My kit has arrived! WOOOOOP!

Jayhovah · 12-22-2015, 04:47 PM

We are struggling to get the passenger side turbo manifold on. A heat shield covering evap and fuel hard lines hits the manifold. Any ideas? Going to take pics.

Sent from my Nexus 6 using Tapatalk

Jayhovah · 12-22-2015, 05:45 PM

Quote:

Originally Posted by Jayhovah

We are struggling to get the passenger side turbo manifold on. A heat shield covering evap and fuel hard lines hits the manifold. Any ideas? Going to take pics.

Sent from my Nexus 6 using Tapatalk

Solved. There is a fuel line and shielding mod THIRTY PAGES LATER in the instructions that should have put in right after tear down. It's pretty clear to me that different techs wrote different sections of the manual and they were assembled together without a ton of thought.

Jayhovah · 12-22-2015, 06:35 PM

Quote:

Originally Posted by Jayhovah

Solved. There is a fuel line and shielding mod THIRTY PAGES LATER in the instructions that should have put in right after tear down. It's pretty clear to me that different techs wrote different sections of the manual and they were assembled together without a ton of thought.

Not solved. The shield we replace covers a fuel line and an evap line. The fuel line gets extended and the shield is replaced, but the pictures show the evap line just disconnected. Are we supposed to leave it that way?

I've uploaded the instructions to my google drive, here is the link:
https://drive.google.com/file/d/0B9s...ew?usp=sharing

The procedure in question is on page 77. On the other kits does the evap hose just get left unconnected?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new Z arrived.	NS370Z	New 370Z Owner	13	06-23-2012 05:54 PM
It Has Arrived...	Alstann	New 370Z Owner	6	01-14-2012 08:46 PM
My Z has arrived!	Z_ealot	New 370Z Owner	26	08-17-2011 07:43 PM
She arrived!	Gixxer2k4	Introduction	13	12-23-2010 12:51 AM
My Z Has Arrived!	370er	Australia/New Zealand	14	10-01-2009 09:33 PM