Looks good, get him to paint the black line back on the top of the bumper where it meets the trunk (it should have been masked off) or it will look funny.

http://image.automobilemag.com/f/478...ismo-trunk.jpg

but wasn't OEM painted the same way though?

Apparently there is meant to be pre applied masking tape on the top of the bumper, but mine didn't come with it either.

It's so that the black trim line from the trunk flows through the hatch area if that makes sense?

Mine didn't have the masking tape but there is a faint line on top which indicates the area to be left unpainted.

Sorry typed the previous message on my phone and it auto corrected a load of words ��.

You'll see what I mean when you put the lights back in.

Totally :confused:

Sorry. Edited my reply.

So can you verify the parts that are necessary for the rear conversion?

Sent from my SM-N920V using Tapatalk

I'll confirm when i get the bumper back from the paint shop :tup:

From what I know it will go straight on, but there are NISMO specific wheel arches. If there's a significant gap between the stock arches and the bumper i'll get them.

Thanks!

Sent from my SM-N920V using Tapatalk

Is the rear diffuser nismo grey on the mag black model?

Sent from my SM-N920V using Tapatalk

How do you mean?

[IMG]http://uploads.tapatalk-cdn.com/2016...81a39b79d6.jpg[/IMG]

You can see here that the section under the red stripe looks Grey. .or at least it does to me. Is this oem paint scheme?

Sent from my SM-N920V using Tapatalk

Yes it is a gunmetal colour. I think the code is somewhere in this thread.

K51? Do you know of anywhere else it's gunmetal?

Sent from my SM-N920V using Tapatalk

....

They also report the red accent color to be A15 but another user reports that it's a force/cayenne red peral, NAH code.

http://i.imgur.com/eoLE6Z5.jpg


Sent from my SM-N920V using Tapatalk

https://scontent-atl3-1.xx.fbcdn.net...12&oe=56FD1409

https://scontent-atl3-1.xx.fbcdn.net...ed&oe=56FD37C2

https://scontent-atl3-1.xx.fbcdn.net...b1&oe=56FD4D32

Looks awesome!!!! Can we get a close up on your custom LED setup?

And parts used please (LED).

Looks GREAT

:tup::owned::tup:

Will you do mine?

It looks like you did a two color paint job with PW and gloss black. Is that true?

Not true. It's just an illusion, the black is actually white.

+1 for the LED part number..

http://uploads.tapatalk-cdn.com/2016...a5afab1eed.jpg

I'll take some nice photos when it gets warmer outside.

This is now, getting ready to install my new FI carbon fiber CBE!


Sent from my iPhone using Tapatalk

Stock is three color, white, flat black and a grey with flecks and has no gloss black. The pic is not well lit.

Cool toy was being sarcastic.

Sent from my SM-N920V using Tapatalk

http://s12.postimg.org/e8xtokx31/128..._7865193_o.jpg

http://s9.postimg.org/f539lpsfj/1289...10608714_o.jpg

http://s29.postimg.org/4ka9qyhyv/128...11803902_o.jpg

Nissan badge was shaved and Nismo holes Shaved. All black is Gloss black.

Guys, i was not a fan of the 4-5 circle LED's by carbon signal or evo-r, which led's come from ebay. So unfortunately sourced my own Led from yes, Ebay. However the reviews were good and has 1 year warranty on the bulbs. I wanted a Led setup with lens, and was not about to pay 1600 at the dealer. Thats why i wens this route.

I made a template our of cardboard, for the lens and repoduced the shape out of wood, yes a thin 1/4 inch piece of craft wood. Sealed it and primed it so there should not be any swelling. Sealed,Primed, sanded, primed, and painted. I have $50 in the whole setup, and about 2 days work. Im pretty happy with the outcome.

Search on ebay for LUMEN 7.5 led and you should find it, same light ranges from $24-65 for the pair. I dont think there is a difference.

I'll pay you to make me some black ones:tiphat:

How are they secured? Pics of the back?

Im not making any more then it wouldnt be custom :tiphat:

I uses some galvanized steel and made 2 small L bends and used the stock mounting location.

maybe ill snap a pic when i install my Splitter this weekend.

Thank you.

:iagree: :tup:

Well done!

That looks really good!

I've got a set of the EVO-R DRL on my way to the UK.

My plan is to try and mount them deeper into the bumper as they sit pretty much flush then - I'm going to get the black plastic plated in plastic chrome at a place near me, finally fit some sort of clear diffuser/lens over the top so it looks more OEM and less "stuck on".

I've also got a set of "Ring - Lyra" DRL's that I purchased, I may see if I can hack these to get a better look.

http://www.halfords.com/motoring/bul...day-night-lamp

those custom LEDs look sooooooo good! Props dude, great job.

I like the gloss black, but I would like better pics. The DRLs are great.

I did gloss black as well but I wish I did all matte black.

Why is that? I am trying to decide.

I like the gloss black because it looks clean but I'm in the desert man and it gets dirty fast. I think matte will help a lot with keeping it looking nice.

Thanks. I will probably go with flat.