OFFICIAL Boosted Video Thread...Please you're my only hope

BOLIO 671 · 10-14-2016, 05:23 AM

Quote:

Originally Posted by GeauxTigers1

RRTC is traction control I think, but I didn't know ecutek has the ability to add the brake and throttle feature for burnouts!!? Was that just a tuning thing or something you had to purchase equipment wise as well? I believe Hojin actually purchased something for that.

No...nothing additional....It can be programmed into your Map. It's referred to as a Throttle Hijack. This is how the guys at Fast Intentions are able to do a stand burnout at the 1/4 mile prior to staging.

Here's a short vid of the Throttle Hijack enabled via EcuTek. I had this done after my run with the GTR. Big thanks to Seb at Specialty Z. I shot him an email after my runs the night I raced the GTR regarding my issues of properly doing a stand burnout in order to warm up my drag radials. As you can see during my GTR burnout I could not do a standing burnout due to the ECU killing the throttle once it sensed the brake pedal. I also tried pulling the brake fuse like others had suggested but that didn't get me anywhere either as I ended up with the same issue of power to the motor being cut everytime I applied the brake. Seb responded back with the Throttle Hijack option as a solution. Here's a vid of it enabled into one of my maps.

GeauxTigers1 · 10-24-2016, 12:35 AM

Quote:

Originally Posted by BOLIO 671

No...nothing additional....It can be programmed into your Map. It's referred to as a Throttle Hijack. This is how the guys at Fast Intentions are able to do a stand burnout at the 1/4 mile prior to staging.

Here's a short vid of the Throttle Hijack enabled via EcuTek. I had this done after my run with the GTR. Big thanks to Seb at Specialty Z. I shot him an email after my runs the night I raced the GTR regarding my issues of properly doing a stand burnout in order to warm up my drag radials. As you can see during my GTR burnout I could not do a standing burnout due to the ECU killing the throttle once it sensed the brake pedal. I also tried pulling the brake fuse like others had suggested but that didn't get me anywhere either as I ended up with the same issue of power to the motor being cut everytime I applied the brake. Seb responded back with the Throttle Hijack option as a solution. Here's a vid of it enabled into one of my maps.

VERY nice dude! So this is essentially another option other than the line lock. Did you have to add any sort of mod or just an update from Ecutek?

BOLIO 671 · 10-25-2016, 02:49 AM

Quote:

Originally Posted by GeauxTigers1

VERY nice dude! So this is essentially another option other than the line lock. Did you have to add any sort of mod or just an update from Ecutek?

Just an update. All u need to do is get with ur tuner and have them enable the throttle Hijack into ur maps

GeauxTigers1 · 11-28-2016, 10:32 PM

Quote:

Originally Posted by BOLIO 671

Just an update. All u need to do is get with ur tuner and have them enable the throttle Hijack into ur maps

aaaand here comes the call to my tuner! LOL Ty sir! repped!

GeauxTigers1 · 11-28-2016, 10:35 PM

Can't believe I forgot to post this! Had an absolutely blast at NoFlyZone on the 1/2 mile airstrip:

^why does the forum not create the thumbnail anymore

jax4557 · 11-30-2016, 01:24 AM

I figured I would share some videos until I get her back on the road. All video filmed in Mexico and no racing involved.

BP Kit with precision 6766 1.15AR
1150cc injectors
cjm-s1-e fuel return kit
E85 flex fuel sensor
Ecutek
13 PSI on E85
hp/tq unknown as I didn't hit dyno ( Any guesses? )

30 to 140 mph pull while logging for tuner

Seeing how my new RE11's worked with TC completely disabled...

Testing ecutek launch control and traction control

A quick pull after installation with only 8psi wastegate pressure and open dumps before installing recirculation tubes.

Just playing around to catch spool and open dump noise. I miss it and may put dumps back on..

solidus · 11-30-2016, 07:30 AM

Quote:

Originally Posted by jax4557

I figured I would share some videos until I get her back on the road. All video filmed in Mexico and no racing involved.

BP Kit with precision 6766 1.15AR
1150cc injectors
cjm-s1-e fuel return kit
E85 flex fuel sensor
Ecutek
13 PSI on E85
hp/tq unknown as I didn't hit dyno ( Any guesses? )

30 to 140 mph pull while logging for tuner

Seeing how my new RE11's worked with TC completely disabled...

Testing ecutek launch control and traction control

A quick pull after installation with only 8psi wastegate pressure and open dumps before installing recirculation tubes.

Just playing around to catch spool and open dump noise. I miss it and may put dumps back on..

Those are some nice gauges you got there.

xnick101 · 11-30-2016, 09:33 PM

Quote:

Originally Posted by jax4557

I figured I would share some videos until I get her back on the road. All video filmed in Mexico and no racing involved.

BP Kit with precision 6766 1.15AR
1150cc injectors
cjm-s1-e fuel return kit
E85 flex fuel sensor
Ecutek
13 PSI on E85
hp/tq unknown as I didn't hit dyno ( Any guesses? )

who tuned the car?

jax4557 · 11-30-2016, 10:42 PM

Quote:

Originally Posted by solidus

Those are some nice gauges you got there.

You know what, I actually got a hell of a deal on them and man do they look sweet. The sucker who sold them is probably regretting it so bad...

+1 for second guessing

jax4557 · 11-30-2016, 10:45 PM

Quote:

Originally Posted by xnick101

who tuned the car?

Seb with specialty Z did the remote tune on it. I have flex fuel, speed density, AFR and overboost protection, launch control, throttle hijack, and the list goes on. I recommend him hands down.

squid267 · 12-01-2016, 01:48 PM

Quote:

Originally Posted by jax4557

Seb with specialty Z did the remote tune on it. I have flex fuel, speed density, AFR and overboost protection, launch control, throttle hijack, and the list goes on. I recommend him hands down.

what kit you got!?

sounds sick man

edit: missed where you said you have bp kit

jax4557 · 12-01-2016, 03:24 PM

Quote:

Originally Posted by squid267

what kit you got!?

sounds sick man

edit: missed where you said you have bp kit

Yeah its the BP kit with a precision 6766 and I have the recirculation pipes and also dumps for when I want to go dirtnastyloud....

blueranger · 12-08-2016, 09:09 PM

Thanks for your AZ hospitality Ryan

https://www.youtube.com/watch?v=6AtMDGsCing

1cleanZ · 12-09-2016, 01:25 PM

Quote:

Originally Posted by blueranger

Thanks for your AZ hospitality Ryan

https://www.youtube.com/watch?v=6AtMDGsCing

10.9? Hella nice pass! Just shitty being lined up against that vette, ish!

blueranger · 12-09-2016, 02:16 PM

Quote:

Originally Posted by 1cleanZ

10.9? Hella nice pass! Just shitty being lined up against that vette, ish!

Yeah that ZR1 was a Beast... Check out our times (his 60ft is a dream for me).

Sent from my iPhone using Tapatalk

11-28-2016, 10:35 PM	#125 (permalink)
GeauxTigers1 Track Member Join Date: Nov 2011 Location: Surprise, Az Posts: 590 Drives: 2017 370Z Nismo Rep Power: 6745	Can't believe I forgot to post this! Had an absolutely blast at NoFlyZone on the 1/2 mile airstrip: ^why does the forum not create the thumbnail anymore VQStryker, Hotrodz, YzGyz and 2 others like this. __________________ Fast Intentions Kit Stage 2 #076 2017 Twin Turbo 370z Nismo. JMS Built Block, Closed Deck 874whp, 803lbs Tq e85 Ecutek Tune Last edited by GeauxTigers1; 11-29-2016 at 09:37 PM.

11-30-2016, 01:24 AM	#126 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 11	I figured I would share some videos until I get her back on the road. All video filmed in Mexico and no racing involved. BP Kit with precision 6766 1.15AR 1150cc injectors cjm-s1-e fuel return kit E85 flex fuel sensor Ecutek 13 PSI on E85 hp/tq unknown as I didn't hit dyno ( Any guesses? ) 30 to 140 mph pull while logging for tuner Seeing how my new RE11's worked with TC completely disabled... Testing ecutek launch control and traction control A quick pull after installation with only 8psi wastegate pressure and open dumps before installing recirculation tubes. Just playing around to catch spool and open dump noise. I miss it and may put dumps back on.. phunk, GeauxTigers1, YzGyz and 3 others like this.

12-08-2016, 09:09 PM	#133 (permalink)
blueranger Track Member Join Date: Aug 2012 Location: Albuquerque NM Posts: 577 Drives: 2010 Roadster 7AT Rep Power: 307	10 second club pass (10.92et 133mph) Thanks for your AZ hospitality Ryan https://www.youtube.com/watch?v=6AtMDGsCing GeauxTigers1, Hotrodz and YzGyz like this. __________________ F.I. Stage 1 Twin Turbo #48 \| E85 FlexFuel \| Built 7AT \| F.I. 34 Row Oil Cooler \| F.I. Flex Plate \| F.I. 19 row Trans Cooler \| MT ET Street S/S \| ECUTEK Tuned by Seb \| RPM Roll Bar Last edited by blueranger; 12-08-2016 at 09:12 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Joepro's Boosted Performance build thread!	Joepro	Member's 370Z Gallery	82	04-16-2014 11:09 AM
Vossen Official Vehicle Photoshoot \| Video thread (non Z)	mike@vossen	Other Vehicles	321	08-13-2013 11:19 AM
The official: oops i started a "Steering lock recall!!!" Thread; thread	AWSneer	Nissan 370Z General Discussions	31	06-04-2013 10:23 PM
▀▄ OFFICIAL ARK Performance Exhaust Picture/Video Thread!	TeamARK	Nissan 370Z Photos / Spyshots / Video / Media Gallery	2	12-04-2012 05:43 PM
Huck's Official Awesome Video Clip Thread	Huck	The Lounge (Off Topic)	5	03-23-2012 11:03 PM