Status seats in a week

GaleForce

I would have ordered Status seats a year ago If I could get a straight answer about fitment in the car. I don't want something that's going to rub the door panels...

Looking forward to seeing you results.

__________________

hyunsoo1803

Not too sure if you could measure from this picture, but it has about a finger gap between

GT Driver / GT-X Passenger

__________________
|Stillen|KW|Volks|Evo-R|Bridgestone|Hotchikis|Project Kics|Southbend|Berk|Status|Innovate|Nismo|Greddy|

Kayzee

Do you know which brackets&side mounts have been used in this picture?

__________________
2010 Sport, Magnetic Black
Top Speed Pro 1 CBE - Swift Spec R - Stillen Splitter - 35% Tint - Tinted tails - 6k HID -ES113 20x10 20x11

hyunsoo1803

Planted seat base (brackets), status side mounts, universal rails.

Personally, I didn't like the seating position with the planted seat base and status side mount. Universal sliders also adds quite a bit of height.

With some research, you should be able to find a different brand that offers lower sitting position. I went with bride FO rails and it fits my "ring" seat with minor modification.

__________________
|Stillen|KW|Volks|Evo-R|Bridgestone|Hotchikis|Project Kics|Southbend|Berk|Status|Innovate|Nismo|Greddy|

Kayzee

very nice. minor modification to the sliders? and what in your eyes is minor?

__________________
2010 Sport, Magnetic Black
Top Speed Pro 1 CBE - Swift Spec R - Stillen Splitter - 35% Tint - Tinted tails - 6k HID -ES113 20x10 20x11

hyunsoo1803

Ok, since I don't have a picture of them on my album, I will try to explain it as best as I can


The side mount should should at least be 90 degrees to make the seat fit better.

If you are inquiring about the FO rails,

Bride FO rails

1. Perfect fit

|............| <- side mount
_________ <- Seat base and rails


2. Fitting Status ring seat

/............\ <- Side mount "slightly bent inwards
_________ <- Seat base and rails



***Although the signs I wrote up there is somewhat deceiving (angle) it is not that much bent. I would guess somewhere between 85 degrees ~ 80 degrees at most.

__________________
|Stillen|KW|Volks|Evo-R|Bridgestone|Hotchikis|Project Kics|Southbend|Berk|Status|Innovate|Nismo|Greddy|

fuct

Nice seats but what happened to your steering wheel? its all wrinkled.

nismo 1234

lol, i asked CF element to make it very thick. and it was hard to wrap it nice with all those foam underneath. so yeh.. haha looks wrinkled but in person its not as bad.

hyunsoo1803

It's not as bad in person, but look wor....



It's as thick as bimmers. Looks nice and fat in person

__________________
|Stillen|KW|Volks|Evo-R|Bridgestone|Hotchikis|Project Kics|Southbend|Berk|Status|Innovate|Nismo|Greddy|

Wiggins3377

Nice looking seats. I see you have the 40th anniversary door panels. How's that red match to the seats?

__________________
AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

nismo 1234

the red seats are a brighter red and door panels are darker red.
they dont match but still blend in just fine