Stillen Air to Air setup

JWillis72 · 01-09-2016, 01:02 PM

The tune so far has only been F/A adjustments, some time today the tuner is going to send us a flash with some timing advance do see what it does.

Elmo370z · 01-09-2016, 01:37 PM

Quote:

Originally Posted by JWillis72

The tune so far has only been F/A adjustments, some time today the tuner is going to send us a flash with some timing advance do see what it does.

Is Harry tuning your car?

JWillis72 · 01-09-2016, 02:27 PM

No, I really like Harry but I wanted the traction control options ecutek has and he only does UpRev.

Sent from my iPhone using Tapatalk

Elmo370z · 01-09-2016, 08:57 PM

Quote:

Originally Posted by JWillis72

No, I really like Harry but I wanted the traction control options ecutek has and he only does UpRev.

Sent from my iPhone using Tapatalk

Where did you go fior ecu tek

TopgunZ · 01-09-2016, 07:13 PM

The timing won't gain psi. There's something else. If it were me there I would 100% no doubt put the Bosch bpv on and throw down a pull. That new spring could easily be a problem.

JWillis72 · 01-09-2016, 07:18 PM

Quote:

Originally Posted by TopgunZ

The timing won't gain psi. There's something else. If it were me there I would 100% no doubt put the Bosch bpv on and throw down a pull. That new spring could easily be a problem.

The one off the stillen kit?

TopgunZ · 01-09-2016, 09:17 PM

Yes. It will hold up to 11psi. It takes about 30 seconds to swap it on and try at least.

JWillis72 · 01-09-2016, 09:45 PM

We will have to try that , thanks again!

Sent from my iPhone using Tapatalk

ANMVQ · 01-11-2016, 11:20 AM

Better but what PSI are you aiming for 12?

JWillis72 · 01-11-2016, 01:31 PM

Not 100% sure, with all the changes it should have been around 12 but that's going to drop because of the headers but we don't know how much. I just took of the BOV and installed the BPV on it but the tuning laptop isn't opening so it stopping us from running it right now.

.

Sent from my iPhone using Tapatalk

Jayhovah · 01-11-2016, 01:37 PM

Quote:

Originally Posted by JWillis72

...but the tuning laptop isn't opening so it stopping us from running it right now.

Your build is finding new and creative ways to stay unresolved. I'm keeping my fingers and toes crossed for you!

JWillis72 · 01-11-2016, 01:57 PM

I'm telling you this car is cursed!

Sent from my iPhone using Tapatalk

TopgunZ · 01-11-2016, 02:07 PM

Really hope that was the psi problem. Report back when you get it up and running.

JWillis72 · 01-11-2016, 02:12 PM

I will even if I have to buy the shop a laptop! This Fn car is going to make power one way or another! I don't have much of a choice, my wife didn't buy my sales pitch for a C7 this weekend!

Sent from my iPhone using Tapatalk

StillenZ84 · 01-11-2016, 02:16 PM

Quote:

Originally Posted by JWillis72

I will even if I have to buy the shop a laptop! This Fn car is going to make power one way or another! I don't have much of a choice, my wife didn't buy my sales pitch for a C7 this weekend!

Sent from my iPhone using Tapatalk

Hahaha! Never hurts to try!

01-09-2016, 07:13 PM	#5 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	The timing won't gain psi. There's something else. If it were me there I would 100% no doubt put the Bosch bpv on and throw down a pull. That new spring could easily be a problem. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-09-2016, 09:17 PM	#7 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Yes. It will hold up to 11psi. It takes about 30 seconds to swap it on and try at least. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 01-09-2016 at 09:19 PM.

01-11-2016, 11:20 AM	#9 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Better but what PSI are you aiming for 12? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-11-2016, 01:31 PM	#10 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup Not 100% sure, with all the changes it should have been around 12 but that's going to drop because of the headers but we don't know how much. I just took of the BOV and installed the BPV on it but the tuning laptop isn't opening so it stopping us from running it right now. . Sent from my iPhone using Tapatalk

01-11-2016, 02:07 PM	#13 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Really hope that was the psi problem. Report back when you get it up and running. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-09-2016, 01:02 PM	#1 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	The tune so far has only been F/A adjustments, some time today the tuner is going to send us a flash with some timing advance do see what it does.

01-09-2016, 02:27 PM	#3 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	No, I really like Harry but I wanted the traction control options ecutek has and he only does UpRev. Sent from my iPhone using Tapatalk

01-09-2016, 09:45 PM	#8 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	We will have to try that , thanks again! Sent from my iPhone using Tapatalk

01-11-2016, 01:57 PM	#12 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I'm telling you this car is cursed! Sent from my iPhone using Tapatalk

01-11-2016, 02:12 PM	#14 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I will even if I have to buy the shop a laptop! This Fn car is going to make power one way or another! I don't have much of a choice, my wife didn't buy my sales pitch for a C7 this weekend! Sent from my iPhone using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM