Replaced my factory Gauges!

Aviator44 · 10-21-2014, 11:24 PM

Quote:

Originally Posted by 370zrider

Is that an Air/Fuel gauge (with 7.4) ?

The Innovate defaults to 7.4 on start up, there's a lose connection, or the sensor is not plugged in. Mine reads 7.4 for a minute or so in the mornings when I first turn the car on.

Quote:

Originally Posted by chops

how come you went with an AFR gauge? going FI? btw, we have factory wideband sensors iirc if you tap into ODB

The factory wideband sensors are not as quick or accurate as aftermarket. If you want to just hook up an OBD on an N/A car then there's really no harm. If going FI, you don't use them.

Gregor12 · 10-22-2014, 12:24 AM

Quote:

Originally Posted by Aviator44

The Innovate defaults to 7.4 on start up, there's a lose connection, or the sensor is not plugged in. Mine reads 7.4 for a minute or so in the mornings when I first turn the car on.

The factory wideband sensors are not as quick or accurate as aftermarket. If you want to just hook up an OBD on an N/A car then there's really no harm. If going FI, you don't use them.

Yessir. The sensor was not in at the time. The gauge flashes at 7.4 while it warms the sensor up and then it will begin to read once it is ready!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What gets replaced with new transmission?	Cmike2780	Engine & Drivetrain	14	08-16-2015 09:55 PM
CSC needs to be replaced again anything else i should do?	luigi90210	Engine & Drivetrain	10	02-08-2014 05:17 PM
Replaced Radio	phillip2010Z	Exterior & Interior	4	04-01-2012 05:46 PM
replaced odometer	Volcom370Z	Exterior & Interior	37	04-02-2010 10:51 AM
Replaced tires on SUV and...	PapoZalsa	The Lounge (Off Topic)	3	12-22-2009 10:16 AM