370z 2013 LED Day lights Kit

juventino · 11-12-2013, 02:07 AM

Hi Guys,

I have a 370z 2013, which is equipped with daytime LED Lights, which are on during the day, and off during the night, the LED day lights cannot be turned on along with the normal headlights, so I came across this Kit from ijdmtoy.com, which enables the LED day lights to be on with the normal headlights and there is a clear installation guide on the second link

I am not an expert in this subject, and I'm looking for some advice if this is OK to be done on a car and if anyone knows about any disadvantages for doing this I would appreciate the feedback

Kit:
Nissan 370Z LED Daytime Running Light Enable Kit with Parking Lights

Installation Guide:
Installation Guide for Nissan 370Z LED DRL Enable Kit

Cheers!

cooltoy · 11-12-2013, 07:36 PM

Subbed.

zilverbullet · 11-15-2013, 05:16 PM

Sub for interest! Might even pick it up for a try... $25 bucks,....

RoadsterST · 12-12-2013, 05:34 AM

So all you need is 2 wire taps and a length of wire. They threw in 2 led's and called it a kit.
Thanks for posting the instructions though. I will be splicing mine together this weekend.

exsanity · 12-12-2013, 05:39 AM

Subbed, I'm interested in knowing the benefits of the DTR lights being on with the headlights.

RoadsterST · 12-12-2013, 07:23 AM

Quote:

Originally Posted by exsanity

Subbed, I'm interested in knowing the benefits of the DTR lights being on with the headlights.

Just the coolness factor.. the HID headlights will overpower the led's

GalletGun · 12-12-2013, 01:40 PM

Has anyone tried this yet?

I may be wrong but if you can successfully do this and you are splicing into the parking light wires, the daytime running LEDs will not turn on during the day if you use the Auto heads lights function. They will only turn on if u manually switch it.

I would think the other DIY is better where you connect both harnesses together for the LED daytime running Lights and run a new power wire into the cabin from the passenger side and wire it to a 12 volt connection i.e cigarette lighter.

Catchin-Z's · 12-12-2013, 06:09 PM

Subbed,
Peaks my interest for sure

m3chhawk · 12-12-2013, 09:16 PM

I'm 95% sure you don't need a "kit" to pull this off. You should just need a $0.10 Radio Shack diode.

If someone can get me the wiring diagram for the main harness connector on a 2013, I can write it up and we can collab on a DIY. If it's setup like I think it is, you can do this in 5 min, no splicing, 100% reversible, for less than a dollar.

GalletGun · 12-13-2013, 10:06 AM

I am a salesperson at a Nissan dealership. I talked to the tech in the back that deals with all the electrical stuff. He said it wont be that easy. Something about the LED running lights dont draw alot of power so they are probably connectly directly to the BCM or something....whatever he said ...I am sure he knows what he is talking about b/c it went straight over my head. haha

He said hes gonna try hooking my 370z up to the computer and see if theres a way he can reprogram the computer to make the LED's turn on during the night before he helps me attempt anything involving cutting, tapping, or breaking. lol

m3chhawk · 12-13-2013, 10:08 AM

Doubtful. They will still be fused and there will still be a signal wire. Now I could see them using the signal wire to power the LEDS, but a diode at the main harness connector would still be the most simple, least invasive solution.

GalletGun · 12-13-2013, 10:18 AM

If his "reprogramming" attempt doesnt work, I willl ask him if he can get me the wiring diagram so I can give it to you. Everything you said went over my head too. lol

andre12031948 · 12-13-2013, 10:36 AM

I bought a 2012 because I don't care for the entire front of the 13's/14's.

m3chhawk · 12-13-2013, 11:31 AM

Quote:

Originally Posted by GalletGun

If his "reprogramming" attempt doesnt work, I willl ask him if he can get me the wiring diagram so I can give it to you. Everything you said went over my head too. lol

A diode only allows electricity to flow one way. So you take one similar to the middle one in the picture below with longer leads and wedge it in the pin on the harness "from" the low beam pin "to" the DRL pin. If you want them on with highs as well, just run a second diode from the high beams. I did this on my truck and when the high beams are on, so are the lows, fogs, parking, and DRLs. It's like the 4th of July.

RoadsterST · 12-13-2013, 12:19 PM

Quote:

Originally Posted by GalletGun

Has anyone tried this yet?

I may be wrong but if you can successfully do this and you are splicing into the parking light wires, the daytime running LEDs will not turn on during the day if you use the Auto heads lights function. They will only turn on if u manually switch it.

I would think the other DIY is better where you connect both harnesses together for the LED daytime running Lights and run a new power wire into the cabin from the passenger side and wire it to a 12 volt connection i.e cigarette lighter.

You're not cuttting the original power to the led's so they should still turn on automatically. What looks like will happen is without a diode, the led's, when on, will also power the drl's, and visa versa. .

11-12-2013, 02:07 AM	#1 (permalink)
juventino Base Member Join Date: Sep 2013 Location: DXB Posts: 6 Drives: 13 Nissan 370Z RD AT Rep Power: 11	370z 2013 LED Day lights Kit Hi Guys, I have a 370z 2013, which is equipped with daytime LED Lights, which are on during the day, and off during the night, the LED day lights cannot be turned on along with the normal headlights, so I came across this Kit from ijdmtoy.com, which enables the LED day lights to be on with the normal headlights and there is a clear installation guide on the second link I am not an expert in this subject, and I'm looking for some advice if this is OK to be done on a car and if anyone knows about any disadvantages for doing this I would appreciate the feedback Kit: Nissan 370Z LED Daytime Running Light Enable Kit with Parking Lights Installation Guide: Installation Guide for Nissan 370Z LED DRL Enable Kit Cheers! RafPR and Catchin-Z's like this. Last edited by juventino; 11-12-2013 at 02:21 AM.

11-12-2013, 07:36 PM	#2 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,937 Drives: 14 PW 370Z S/T MT Rep Power: 240204	Subbed. Last edited by cooltoy; 11-15-2013 at 07:24 PM.

11-15-2013, 05:16 PM	#3 (permalink)
zilverbullet Track Member Join Date: Mar 2013 Location: Bay Area, CA Posts: 668 Drives: a silver bullet Rep Power: 15	Sub for interest! Might even pick it up for a try... $25 bucks,.... __________________ '13 & Infinity Swifts Z1 Post-MAF F.I. NST *VARIS* Tommy Kaira AeroJacket MotorDyne

12-12-2013, 05:34 AM	#4 (permalink)
RoadsterST Enthusiast Member Join Date: Nov 2013 Location: Wylie, TX Posts: 446 Drives: 2013 roadster ST Rep Power: 12	So all you need is 2 wire taps and a length of wire. They threw in 2 led's and called it a kit. Thanks for posting the instructions though. I will be splicing mine together this weekend. Footloose301 likes this.

12-12-2013, 05:39 AM	#5 (permalink)
exsanity Premium Member Join Date: Oct 2013 Location: Middle Tennessee Posts: 10,499 Drives: you mad.. Rep Power: 3699	Subbed, I'm interested in knowing the benefits of the DTR lights being on with the headlights. __________________ \| F.I. NonRes Carbon CBE \| F.I. High Flow Cats \| Hotchkis Sway Bars \| KW Variant 3 \| SPL Suspension Parts \|

12-12-2013, 01:40 PM	#7 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 11	Has anyone tried this yet? I may be wrong but if you can successfully do this and you are splicing into the parking light wires, the daytime running LEDs will not turn on during the day if you use the Auto heads lights function. They will only turn on if u manually switch it. I would think the other DIY is better where you connect both harnesses together for the LED daytime running Lights and run a new power wire into the cabin from the passenger side and wire it to a 12 volt connection i.e cigarette lighter. Last edited by GalletGun; 12-12-2013 at 06:16 PM.

12-12-2013, 06:09 PM	#8 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 11	Subbed, Peaks my interest for sure

12-12-2013, 09:16 PM	#9 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	I'm 95% sure you don't need a "kit" to pull this off. You should just need a $0.10 Radio Shack diode. If someone can get me the wiring diagram for the main harness connector on a 2013, I can write it up and we can collab on a DIY. If it's setup like I think it is, you can do this in 5 min, no splicing, 100% reversible, for less than a dollar. KaienZ34 and Joker_J like this. __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

12-13-2013, 10:06 AM	#10 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 11	I am a salesperson at a Nissan dealership. I talked to the tech in the back that deals with all the electrical stuff. He said it wont be that easy. Something about the LED running lights dont draw alot of power so they are probably connectly directly to the BCM or something....whatever he said ...I am sure he knows what he is talking about b/c it went straight over my head. haha He said hes gonna try hooking my 370z up to the computer and see if theres a way he can reprogram the computer to make the LED's turn on during the night before he helps me attempt anything involving cutting, tapping, or breaking. lol

12-13-2013, 10:08 AM	#11 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	Doubtful. They will still be fused and there will still be a signal wire. Now I could see them using the signal wire to power the LEDS, but a diode at the main harness connector would still be the most simple, least invasive solution. __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

12-13-2013, 10:18 AM	#12 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 11	If his "reprogramming" attempt doesnt work, I willl ask him if he can get me the wiring diagram so I can give it to you. Everything you said went over my head too. lol

12-13-2013, 10:36 AM	#13 (permalink)
andre12031948 Banned Join Date: Feb 2011 Location: monticello new york 127 Posts: 1,095 Drives: 08 350z black 6m/t Rep Power: 0	it's only MY taste so don't get affended I bought a 2012 because I don't care for the entire front of the 13's/14's.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: 2013 370z LED daytime running lights at night and day	synolimit	DIY Section (Do-It-Yourself)	13	12-24-2016 09:28 AM
[FOR SALE] 2013 Tail Lights	rhood	Parts for sale (Private Classifieds)	6	04-18-2015 09:10 PM
Trade 2013 370Z Nismo for 2013 G37 IPL Convertible?	13nismo370z	Nismo 370Z	18	08-18-2013 10:48 PM
[FOR SALE] 2013 Tail Lights	rhood	Parts for sale (Private Classifieds)	0	05-28-2013 09:46 AM
OEM 370z Tail lights FS or Tinted Tail Lights.	daisuke149	Parts for sale (Private Classifieds)	14	01-02-2011 04:55 AM