2015 Nismo Bumper on 2009 Sport possible?

cooltoy · 03-26-2015, 04:06 PM

Or leave the holes open (as most have done) or shave/fill them in as per brucelidat. or fab your own DRL's.

Asheth · 03-27-2015, 10:40 AM

Progressing along

FairladyZ10PG · 04-02-2015, 02:04 PM

Quote:

Originally Posted by Asheth

Progressing along

Progressing too slowly if you ask me.

carlitos_370z · 03-27-2015, 02:08 PM

want to see more

speedfreek · 03-27-2015, 04:02 PM

Can you install this bumper with the Zspeed undershroud?

DIGItonium · 04-02-2015, 01:02 PM

Anyone mechanically inclined and access to a 3D printer? Perhaps one can create a mold that can be bolted onto the bumper, but also be able to rig one of these up:
X.DRL - LED Lighting From The Retrofit Source

That's what I would do if I wanted to install DRLs. Bleh, but hey it's cheaper than the OEM ones.

Asheth · 04-08-2015, 05:29 PM

All done

More pics in the link

Asheth's 09 370z 2015 Nismo Conversion

cooltoy · 04-08-2015, 06:31 PM

Quote:

Originally Posted by Asheth

All done

More pics in the link

Asheth's 09 370z 2015 Nismo Conversion

Are you sure that is not photoshopped? Looks a lot like what I did.

Asheth · 04-08-2015, 06:50 PM

Quote:

Originally Posted by cooltoy

Are you sure that is not photoshopped? Looks a lot like what I did.

Haha I know lol!! You were a big big part in helping me decide how I wanted to go about putting this all together! Thanks a ton! Now I need to order a duckbill spoiler I think. I'm thinking about the Carbon Signal Type N as it doesn't come up as high as the aerojacket.

Japanjay · 04-08-2015, 06:27 PM

Any way someone can list off the full OEM part# list everything needed?

LostSol · 05-23-2015, 10:52 AM

Quote:

Originally Posted by speedfreek

Can you install this bumper with the Zspeed undershroud?

Quote:

Originally Posted by Japanjay

Any way someone can list off the full OEM part# list everything needed?

OK so I hit a deer on my way back from Zdayz and am looking to do the front bumper conversion as long as my body shop plays ball (insurance quoted me $1100 so that should be plenty to cover this).

Can anyone confirm if it will fit with the zspeed undershroud (which I have and would like to keep)?

Also heres the parts list im looking at:

FBM22-6GA0H Front bumper $380
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10

Total: $468

Am I missing anything?

zefaulter · 05-23-2015, 01:38 PM

Quote:

Originally Posted by LostSol

OK so I hit a deer on my way back from Zdayz and am looking to do the front bumper conversion as long as my body shop plays ball (insurance quoted me $1100 so that should be plenty to cover this).

Can anyone confirm if it will fit with the zspeed undershroud (which I have and would like to keep)?

Also heres the parts list im looking at:

FBM22-6GA0H Front bumper $380
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10

Total: $468

Am I missing anything?

LEDs?

Asheth · 05-23-2015, 08:20 PM

Quote:

Originally Posted by LostSol

OK so I hit a deer on my way back from Zdayz and am looking to do the front bumper conversion as long as my body shop plays ball (insurance quoted me $1100 so that should be plenty to cover this).

Can anyone confirm if it will fit with the zspeed undershroud (which I have and would like to keep)?

Also heres the parts list im looking at:

FBM22-6GA0H Front bumper $380
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10

Total: $468

Am I missing anything?

Yea Zspeed will work get the non-nismo one. I have mine sitting in a box will be going on Thursday. Zspeed sent me everything I need for it to fit perfect with the 15 front, but you can get it to work without the extras.

Your list looks like you are missing the 15 fender liners. They come down farther and extend out a little closer to the edge of the bumper.

LostSol · 05-23-2015, 09:00 PM

Quote:

Originally Posted by Asheth

Yea Zspeed will work get the non-nismo one. I have mine sitting in a box will be going on Thursday. Zspeed sent me everything I need for it to fit perfect with the 15 front, but you can get it to work without the extras.

Your list looks like you are missing the 15 fender liners. They come down farther and extend out a little closer to the edge of the bumper.

I was under the understanding that we didnt need new fender liners, just the extenders, which i have the part numbers listed. Is that not correct?

Asheth · 05-23-2015, 10:33 PM

Quote:

Originally Posted by LostSol

I was under the understanding that we didnt need new fender liners, just the extenders, which i have the part numbers listed. Is that not correct?

It's could be possible I didn't try with the old oem fender liners. I do know that the new ones extend down farther and there is less gap. I am still waiting for my extenders to come in my Nissan dealership just sent them out to me yesterday so waiting for them to get here. I'll post back when I get them with pics.

Edit: looking at the pics Azyd posted http://www.the370z.com/nissan-370z-g...ml#post2973034 It looks like the difference is minimal between the two. So the extenders probably could work with the old liners.

03-26-2015, 04:06 PM	#1 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243724	Or leave the holes open (as most have done) or shave/fill them in as per brucelidat. or fab your own DRL's. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

03-27-2015, 10:40 AM	#2 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 19	Progressing along __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

03-27-2015, 04:02 PM	#5 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 20	Can you install this bumper with the Zspeed undershroud? __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

04-02-2015, 01:02 PM	#6 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 44	Anyone mechanically inclined and access to a 3D printer? Perhaps one can create a mold that can be bolted onto the bumper, but also be able to rig one of these up: X.DRL - LED Lighting From The Retrofit Source That's what I would do if I wanted to install DRLs. Bleh, but hey it's cheaper than the OEM ones. __________________

04-08-2015, 05:29 PM	#7 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 19	All done More pics in the link Asheth's 09 370z 2015 Nismo Conversion __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

03-27-2015, 02:08 PM	#4 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7587	want to see more

04-08-2015, 06:27 PM	#10 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 16	Any way someone can list off the full OEM part# list everything needed?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 2015 front bumper	jewnbug	Parts for sale (Private Classifieds)	23	09-09-2015 07:29 PM
[FOR SALE] 2009/2012 Nismo front bumper	Count Maddox	Parts for sale (Private Classifieds)	18	05-09-2014 01:52 PM
[WTB] 2009-2013 nismo front bumper cover.	deuce189	Parts for sale (Private Classifieds)	0	11-21-2013 10:50 PM
Base/Sport to Nismo conversion/FRONT BUMPER Cost breakdown	370zFORme!!	DIY Section (Do-It-Yourself)	19	02-11-2013 12:41 PM
2009 nismo front bumper	ocean.mirage	Exterior & Interior	6	07-30-2010 10:31 AM