Nissan 370Z Forum  

Stillen air to air conversion fabrication thread

I asked this on myG37.com, but I figured I would pose it here, as well, since this thread seemed to have the best and most information: "What is the difference

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree147Likes

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-18-2016, 08:38 PM   #34 (permalink)
Base Member
 
Join Date: Jun 2015
Location: New Orleans
Posts: 41
Drives: 11 G37S
Rep Power: 11
omG37S is on a distinguished road
Default

I asked this on myG37.com, but I figured I would pose it here, as well, since this thread seemed to have the best and most information:

"What is the difference between the 370Z kit and the G37 coupe RWD kit? I found a great deal for one locally. Guy blew his engine from running the 10lb pulley with upgraded impeller with too small of injectors (GT-R injectors.) He has the 8lb, 9lb, and 10lb pulley included. He is also throwing in the trans cooler.

I intend to buy the FrozenBoost intercooler, 750cc injectors, 340lhp pump, GT-R spark plugs, Gator belt(s), and possibly the lightweight pulley for my initial install. I already have UpRev, so I will stick with that until the A2A kit has more time and is improved more, then I'll switch the EcuTek. Also will take off my hfc, and put back on the stock cats. I have 275 tires in rear, which only have about 3k miles on them, so I'll wait until I go A2A, or the tires are bald, before moving up to 305 (if they fit in my well -- 20x10.5 +35, dropped on coilovers) but no less than 295.

My initial goal was 500+whp, but I am going to remain realistic, and ~420whp will have to suffice until I go A2A.

Do I need to do the valve body upgrade right away, or wait until I go over 500whp? Also, I wanted a csf radiator, but don't believe they make one for the automatic. Any suggestions?

Any answers, help, advice, links would be greatly appreciated."
omG37S is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Starting carbon fiber fabrication, questions Gauge Exterior & Interior 15 08-10-2012 07:44 AM
DIY: Custom License Plate LED Fabrication tbonesteak DIY Section (Do-It-Yourself) 31 05-16-2012 08:05 PM
metal fabrication. jayl Mid-Atlantic Region 9 04-25-2012 09:55 AM
Another Stillen SC thread! weiboy718 Forced Induction 106 01-11-2011 01:27 AM


All times are GMT -5. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2