Interest check - ~Kellyefields~ custom hood damper kit

LMBmikeZ · 02-23-2013, 11:03 PM

Quote:

Originally Posted by kellyefields

Until I can figure out why some have no issues and others having issues I am suspending any more sales. I want to ensure each and every one of you that has gotten them already are completely satisfied with these. That is the way I want to be treated and that is the only way I will treat others. For those that have issues please pm me with details of the problem and pics if that will help and what you have done at this point and I will try to dignose the problem. For those that dont have issues but something develops in the future please let me know and I will help you out as well. I am very perplexed as to why some are having problems. The day I did the video I put them on two cars here and filmed the second one and as you can see in the video we had no issues with either set and I just grabbed them from the same lot as those that have been sent out. I do apologize for the problems and I will do what it takes to make it right. I will respond to each and every PM as fast as I can.

you are good man! I think sometimes it is also the installation though sometimes things need a little adjusting. Same goes for body parts for example some people will buy a body kit and say they had perfect fitment and others will say the same kit needed a lot of body work to get right and sit flush etc. It just goes to show that not all cars are the same and not all instals go the same some times a little modification will be needed, like the washer shims

Baer383 · 02-24-2013, 10:35 AM

This is the same problem I had with my Z1 shocks and this is what I did to fix it.(this what I wrote on Z1's thread)

Yeah it took awhile b/c the shocks are painted so they can't touch ,I heated up the plastic covers and bend them down then shot compressed air on them to cool them to stay in shape.

NitrousZ34 · 02-24-2013, 08:43 AM

Kelly I sent mine via the post office and it should be there by Tuesday they said. I will try the washer trick when i recieve the new strut. Hopefully it was just a bad strut because I really liked the way these looked on the car.

NitrousZ34 · 02-25-2013, 08:42 PM

I installed my hood strut today, the right side is perfect, and the left side has SLIGHT hood bulge. It's barely there. Any idea on how to lower it down a bit? I was going to snap some pictures but its dark out now. I'll get some tomorrow before I take the car in for the harness bar install.

kellyefields · 02-26-2013, 06:40 AM

Quote:

Originally Posted by NitrousZ34

I installed my hood strut today, the right side is perfect, and the left side has SLIGHT hood bulge. It's barely there. Any idea on how to lower it down a bit? I was going to snap some pictures but its dark out now. I'll get some tomorrow before I take the car in for the harness bar install.

Try raising the stud on that side by putting additional washers. Check and see if fixes the problem. sounds like the strut is bending because of the angle and the plastic. let me know if that helps.

dmhenderson · 02-27-2013, 08:08 AM

Guys - not sure what's going on here but I got my car back last night and I have zero bulge on either side with the damper kit installed. I have to call the body shop to settle up this morning anyway so I'll ask them if they did anything differently.

Edit: Also the damper kit is sweet! Thanks again for doing this.

dmhenderson · 02-27-2013, 02:34 PM

See? No bulge whatsoever (and I'm anal retentive as hell)

Mr&Mrs · 02-27-2013, 04:57 PM

Nice and your car looks siiick!

dmhenderson · 02-27-2013, 05:03 PM

Wait do you have RC brake ducts on your car? I want those so badly.

Mr&Mrs · 02-27-2013, 05:06 PM

Currently no, but brake ducts are on my mid list of things to do.

dmhenderson · 02-27-2013, 05:06 PM

Damper kit open:

dmhenderson · 02-27-2013, 05:07 PM

On my "imminent" list:
-Dual halo mod march/april

On my "wish" list:
-Red chrome "nismo" GT-R emblem
-RC front brake ducts
-Some sort of GTM FI build. Probably supercharged.
-Blowoff valves because sh*tting fire owns

NitrousZ34 · 02-28-2013, 07:32 PM

I went to the shop today to check the progress of my harness bar and I had my fabricator take out my strut bar to get powder coated and I told him to check the dampers and see if he saw anything wrong. I didn't notice this (dumbassss me) but the struts are notching into the plastic right in front of the foam causing them to bend SLIGHTLY. I will attach a picture right now.

NitrousZ34 · 02-28-2013, 07:38 PM

That's the tiny notch.

That's what we are working on ride now.

dmhenderson · 03-01-2013, 11:15 AM

Body shop never got back to me but I've had zero issues

Sent from my iPhone using Tapatalk

02-24-2013, 10:35 AM	#2 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	This is the same problem I had with my Z1 shocks and this is what I did to fix it.(this what I wrote on Z1's thread) Yeah it took awhile b/c the shocks are painted so they can't touch ,I heated up the plastic covers and bend them down then shot compressed air on them to cool them to stay in shape. Nut_N_Much likes this. __________________ 2013 ZL1 754 rwhp 747 rwtq

02-27-2013, 08:08 AM	#6 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Guys - not sure what's going on here but I got my car back last night and I have zero bulge on either side with the damper kit installed. I have to call the body shop to settle up this morning anyway so I'll ask them if they did anything differently. Edit: Also the damper kit is sweet! Thanks again for doing this. LMBmikeZ likes this. __________________

02-27-2013, 02:34 PM	#7 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	See? No bulge whatsoever (and I'm anal retentive as hell) LMBmikeZ and gurneyeagle like this. __________________

02-27-2013, 04:57 PM	#8 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,195 Drives: RZ34 Rep Power: 25229	Nice and your car looks siiick! __________________ Project Z <--Click - Check out the link too many mods to list!

02-27-2013, 05:03 PM	#9 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Wait do you have RC brake ducts on your car? I want those so badly. __________________

02-24-2013, 08:43 AM	#3 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	Kelly I sent mine via the post office and it should be there by Tuesday they said. I will try the washer trick when i recieve the new strut. Hopefully it was just a bad strut because I really liked the way these looked on the car.

02-25-2013, 08:42 PM	#4 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	I installed my hood strut today, the right side is perfect, and the left side has SLIGHT hood bulge. It's barely there. Any idea on how to lower it down a bit? I was going to snap some pictures but its dark out now. I'll get some tomorrow before I take the car in for the harness bar install.

02-27-2013, 05:06 PM	#10 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,195 Drives: RZ34 Rep Power: 25229	Currently no, but brake ducts are on my mid list of things to do. __________________ Project Z <--Click - Check out the link too many mods to list!

02-27-2013, 05:06 PM	#11 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Damper kit open: Mr&Mrs likes this. __________________

02-27-2013, 05:07 PM	#12 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	On my "imminent" list: -Dual halo mod march/april On my "wish" list: -Red chrome "nismo" GT-R emblem -RC front brake ducts -Some sort of GTM FI build. Probably supercharged. -Blowoff valves because sh*tting fire owns __________________

02-28-2013, 07:32 PM	#13 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	I went to the shop today to check the progress of my harness bar and I had my fabricator take out my strut bar to get powder coated and I told him to check the dampers and see if he saw anything wrong. I didn't notice this (dumbassss me) but the struts are notching into the plastic right in front of the foam causing them to bend SLIGHTLY. I will attach a picture right now.

02-28-2013, 07:38 PM	#14 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	That's the tiny notch. That's what we are working on ride now.

03-01-2013, 11:15 AM	#15 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Body shop never got back to me but I've had zero issues Sent from my iPhone using Tapatalk __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evo-R Hood Damper Install	Stealth36	Exterior & Interior	10	06-29-2013 07:11 PM
The Z Store - CF hood damper kit	whittier	Nissan 370Z Roadster (Convertible)	3	01-25-2013 08:17 AM
hood damper kit??? where?	boomboom	Exterior & Interior	4	08-22-2012 06:19 PM
FS: Prosport CF Hood damper set with bracket	kenchan	Parts for sale (Private Classifieds)	14	08-27-2010 12:12 AM