plastiDIPpitty doo dahh....ya i did

Dixnot · 07-11-2013, 02:21 PM

So I decided to do everything in plastidip and it turned out pretty nice... fangs...door handles...wheels...xm antenna...rear diffuser area thing...wing... even the tail lights. Share thoughts and opinions?

speedfreek · 07-11-2013, 02:24 PM

Interested in how you taped off the rear valence when you sprayed it.

1st · 07-11-2013, 02:28 PM

I think you got out of hand. Too much plastic dip is not a good thing. Plastic dip and the big bag of Lays potato chips both have a thing in common. I bet you just can’t have one.

Dixnot · 07-11-2013, 02:31 PM

Quote:

Originally Posted by speedfreek

Interested in how you taped off the rear valence when you sprayed it.

i taped with about 1in overspray above the seam... then when it dried i took a razor blade and carefully slid it along the seam and it did the trick

SCOOBY JOE · 07-11-2013, 02:31 PM

To each his own Pikachu

Dixnot · 07-11-2013, 02:32 PM

Quote:

Originally Posted by 1st

I think you got out of hand. Too much plastic dip is not a good thing. Plastic dip and the big bag of Lays potato chips both have a thing in common. I bet you just can’t have one.

chips make u fat, fat gets u no pu$$y... ladies love plastidip, i use as condoms.

yellogixxer · 07-11-2013, 02:33 PM

I think it looks pretty good, at least from the pics. I always liked the black/yellow combo. I'd like to know how well the tail lights hold up.

Dixnot · 07-11-2013, 02:35 PM

Quote:

Originally Posted by yellogixxer

I think it looks pretty good, at least from the pics. I always liked the black/yellow combo. I'd like to know how well the tail lights hold up.

for the tail lights i did 2 light coats of black and then did 2 heavy coats of clear so it will hold up and peel easy later on when i trade up looks great imo

speedfreek · 07-11-2013, 02:38 PM

Quote:

Originally Posted by Dixnot

i taped with about 1in overspray above the seam... then when it dried i took a razor blade and carefully slid it along the seam and it did the trick

Thanks may give this a shot before getting it permanently painted.

Z370Z011 · 07-11-2013, 02:43 PM

I think you should leave the wing yellow, and if you like the tint, just paint it with some VHT night shade.. But other than that, it looks pretty good. I love how the Z looks in yellow.

Mitco39 · 07-11-2013, 02:57 PM

This is how I did mine. Should have tapped more off in hindsight but it worked well.

Cbtech · 07-11-2013, 03:26 PM

Quote:

Originally Posted by speedfreek

Interested in how you taped off the rear valence when you sprayed it.

Quote:

Originally Posted by Dixnot

i taped with about 1in overspray above the seam... then when it dried i took a razor blade and carefully slid it along the seam and it did the trick

no no no no...dont be usin razors on the paint

. Just use tape to create your lines and on the curves use several cuts of tape to create the curve that you're looking for. when ready to pull the tape get a nice wet spray of dip and peel the paint. no Razors needed just take your time.

Dixnot · 07-11-2013, 03:33 PM

That low in that area u can't really see I don't mind using a blade. Turndled out fine. U can't get those kinda lines in the curve with tape. I'd rather cut

Sent from my SCH-R530M using Tapatalk 2

TheGreatOne · 07-11-2013, 03:41 PM

Wow, didn't know you could do the tailights. Looks pretty good from what I could see

I still have a can I never used. Might use it on the corner of my Carbon fiber side blade to help prevent rock chips

And do the grill on my Subaru.

2sl0w · 07-11-2013, 03:46 PM

Floats like a butterfly and stings like a bee

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

07-11-2013, 02:24 PM	#2 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 20	Interested in how you taped off the rear valence when you sprayed it. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

07-11-2013, 02:28 PM	#3 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1617	I think you got out of hand. Too much plastic dip is not a good thing. Plastic dip and the big bag of Lays potato chips both have a thing in common. I bet you just can’t have one. Chuck33079 and olddudesrule like this.

07-11-2013, 02:31 PM	#5 (permalink)
SCOOBY JOE Base Member Join Date: May 2012 Location: Long Beach Posts: 58 Drives: 11 Nissan 370z PW M6 Rep Power: 15	To each his own Pikachu Scone likes this.

07-11-2013, 02:33 PM	#7 (permalink)
yellogixxer Base Member Join Date: Jan 2012 Location: Reading, Pa Posts: 248 Drives: 07 C6 M6 Cpe Rep Power: 15	I think it looks pretty good, at least from the pics. I always liked the black/yellow combo. I'd like to know how well the tail lights hold up. __________________ '07 C6 6MT Coupe 03 Accord, DD, 400k miles

07-11-2013, 02:57 PM	#11 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 133	This is how I did mine. Should have tapped more off in hindsight but it worked well. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

07-11-2013, 02:43 PM	#10 (permalink)
Z370Z011 A True Z Fanatic Join Date: Jul 2012 Location: Los Angeles CA Posts: 1,052 Drives: PearlWhite 370z 6MT Rep Power: 16	I think you should leave the wing yellow, and if you like the tint, just paint it with some VHT night shade.. But other than that, it looks pretty good. I love how the Z looks in yellow.

07-11-2013, 03:33 PM	#13 (permalink)
Dixnot Base Member Join Date: Aug 2012 Location: bedford Posts: 76 Drives: 09 Banana Rep Power: 14	That low in that area u can't really see I don't mind using a blade. Turndled out fine. U can't get those kinda lines in the curve with tape. I'd rather cut Sent from my SCH-R530M using Tapatalk 2

07-11-2013, 03:41 PM	#14 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 48 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 23	Wow, didn't know you could do the tailights. Looks pretty good from what I could see I still have a can I never used. Might use it on the corner of my Carbon fiber side blade to help prevent rock chips And do the grill on my Subaru. __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

07-11-2013, 03:46 PM	#15 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 14	Floats like a butterfly and stings like a bee Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, 2pc Rotors, SP Diff 3.54 FD, Clutch + LW FW + CSC Del \|\| ECUtek e85 w/600cc injectors \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\|