Stillen Air to Air setup

JWillis72 · 12-30-2015, 04:38 PM

I just drove the car home so I can change the pipe over the weekend. New pipe will be here tomorrow.

Sent from my iPhone using Tapatalk

JWillis72 · 01-01-2016, 01:55 PM

I need help, while changing the y pipe I just noticed one of the o rings has a cut in it and Nissan is telling me I have to buy a new MAF to get one. Anyone know wher I can get a replacement one?

EliteXpress · 01-01-2016, 03:15 PM

Try a car junkyard.

JWillis72 · 01-01-2016, 03:56 PM

Good idea!

Sent from my iPhone using Tapatalk

need4speed255 · 01-01-2016, 05:46 PM

A good autoparts store such as Napa, a hydraulic cylinder rebuild shop, or maybe even online if you can get measurements of the o-ring.

Is this o-ring round or a shaped o-ring?

JWillis72 · 01-01-2016, 06:16 PM

No, its a rectangle. the parts stores all say I have to buy a MAF.

TopgunZ · 01-01-2016, 06:21 PM

Shaped. Buy a used maf off ebay. I bought 2 for $12

JWillis72 · 01-01-2016, 08:03 PM

Quote:

Originally Posted by TopgunZ

Shaped. Buy a used maf off ebay. I bought 2 for $12

As always, your the man! Thank you.

Sent from my iPhone using Tapatalk

TopgunZ · 01-01-2016, 08:40 PM

Let me know if you can't find what you need. I'll find my old purchase.

RadioFlyer · 01-01-2016, 09:47 PM

Absolute last resort, you could use a silicone gasket maker, but I'd be weary of stuff messing with the MAF. I'd try a junkyard or ebay before I tried silicone.

JWillis72 · 01-02-2016, 02:58 PM

I found one from someone in the local Z group and the new y pipe is in the car, hopefully that fixed it.

BOLIO 671 · 01-03-2016, 07:57 AM

$#! T....keeping our fingers crossed

JWillis72 · 01-04-2016, 04:49 PM

MAF leaks are gone we but can hear a hiss from the valve covers, I'm guessing its blowing by the rings a little. Today was the first day the shop has been open since Christmas Eve so the place is full of people and we couldn't strap it to the dyno, I'm waiting to hear back when the tuner is available and when we can try it again.

Spooler · 01-04-2016, 06:44 PM

Quote:

Originally Posted by JWillis72

MAF leaks are gone we but can hear a hiss from the valve covers, I'm guessing its blowing by the rings a little. Today was the first day the shop has been open since Christmas Eve so the place is full of people and we couldn't strap it to the dyno, I'm waiting to hear back when the tuner is available and when we can try it again.

One of your exhaust valves is not fully closed. I wouldn't worry about that.

JWillis72 · 01-04-2016, 07:05 PM

Not disagreeing but I don't understand, how wound an exhaust valve leak out the valve cover?

Sent from my iPhone using Tapatalk

12-30-2015, 04:38 PM	#1036 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I just drove the car home so I can change the pipe over the weekend. New pipe will be here tomorrow. Sent from my iPhone using Tapatalk jpritche, ANMVQ and StillenZ84 like this.

01-01-2016, 06:21 PM	#1042 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Shaped. Buy a used maf off ebay. I bought 2 for $12 JWillis72 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 01-01-2016 at 06:23 PM.

01-01-2016, 08:40 PM	#1044 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Let me know if you can't find what you need. I'll find my old purchase. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-02-2016, 02:58 PM	#1046 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I found one from someone in the local Z group and the new y pipe is in the car, hopefully that fixed it. BOLIO 671, jpritche, swiss370Z and 2 others like this.

01-03-2016, 07:57 AM	#1047 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	$#! T....keeping our fingers crossed __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

01-01-2016, 01:55 PM	#1037 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I need help, while changing the y pipe I just noticed one of the o rings has a cut in it and Nissan is telling me I have to buy a new MAF to get one. Anyone know wher I can get a replacement one?

01-01-2016, 03:15 PM	#1038 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 10	Try a car junkyard.

01-01-2016, 03:56 PM	#1039 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Good idea! Sent from my iPhone using Tapatalk

01-01-2016, 05:46 PM	#1040 (permalink)
need4speed255 Enthusiast Member Join Date: Oct 2014 Location: Indiana Posts: 262 Drives: 15Nsmo/99 EclipseGST Rep Power: 10	A good autoparts store such as Napa, a hydraulic cylinder rebuild shop, or maybe even online if you can get measurements of the o-ring. Is this o-ring round or a shaped o-ring?

01-01-2016, 06:16 PM	#1041 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	No, its a rectangle. the parts stores all say I have to buy a MAF.

01-01-2016, 09:47 PM	#1045 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 39	Absolute last resort, you could use a silicone gasket maker, but I'd be weary of stuff messing with the MAF. I'd try a junkyard or ebay before I tried silicone.

01-04-2016, 04:49 PM	#1048 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	MAF leaks are gone we but can hear a hiss from the valve covers, I'm guessing its blowing by the rings a little. Today was the first day the shop has been open since Christmas Eve so the place is full of people and we couldn't strap it to the dyno, I'm waiting to hear back when the tuner is available and when we can try it again.

01-04-2016, 07:05 PM	#1050 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Not disagreeing but I don't understand, how wound an exhaust valve leak out the valve cover? Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM