Ings +1 Wing

synolimit · 09-13-2013, 07:17 PM

Quote:

Originally Posted by dimitarm

After 3 months of waiting to be made i finally got my ings wing...I ordered it with regular 160mm mounts and i think i made a mistake, i should have taken the low 40 mm mounts...whatever, its here now and waiting to be mounted on my 370z :P
i will post more pictures when i finish it

Better function with the 160's

dimitarm · 09-14-2013, 02:06 AM

We mounted the wing on the car directly without the 160mm mounts...
be honest and tell me what you do, dont like

Mr&Mrs · 09-14-2013, 02:11 AM

Actually not bad at all IMO, but that wing is for performance, and now it is suffering. Kind of a waste of money.

GaleForce · 09-14-2013, 08:19 AM

Needs to be raised. Still a nice spoiler.

XwChriswX · 09-14-2013, 05:51 PM

It needs to be raised. It wasn't meant to sit that low. Honestly, I'd bite the bullet and order a set of the low mounts and use those for Daily, and switch to the high mounts for any sort of HPDE/Track days. Either that, or sell the high mounts...

And it just so happens I know someone who has the same wing and wouldn't mind having a set of high mounts one day...

synolimit · 09-14-2013, 07:25 PM

Raise.

dimitarm · 09-15-2013, 02:02 AM

yea i know it needs to be raised but i cant find low mounts, they arent selling anywhere and the japs dont want to make them for me...what do you suggest?
is there anyone who can make them for me?

synolimit · 09-15-2013, 02:12 AM

Quote:

Originally Posted by dimitarm

yea i know it needs to be raised but i cant find low mounts, they arent selling anywhere and the japs dont want to make them for me...what do you suggest?
is there anyone who can make them for me?

Didn't it come with low mounts? Any machine shop can make them.

dimitarm · 09-15-2013, 02:25 AM

Quote:

Originally Posted by synolimit

Didn't it come with low mounts? Any machine shop can make them.

yep i will try to find someone here in my country to make them

nismo 1234 · 09-15-2013, 10:48 PM

i can buy your 160m mounts if you want to sell it!

dimitarm · 09-17-2013, 02:10 AM

ill post pictures in few days with low mounts installed

Japanjay · 09-17-2013, 05:08 PM

Actually that wont be that bad for high speed runs. More like a drag spoiler height. You can take about 18" length pieces of yarn and tape them to the wing along the length of it and gopro the results. You will see where the spoiler is making contact with the stream of air going over the car. That is no higher than what pops up on the 911's, if not a little bit more.

XwChriswX · 09-17-2013, 07:18 PM

Quote:

Originally Posted by dimitarm

yea i know it needs to be raised but i cant find low mounts, they arent selling anywhere and the japs dont want to make them for me...what do you suggest?
is there anyone who can make them for me?

Which vendor did you go through? iNGS should be able to send a set of low mounts (at cost)...

Quote:

Originally Posted by synolimit

Didn't it come with low mounts? Any machine shop can make them.

When I ordered mine, I was given the option of low or high mounts. I chose low... Were you given such a choice?

dimitarm · 09-18-2013, 12:48 AM

Quote:

Originally Posted by XwChriswX

Which vendor did you go through? iNGS should be able to send a set of low mounts (at cost)...

When I ordered mine, I was given the option of low or high mounts. I chose low... Were you given such a choice?

ive ordered from japanparts.com

before i sent the payment to them, the agent asked me if i want low or high mounts and i said high because he said that they are 160mm, but they are higher actualy...and after 2 months when i asked him if i can change the mounts he told me that ings cant change them becaue once the order is made they cant change it....

ive made my own low brakets so i will be posting pictures in a few days

OMGWTFBBQ · 09-19-2013, 09:31 AM

Quote:

Originally Posted by XwChriswX

It needs to be raised. It wasn't meant to sit that low. Honestly, I'd bite the bullet and order a set of the low mounts and use those for Daily, and switch to the high mounts for any sort of HPDE/Track days. Either that, or sell the high mounts...

And it just so happens I know someone who has the same wing and wouldn't mind having a set of high mounts one day...

Quote:

Originally Posted by XwChriswX

When I ordered mine, I was given the option of low or high mounts. I chose low... Were you given such a choice?

Maybe someone with the low mounts.. should trade with the OP for their high mounts..

09-14-2013, 02:11 AM	#18 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	Actually not bad at all IMO, but that wing is for performance, and now it is suffering. Kind of a waste of money. Reaper42 and speedfreek like this. __________________ Project Z <--Click - Check out the link too many mods to list!

09-14-2013, 08:19 AM	#19 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Needs to be raised. Still a nice spoiler. XwChriswX and Mr&Mrs like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

09-14-2013, 05:51 PM	#20 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	It needs to be raised. It wasn't meant to sit that low. Honestly, I'd bite the bullet and order a set of the low mounts and use those for Daily, and switch to the high mounts for any sort of HPDE/Track days. Either that, or sell the high mounts... And it just so happens I know someone who has the same wing and wouldn't mind having a set of high mounts one day... OMGWTFBBQ and Mr&Mrs like this. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

09-14-2013, 07:25 PM	#21 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Raise. osbornsm likes this. __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EXCLUSIVE INGS Front Lips \| Z-Power Wing	vividracing	Body Interior/Exterior	139	01-31-2014 06:07 PM
sunline gt wing VS ings+1 z power wing.	nismo 1234	Exterior & Interior	4	06-15-2011 05:57 PM
INGS+1 Rear Wing pre-order	370Ztune	Exterior & Interior	42	01-03-2011 03:40 PM
new ings z-power wing, opinions?	boomboom	Exterior & Interior	24	02-08-2010 11:08 AM

09-15-2013, 02:02 AM	#22 (permalink)
dimitarm Base Member Join Date: Jun 2013 Location: Macedonia Posts: 196 Drives: 370zSportManual Rep Power: 14	yea i know it needs to be raised but i cant find low mounts, they arent selling anywhere and the japs dont want to make them for me...what do you suggest? is there anyone who can make them for me?

09-15-2013, 10:48 PM	#25 (permalink)
nismo 1234 Track Member Join Date: May 2010 Location: Canada BC Posts: 501 Drives: 10 370z M6 40th Rep Power: 15	i can buy your 160m mounts if you want to sell it!

09-17-2013, 02:10 AM	#26 (permalink)
dimitarm Base Member Join Date: Jun 2013 Location: Macedonia Posts: 196 Drives: 370zSportManual Rep Power: 14	ill post pictures in few days with low mounts installed

09-17-2013, 05:08 PM	#27 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Actually that wont be that bad for high speed runs. More like a drag spoiler height. You can take about 18" length pieces of yarn and tape them to the wing along the length of it and gopro the results. You will see where the spoiler is making contact with the stream of air going over the car. That is no higher than what pops up on the 911's, if not a little bit more.