Carbon Fiber Instrument Bezel

Wonka2581 · 05-28-2013, 03:28 AM

Quote:

Originally Posted by CarbonSignal

Hopefully in next two weeks, did something on the part but couldn't continue as had lots of work because of a big shipment leaving of around 70 pieces for US but very soon.

cinellipro · 06-12-2013, 04:13 PM

So I pulled out the face of the fuel/temp gauge. It was easy. Using one hand, don't squeeze too hard and slowly pull it toward you. Once it releases, make sure you are not pulling the light strip that sits just behind the cover. Be aware that Nissan does not sell the gauge cover as an individual part.
I then painted it. It is a big improvement over the silver face.

Now I'm just waiting on the carbon fiber instrument cluster. Yep...just waiting.

kenchan · 06-12-2013, 04:20 PM

Quote:

Originally Posted by cinellipro

So I pulled out the face of the fuel/temp gauge. It was easy. Using one hand, don't squeeze too hard and slowly pull it toward you. Once it releases, make sure you are not pulling the light strip that sits just behind the cover. Be aware that Nissan does not sell the gauge cover as an individual part.
I then painted it. It is a big improvement over the silver face.

Now I'm just waiting on the carbon fiber instrument cluster. Yep...just waiting.

huh, cool. wait, so you just pull on the piece? dont need to take the cluster out or anything?

no snaps or tabs or screws to worry about?

cinellipro · 06-12-2013, 04:30 PM

There are four tabs/snaps/square thingies, but there was no additional resistance. I'm not saying you should do this, but once it pulls off I immediately stopped the pulling motion and turned it to make sure it was not connected to anything. It wasn't. Masked the window and painted the facade, inside and outside sides. It then snapped back in place.

kenchan · 06-13-2013, 10:20 AM

Quote:

Originally Posted by cinellipro

There are four tabs/snaps/square thingies, but there was no additional resistance. I'm not saying you should do this, but once it pulls off I immediately stopped the pulling motion and turned it to make sure it was not connected to anything. It wasn't. Masked the window and painted the facade, inside and outside sides. It then snapped back in place.

^^

thanks.

Chuck33079 · 06-13-2013, 10:21 AM

Quote:

Originally Posted by CarbonSignal

Hopefully in next two weeks, did something on the part but couldn't continue as had lots of work because of a big shipment leaving of around 70 pieces for US but very soon.

Any updates on this?

cinellipro · 08-10-2013, 11:48 AM

Haven't heard anything yet, but considering it's the one interior piece that is most in the visual filed there would be an interest in making it. Gotta be patient.

CarbonSignal · 08-11-2013, 12:42 AM

We have been really busy with new items for Z and some other cars but will try to get it done sometime this month

tanamerra · 08-11-2013, 09:14 AM

When you get caught up i also would be interested in this item. Looking forward to receiving the items i already ordered.

FYI i have been to Dubai several times as well as Abu Dhabi. Enjoyed my visits there.

Shadezz · 08-11-2013, 09:55 AM

Looks like something to consider....I'll keep an eye out for a group buy!!

AreJay · 08-11-2013, 11:25 AM

Looks great

Carbon Fiber Element · 08-11-2013, 01:02 PM

If anyone wanted to rip theres apart they could send it in to us as well to have it wrapped in REAL cf. Hit us up!!!

CarbonSignal · 08-12-2013, 12:02 AM

Quote:

Originally Posted by Carbon Fiber Element

If anyone wanted to rip theres apart they could send it in to us as well to have it wrapped in REAL cf. Hit us up!!!

See there are always options to wrap or replace

Jdmspeed-Z · 09-19-2013, 07:13 PM

UpdAte intrested as well

CarbonSignal · 09-30-2013, 10:28 AM

TEEEEEEASER

06-12-2013, 04:30 PM	#34 (permalink)
cinellipro Base Member Join Date: Jan 2012 Location: florida Posts: 102 Drives: 2009 370Z Rep Power: 13	There are four tabs/snaps/square thingies, but there was no additional resistance. I'm not saying you should do this, but once it pulls off I immediately stopped the pulling motion and turned it to make sure it was not connected to anything. It wasn't. Masked the window and painted the facade, inside and outside sides. It then snapped back in place. kenchan likes this. Last edited by cinellipro; 06-12-2013 at 04:32 PM.

08-10-2013, 11:48 AM	#37 (permalink)
cinellipro Base Member Join Date: Jan 2012 Location: florida Posts: 102 Drives: 2009 370Z Rep Power: 13	Carbon fiber instrument bezel Haven't heard anything yet, but considering it's the one interior piece that is most in the visual filed there would be an interest in making it. Gotta be patient.

08-11-2013, 12:42 AM	#38 (permalink)
CarbonSignal A True Z Fanatic Join Date: Jan 2011 Location: Dubai/California Posts: 2,092 Drives: 370z Rep Power: 20	We have been really busy with new items for Z and some other cars but will try to get it done sometime this month __________________ CS 2018 Summer Nismo NEW GB............MOONBEAM Forum OFFER.....................09-14 CS Nismolipkit Forum OFFER Facebook.... Instagram ....Website

08-11-2013, 09:14 AM	#39 (permalink)
tanamerra Base Member Join Date: May 2010 Location: Delaware Posts: 145 Drives: 2010 370Z Nismo Rep Power: 14	Interested When you get caught up i also would be interested in this item. Looking forward to receiving the items i already ordered. FYI i have been to Dubai several times as well as Abu Dhabi. Enjoyed my visits there. CarbonSignal likes this. __________________ 2010 370Z Nismo Motordyne M370, Injen cai, HKS cbe, Uprev, Work wheels, Radi-Cal brake kit

08-11-2013, 09:55 AM	#40 (permalink)
Shadezz Track Member Join Date: May 2012 Location: Colorado Age: 42 Posts: 896 Drives: 2012 Nissan 370Z Rep Power: 14	Looks like something to consider....I'll keep an eye out for a group buy!! __________________ 2012 370Z BLACK EDITION/ FLT BLK Rays / 5% 3M Tint / DW's / Z1 SS & 2 Piece Rotors Nismo S-Tune OEM / Beluga CBE & Y-PIPE / DDX370 / GTR Start .4 Fluid / NST Blue Kit

08-11-2013, 11:25 AM	#41 (permalink)
AreJay Base Member Join Date: Jan 2012 Location: Norco Posts: 179 Drives: 11 Nissan 370z M6 Rep Power: 13	Looks great

08-11-2013, 01:02 PM	#42 (permalink)
Carbon Fiber Element Track Member Join Date: Oct 2009 Location: nj Posts: 937 Drives: 04 nissan 350z db m6 Rep Power: 198	If anyone wanted to rip theres apart they could send it in to us as well to have it wrapped in REAL cf. Hit us up!!! __________________ http://i329.photobucket.com/albums/l...2623_HDR-1.jpg Text or call 732.754.0423 LIKE US ON FACEBOOK Follow us on Instagram @Carbonfiberelement

09-19-2013, 07:13 PM	#44 (permalink)
Jdmspeed-Z Enthusiast Member Join Date: Apr 2013 Location: Guam Posts: 304 Drives: O7 nissan 370z Rep Power: 12	UpdAte intrested as well

09-30-2013, 10:28 AM	#45 (permalink)
CarbonSignal A True Z Fanatic Join Date: Jan 2011 Location: Dubai/California Posts: 2,092 Drives: 370z Rep Power: 20	TEEEEEEASER simota1, vividracing, Wiggins3377 and 6 others like this. __________________ CS 2018 Summer Nismo NEW GB............MOONBEAM Forum OFFER.....................09-14 CS Nismolipkit Forum OFFER Facebook.... Instagram ....Website

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] carbon fiber fangs and carbon fiber diffuser	ZoroItaliano	Parts for sale (Private Classifieds)	0	12-12-2011 05:04 PM
Carbon fiber steering wheel by Carbon Fiber Element - and other bits	SeeyaBud86	Exterior & Interior	9	03-22-2011 04:23 AM
FS: Seibon Carbon Fiber Front Lip and EVO-R carbon fiber Side Skirts	tabrams31	North West Region	7	03-09-2011 04:56 PM
FS: Seibon Carbon Fiber Front Lip and EVO-R carbon fiber Side Skirts	tabrams31	Parts for sale (Private Classifieds)	20	03-09-2011 04:54 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM