Stage 2 sc build has begun

Jinxx · 07-15-2016, 12:07 PM

Quote:

Originally Posted by theDreamer

88 is what most people want, it gets good boost levels, barely over spins the SC at 7500RPMs.
Questions, Gamma sent me what they think is the bolt that goes from the new engine mount to the chassis but I do not think it is correct. Anyone have the specs on the bolt, at this point I might just go buy one from the hardware store and be done with it?

If I remember right it was just a nut and bolt same size as the stock one .....and I think I used the stock one any way also if my math was correct the 85mm is at 90130 rpm sat 7k and around 95000 at 7.5 k

theDreamer · 07-15-2016, 01:05 PM

Quote:

Originally Posted by Jinxx

If I remember right it was just a nut and bolt same size as the stock one .....and I think I used the stock one any way also if my math was correct the 85mm is at 90130 rpm sat 7k and around 95000 at 7.5 k

The stock one that is in the rubber portion of the engine mount?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 06:04 AM
GTM Stage 1.5 Supercharged Roadster Build	JVerge5363	Forced Induction	26	06-13-2014 11:02 AM
FRYZIA23 GTM stage 1.5 S/C build	fryzia23	Forced Induction	91	01-15-2014 11:20 PM
New GTM stage 2 TT build	Billy02987	Forced Induction	212	06-04-2011 03:56 PM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 10:34 AM