tighten the AN fittings properly?

Yea I can't muscle them around anymore


Sent from my iPhone using Tapatalk

Hit the gym? =)

Haha I might need to. I'm sure I can fix it. Loving the kit no matter what blips I hit.


Sent from my iPhone using Tapatalk

Hit me up when you get it all done! I am in St Pete and I'd love to check it out! I would have gone BP myself had I not been part of the GTM group buy debacle.

It's all done and tuned. Just leaking a bit. If you have access to a lift I'll come over this weekend


Sent from my iPhone using Tapatalk

hah! I wish! If it makes you feel any better, I changed my oil this weekend and while doing a general inspection I noticed a small oil leak as well... It's eating me up inside as I did not have time to fix it.. so it will remain until next oil change. At least it is in an accessible place!

That might be your problem. You don't want much torque on them. Like a qrt to half turn after snug. The first time I use one I clamp it down and then unscrew it completely and set it again. Sometime you have to knock that anodized coating off it so it'll seal good.