EVO-R 370Z Rear Diffuser

EVOR · 11-04-2009, 09:15 PM

Quote:

Originally Posted by NewYorkJon34

in the picture from sema, why does it seem to not sit flush against the body, it kinda looks cheap. Could it just be the angle of the picture?

Cuz We got them in last minutes. On the top section you need screw from inner bumper to the diffuser. Did not have enough time to do it. So just double side tape which is not enough to hold it. This is very nice carbon piece. I'll post more pics.

NewYorkJon34 · 11-04-2009, 09:46 PM

So it does sit more flush against the body? I'm glad to hear that, def get some pics of how it "should" fit

EVOR · 11-04-2009, 10:58 PM

not fully push on aar SEMA photo

NewYorkJon34 · 11-04-2009, 11:04 PM

Quote:

Originally Posted by EVOR

not fully push on aar SEMA photo

But it sits more flush then that right?

EVOR · 11-05-2009, 02:36 AM

Yes, cuz top part is not screw in to hold.

alexpila · 11-05-2009, 02:42 AM

So how is it going to be secured with a screw to the bumper???? Does it require damaging the stock body work?

EVOR · 11-05-2009, 05:38 AM

Quote:

Originally Posted by alexpila

So how is it going to be secured with a screw to the bumper???? Does it require damaging the stock body work?

You will need to drill through the stock bumper.

alexpila · 11-05-2009, 06:23 AM

Quote:

Originally Posted by EVOR

You will need to drill through the stock bumper.

i will never do that!! i dunno now if im gonna buy it...

EVOR · 11-05-2009, 07:55 AM

I guess its up to if you going to keep this cover for good. I bet by the time you decided to go with different look, new kit with full bumper replacement will be out.

NewYorkJon34 · 11-05-2009, 08:03 AM

Will it be drilled in underneath the bumper with the top part held on by tape? If so I don't think it would be that bad since you would not see any holes if decided to take it off.

280z/300zx · 11-05-2009, 04:44 PM

Can we get a step by step instruction of install with pics so that those of concerned about damaging the stock bumper can see how this thing is installed and secured? Thanks

simota1 · 11-05-2009, 05:48 PM

god that **** is sooo sexy.... drool...

antennahead · 11-05-2009, 09:28 PM

I have saved the bottom picture and blown it up to look more closely at this diffuser. The glossy clearcoat is reflecting the silver color of the bumper across the rounded top edge of the diffuser. The fit looks flush actually, but this "reflection" gives the appearance of more bumper showing than actually is. Save the attached pic, enlarge it yourself and see what I am talking about. It is easy to see the reflection at the right and left edge of the diffuser as it fades off.

cvega · 11-06-2009, 12:08 AM

i actually really lilke this piece. I blew it up and took a look still hard to see but it already looks nice to me...

evo-r: i'll be looking for a package of this c/f rear diffuser, c/f fangs and the c/f upper bumper piece where the license plate screws into...

simota1 · 11-06-2009, 02:28 AM

man i really didnt wana start carbon fibering my z but this set up looks soooo freaking sexy ugh....

11-04-2009, 10:58 PM	#138 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	not fully push on aar SEMA photo __________________ WWW.EVO-R.NET

11-05-2009, 02:36 AM	#140 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	Yes, cuz top part is not screw in to hold. __________________ WWW.EVO-R.NET

11-05-2009, 02:42 AM	#141 (permalink)
alexpila Base Member Join Date: Sep 2009 Location: Johannesburg Posts: 178 Drives: 09 370z AT Touring Rep Power: 15	So how is it going to be secured with a screw to the bumper???? Does it require damaging the stock body work? __________________ 09 7AT Touring 370z, Pearl White, Evo-R Carbon Fang Cover, Carbon Top Cover, HKS Centre Pipe, Illuminated Kickplates, Custom Sprayed stock RAYS

11-05-2009, 07:55 AM	#144 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	I guess its up to if you going to keep this cover for good. I bet by the time you decided to go with different look, new kit with full bumper replacement will be out. __________________ WWW.EVO-R.NET

11-05-2009, 05:48 PM	#147 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	god that ** is sooo sexy.... drool... __________________ TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/**

11-04-2009, 09:46 PM	#137 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	So it does sit more flush against the body? I'm glad to hear that, def get some pics of how it "should" fit

11-05-2009, 08:03 AM	#145 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Will it be drilled in underneath the bumper with the top part held on by tape? If so I don't think it would be that bad since you would not see any holes if decided to take it off.

11-05-2009, 04:44 PM	#146 (permalink)
280z/300zx Track Member Join Date: Feb 2009 Location: Nevada Posts: 689 Drives: 280z, 300zx, Vette Rep Power: 272	Can we get a step by step instruction of install with pics so that those of concerned about damaging the stock bumper can see how this thing is installed and secured? Thanks

11-06-2009, 12:08 AM	#149 (permalink)
cvega Base Member Join Date: Jul 2009 Location: BoStOn Posts: 128 Drives: 2012 Nismo 370z Rep Power: 15	i actually really lilke this piece. I blew it up and took a look still hard to see but it already looks nice to me... evo-r: i'll be looking for a package of this c/f rear diffuser, c/f fangs and the c/f upper bumper piece where the license plate screws into...

11-06-2009, 02:28 AM	#150 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	man i really didnt wana start carbon fibering my z but this set up looks soooo freaking sexy ugh.... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil change, Jack stands or ramps with diffuser?	spearfish25	Nissan 370Z General Discussions	31	08-10-2010 08:38 PM
Name this rear diffuser!	JoeD	Exterior & Interior	13	05-22-2010 07:45 PM
rear diffuser	jrmlk	Exterior & Interior	5	08-20-2009 09:58 PM
k40 calibre laser diffuser and detector.	dahbour	The Lounge (Off Topic)	2	08-17-2009 03:16 PM
Rear Diffuser 370Z	355890	Exterior & Interior	9	07-01-2009 08:17 PM